BS EN 14533-2015 Textiles and textile products Burning behaviour of bedding items Classification scheme《纺织材料和纺织产品 床上用品的燃烧性能 分类表》.pdf

《BS EN 14533-2015 Textiles and textile products Burning behaviour of bedding items Classification scheme《纺织材料和纺织产品 床上用品的燃烧性能 分类表》.pdf》由会员分享，可在线阅读，更多相关《BS EN 14533-2015 Textiles and textile products Burning behaviour of bedding items Classification scheme《纺织材料和纺织产品 床上用品的燃烧性能 分类表》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 14533:2015Textiles and textile products Burning behaviour of beddingitems Classification schemeBS EN 14533:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14533:2015. It supersedes BS EN 14533:2003 which is withdrawn.The UK pa

2、rticipation in its preparation was entrusted to Technical Committee TCI/66/-/8, Burning behaviour.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are respo

3、nsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 85958 8 ICS 13.220.40; 97.160 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of t

4、he Standards Policy and Strategy Committee on 28 February 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14533 February 2015 ICS 13.220.40; 97.160 Supersedes EN 14533:2003English Version Textiles and textile product

5、s - Burning behaviour of bedding items - Classification scheme Textiles et produits textiles - Comportement au feu des articles de literie - Systme de classification Textilien und textile Erzeugnisse - Brennverhalten von Bettzeug - Klassifikationsschema This European Standard was approved by CEN on

6、27 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards ma

7、y be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified

8、to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland

9、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Manageme

10、nt Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14533:2015 EBS EN 14533:2015EN 14533:2015 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope 5 2 Normative references 5 3 Basis

11、for classification 5 4 Test methods and acceptance criteria 5 4.1 Test methods 5 4.2 Acceptance criteria 5 5 Classification 5 BS EN 14533:2015EN 14533:2015 (E) 3 Foreword This document (EN 14533:2015) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretaria

12、t of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015 and conflicting national standards shall be withdrawn at the latest by August 2015. Attention is drawn to the

13、 possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14533:2003. This is an editorial revision updating the normative references. Accord

14、ing to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

15、Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14533:2015EN 14533:2015 (E) 4 Introduction This European Standard is one of three close

16、ly related standards for testing and classifying bedding items with regard to their burning behaviour. BS EN 14533:2015EN 14533:2015 (E) 5 1 Scope This European Standard specifies a classification scheme for the burning behaviour of bedding items based on two ignition sources (smouldering cigarette

17、and small open flame). The classification is applied to single bedding items only and not to complete bed assemblies. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only

18、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 12952-1, Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette (ISO 12952-1) EN ISO 12952-2, Textiles - A

19、ssessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalent (ISO 12952-2) 3 Basis for classification The classification scheme is based on the criteria of ignition as listed in EN ISO 12952-1 and EN ISO 12952-2. 4 Test methods and acceptance criteria 4.1 Test met

20、hods The classification scheme refers to all the EN ISO 12952 test methods for the ignitability by a smouldering cigarette and by a small open flame. Materials shall be cleaned before testing as mentioned in EN ISO 12952-1 and EN ISO 12952-2 and the adopted procedure shall be mentioned in the test r

21、eport. 4.2 Acceptance criteria A material passes the ignitability test by a smouldering cigarette in accordance with EN ISO 12952-1 if “non-ignition“ is recorded. A material passes the ignitability test by a small open flame in accordance with EN ISO 12952-2 if “non-ignition“ is recorded. 5 Classifi

22、cation This standard has the following class definitions as given in Table 1. BS EN 14533:2015EN 14533:2015 (E) 6 Table 1 Class definitions Class Class definition A PASSES the ignitability test by a smouldering cigarette PASSES the ignitability test by a small open flame B PASSES the ignitability te

23、st by a smouldering cigarette C FAILS the ignitability test by a smouldering cigarette FAILS the ignitability test by a small open flame This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and ser

24、vices.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers,

25、 innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors cho

26、ose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can

27、 buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be

28、ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted Europe

29、an and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming

30、a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a

31、Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur Briti

32、sh Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAl

33、l the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such inform

34、ation to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permissi

35、on from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW