BS EN 16908-2017 Cement and building lime Environmental product declarations Product category rules complementary to EN 15804《水泥和建筑石灰 环境产品声明 EN 15804产品类别规则补充》.pdf

《BS EN 16908-2017 Cement and building lime Environmental product declarations Product category rules complementary to EN 15804《水泥和建筑石灰 环境产品声明 EN 15804产品类别规则补充》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16908-2017 Cement and building lime Environmental product declarations Product category rules complementary to EN 15804《水泥和建筑石灰 环境产品声明 EN 15804产品类别规则补充》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 16908:2017Cement and building lime Environmental productdeclarations Productcategory rules complementaryto EN 15804BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 16908:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation o

2、f EN 16908:2017. The UK participation in its preparation was entrusted to TechnicalCommittee B/516/6, Cement specifications.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a

3、 contract. Users are responsible for its correct application. The British Standards Institution 2017 .Published by BSI Standards Limited 2017ISBN 978 0 580 90745 6 ICS 91.010.99; 91.100.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publ

4、ished under the authority of the Standards Policy and Strategy Committee on 28 February 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16908:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16908 February 2017 ICS 91.010.99; 91.100.10 English Version Cem

5、ent and building lime - Environmental product declarations - Product category rules complementary to EN 15804 Ciment et chaux de construction - Dclarations environnementales sur les produits - Rgles de catgorie de produits complmentaires de lEN 15804Zement und Baukalk - Umweltproduktdeklarationen -

6、Produktkategorieregeln in Ergnzung zu EN 15804 This European Standard was approved by CEN on 21 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alte

7、ration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language mad

8、e by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Eston

9、ia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE F

10、OR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16908:2017 EBS EN 16908:2017EN 1

11、6908:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Abbreviations . 6 5 General aspects 6 5.1 Objective of the Core PCR . 6 5.2 Types of EPD with respect to life cycle stages covered 6 5.3 Comparability of EPD for constr

12、uction products 6 5.4 Additional information . 7 5.5 Ownership, responsibility and liability for the EPD . 7 5.6 Communication formats . 7 6 Product Category Rules for LCA . 7 6.1 Product category . 7 6.2 Life cycle stages and their information modules to be included . 7 6.2.1 General 7 6.2.2 A1-A3,

13、 Product stage, information modules . 7 6.2.3 A4-A5, Construction process stage, information modules . 7 6.2.4 B1-B5, Use stage, information modules related to the building fabric 7 6.2.5 B6-B7, Use stage, information modules related to the operation of the building . 7 6.2.6 C1-C4, End-of-life-stag

14、e, information modules. 8 6.2.7 D, Benefits and loads beyond the system boundary, information module 8 6.3 Calculation rules for the LCA . 8 6.3.1 Functional unit . 8 6.3.2 Declared unit 8 6.3.3 Reference service life (RSL). 8 6.3.4 System boundaries . 8 6.3.5 Criteria for the exclusion of inputs an

15、d outputs . 12 6.3.6 Selection of data 12 6.3.7 Data quality requirements 12 6.3.8 Developing product level scenarios 12 6.3.9 Units 12 6.4 Inventory analysis . 13 6.4.1 Collecting data . 13 6.4.2 Calculation procedures 13 6.4.3 Allocation of input flows and output emissions 13 6.5 Impact assessment

16、 . 14 7 Content of the EPD . 14 7.1 Declaration of general information . 14 7.2 Declaration of environmental parameters derived from LCA . 15 7.2.1 General . 15 7.2.2 Rules for declaring LCA information per module . 16 7.2.3 Parameters describing environmental impacts . 16 BS EN 16908:2017EN 16908:2

17、017 (E) 3 7.2.4 Parameters describing resource use . 16 7.2.5 Other environmental information describing different waste categories and output flows 16 7.3 Scenarios and additional technical information . 16 7.3.1 General . 16 7.3.2 Construction process stage . 16 7.3.3 B1-B7 Use stage . 16 7.3.4 En

18、d-of-life 16 7.3.5 Carbonation in cement-based products . 16 7.3.6 Carbonation in building lime 17 7.4 Additional information on release of dangerous substances to indoor air, soil and water during the use stage 17 7.5 Aggregation of information modules 17 8 Project report . 17 9 Verification and va

19、lidity of an EPD . 17 Bibliography . 23 BS EN 16908:2017EN 16908:2017 (E) 4 European foreword This document (EN 16908:2017) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status of a n

20、ational standard, either by publication of an identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall be withdrawn at the latest by August 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of pat

21、ent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards orga

22、nisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

23、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16908:2017EN 16908:2017 (E) 5 Introduction How to use this document This document provides product category rules (PCR) for Type III environmental decl

24、arations (EPDs) according to EN 15804 14 for cement and building lime, in particular to products according to the standards developed in CEN/TC 51 “Cement and building limes”. The European standard EN 15804, “Core rules for the product category of construction products”, is intended as the core PCR

25、to be followed. This PCR document supplements EN 15804 by giving more detail for specific items relevant to cement and building lime. In all cases where no specific rules are given in this document, EN 15804 should be followed. Therefore, this document should be read in parallel with EN 15804. EN 15

26、804 is normatively referenced in this document and is indispensable for its application. The structure of this document follows that of EN 15804, with all headings and section numbers kept the same. Where a section of EN 15804 applies without modification, this is indicated. Where a section of EN 15

27、804 is not relevant for EPDs covered by this PCR, this is also indicated. The purpose of an EPD is given in the Introduction to EN 15804. Definition of the covered products Cement Cement is defined in standards published by CEN/TC 51 as “a hydraulic binder, i.e. a finely ground inorganic material wh

28、ich, when mixed with water, forms a paste which sets and hardens by means of hydration reactions and processes and which, after hardening, retains its strength and stability even under water”. Building Lime Building lime is defined in EN 459-1 as a “group of lime products, exclusively consisting of

29、two families: air lime and lime with hydraulic properties, used in applications or materials for construction, building and civil engineering.” Air lime refers to the product which combines and hardens with carbon dioxide present in air. Air lime refers to the product which combines and hardens with

30、 carbon dioxide present in air. Air lime has no hydraulic properties. Air lime is divided into two sub-families, calcium lime (CL) and dolomitic lime (DL). Calcium lime is an air lime consisting mainly of calcium oxide (quicklime) and/or calcium hydroxide (hydrated lime). Dolomitic lime is an air li

31、me consisting mainly of calcium magnesium oxide and/or calcium magnesium hydroxide. Lime with hydraulic properties is a building lime consisting mainly of calcium hydroxide, calcium silicates and calcium aluminates. It has the property of setting and hardening when mixed with water and/or under wate

32、r. Reaction with atmospheric carbon dioxide is part of the hardening process. Lime with hydraulic properties is divided into three subfamilies, natural hydraulic lime (NHL), formulated lime (FL) and hydraulic lime (HL). BS EN 16908:2017EN 16908:2017 (E) 6 1 Scope The general scope of the core produc

33、t category rules (PCR) is given in EN 15804:2012+A1:2013, Clause 1. This PCR is primarily intended for the creation of cradle-to-gate EPDs of cement and building lime. In other respects, the scope is as in EN 15804. 2 Normative references As in EN 15804. 3 Terms and definitions For the purposes of t

34、his document the terms and definitions of EN 15804 apply. 4 Abbreviations As in EN 15804. 5 General aspects 5.1 Objective of the Core PCR As in EN 15804. 5.2 Types of EPD with respect to life cycle stages covered As in EN 15804. Cement and building lime are intermediate products with many different

35、final uses. Cement may for example be used in ready-mix concrete, precast concrete, mortar, screed, base treatment for various types of infrastructures, etc. Building lime may for example be used in plasters, renders, masonry mortars, calcium silica bricks, autoclave aerated concrete, soil treatment

36、, asphalt mixtures etc. Therefore, it is generally not possible to provide information about the environmental impacts of the products during the construction process, use, and end of life stages, as this will greatly depend on how the cement or building lime is used. For this reason, this PCR is pr

37、imarily intended to support the creation of cradle-to-gate EPDs, i.e. it focuses on the life cycle stages A1 A3: raw material supply, transport, and manufacturing, although other stages may also be included. Information on other life cycle modules may be provided in an EPD if relevant. Particularly

38、information on carbonation of building limes in the life cycle modules A5 and B1 may be provided in EPDs. If additional stages are included, the modularity principle shall be observed (see 6.3.4.1 of EN 15804:2012+A1:2013) in order to produce consistent EPDs. 5.3 Comparability of EPD for constructio

39、n products As in EN 15804. As cement and building lime are intermediate products, no functional unit can be defined in EPDs for cement and building lime (see 6.3) and therefore no comparisons with other construction products can be made based on EPDs according to this PCR. As stated in EN 15804, “EP

40、D that are not in a building context are not tools to compare construction products and construction services”. BS EN 16908:2017EN 16908:2017 (E) 7 5.4 Additional information As in EN 15804. For additional information on emissions to indoor air, soil and water during the use stage, please refer to t

41、he respective PCR/EPDs for the downstream products such as ready-mix concrete, precast concrete, screed, plasters, masonry mortars, etc. The lime cycle of high calcium lime is shown in Figure 2. 5.5 Ownership, responsibility and liability for the EPD As in EN 15804. 5.6 Communication formats As in E

42、N 15804. 6 Product Category Rules for LCA 6.1 Product category The product category for this PCR is cement and building lime, particularly those covered by the standards developed in CEN/TC 51. 6.2 Life cycle stages and their information modules to be included 6.2.1 General As in EN 15804. In genera

43、l, EPDs according to this PCR will be cradle-to-gate EPDs, i.e. will cover modules A1 A3 only. However, downstream processes (including transport, use and reuse, recycling or recovery) may optionally be declared. As an example, information on carbonation of building limes in the life cycle modules A

44、5 and B1 may be provided in EPDs. 6.2.2 A1-A3, Product stage, information modules As in EN 15804. For a more detailed description of the processes in the product stage of cement and building lime see 6.3.4.2. 6.2.3 A4-A5, Construction process stage, information modules As in EN 15804, not relevant f

45、or cradle to gate EPDs, but relevant for the information on carbonation of building limes (see 6.3.4.3). 6.2.4 B1-B5, Use stage, information modules related to the building fabric As in EN 15804, not relevant for cradle to gate EPDs, but relevant for the information on carbonation of building limes

46、(see 6.3.4.3). 6.2.5 B6-B7, Use stage, information modules related to the operation of the building As in EN 15804, not relevant for cradle to gate EPDs. BS EN 16908:2017EN 16908:2017 (E) 8 6.2.6 C1-C4, End-of-life-stage, information modules As in EN 15804, not relevant for cradle to gate EPDs. 6.2.

47、7 D, Benefits and loads beyond the system boundary, information module As in EN 15804, not relevant for cradle to gate EPDs. 6.3 Calculation rules for the LCA 6.3.1 Functional unit As in EN 15804. As cement and building lime are intermediate products, no functional unit can be defined in EPDs for ce

48、ment and building lime. A declared unit is used as defined in 6.3.2. 6.3.2 Declared unit As in EN 15804. The declared unit is 1 000 kg of cement or building lime. 6.3.3 Reference service life (RSL) As in EN 15804. No RSL is declared for cement or building lime as they are intermediate building produ

49、cts. A reference service life could be declared for downstream products such as ready-mix concrete, precast concrete, screed, plasters, masonry mortars or other building products in which cement and/or building lime are used. 6.3.4 System boundaries 6.3.4.1 General As in EN 15804. Biogenic CO2emissions can be compensated by re-growth of biomass in the short term. Therefore, CO2emissions from biomass fuels (secondary fuels or waste) and the biogenic carbon content of mixed fuels (secondary fuels or waste) shall not be included in the total CO2emissions 10, 11. For