BS EN 3545-003-2005 Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures - 55 ℃ to 175 ℃ — Part 003 Connectors wi.pdf

《BS EN 3545-003-2005 Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures - 55 ℃ to 175 ℃ — Part 003 Connectors wi.pdf》由会员分享，可在线阅读，更多相关《BS EN 3545-003-2005 Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures - 55 ℃ to 175 ℃ — Part 003 Connectors wi.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIESBS EN 3545-003:2005Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures g55 C to 175 C Part 003: Connectors with female contacts Product standardThe European Standard EN 3545-003:2005 has the st

2、atus of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006, Uncon

3、trolled Copy, (c) BSIBS EN 3545-003:2005This British Standard was published under the authority of the Standards Policy and Strategy Committeeon 28 February 2006 BSI 28 February 2006ISBN 0 580 47887 4National forewordThis British Standard is the official English language version of EN 3545-003:2005.

4、 The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace connectors, which has the responsibility to: aid enquirers to understand the text; present to the responsible internation

5、al/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this subcommittee can be obtained on request to its secreta

6、ry.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogueunder the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue o

7、r of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprise

8、s a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006,

9、 Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 3545-003 November 2005 ICS 49.060English Version Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 003:

10、 Connectors with female contacts - Product standard Srie arospatiale - Connecteurs lectriques, rectangulaires, tanches et non tanches larrire, botier en plastique, verrouillage, tempratures dutilisation - 55 C 175 C - Partie 003 : Connecteurs contacts femelles - Norme de produit Luft- und Raumfahrt

11、- Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehuse, Verriegelungssystem, Betriebstemperaturen von - 55 C bis 175 C - Teil 003: Steckverbinder mit Buchsenkontakten - Produktnorm This European Standard was approved by CEN on 26 September 2005. CEN members are bound to

12、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central

13、 Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the

14、 official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain,

15、 Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Me

16、mbers. Ref. No. EN 3545-003:2005: ELicensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006, Uncontrolled Copy, (c) BSIEN 3545-003:20052Contents PageForeword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.4 4 Required characteristics 4 5 Designation .8 6 Delivery conditions .9 7 Mar

17、king 9 8 Technical specification.9Licensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006, Uncontrolled Copy, (c) BSIEN 3545-003:20053Foreword This European Standard (EN 3545-003:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After en

18、quiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a nat

19、ional standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent righ

20、ts. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republ

21、ic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006, Unc

22、ontrolled Copy, (c) BSI41 Scope This standard specifies connectors with female contacts in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from 55 C to 175 C. These connectors may be used as receptacles (fix

23、ed housings) or plugs (free housings) in conjunction with the following coding and attachment system: male coding and attachment system for mounting on a fixed housing; female coding and attachment system for mounting on a free housing. 2 Normative references The following referenced documents are i

24、ndispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Elements of electrical and optical connection Test methods

25、Part 100: General.EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts.1)EN 3545-001, Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures

26、55 C to 175 C Part 001: Technical specification.EN 3545-002, Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures 55 C to 175 C Part 002: Specification of performance and contact arrangements.3 Terms and defini

27、tions For the purposes of this standard, the terms and definitions given in EN 2591-100 apply. 4 Required characteristics 4.1 Dimensions, mass See Figure 1, Figure 2 and Table 1. Dimensions and tolerances are in millimetres. Mass (without accessory and without contact): non-sealed housing: 19 g max.

28、; sealed housing: 21 g max. 1) Published as AECMA Prestandard at the date of publication of this standard. EN 3545-003:2005Licensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006, Uncontrolled Copy, (c) BSI5Key1 Grommet for rear sealing 2 Female contact 3 14,10 max. for contact arrangement 07 and

29、08 26,1 max. for contact arrangement 16 15 max. for other contact arrangements 4 23 max. for contact arrangement 07 and 08 35 max. for contact arrangement 16 20 max. for other contact arrangements aApplicable dimensions for contact arrangement 07 and 08Figure 1 EN 3545-003:2005Licensed Copy: Wang Bi

30、n, na, Mon May 08 04:00:33 BST 2006, Uncontrolled Copy, (c) BSI6X (3:1) Y (3:1) Non-sealed Sealed version version W (4:1) Grommet dimensions for size 8 cavity Z (3:1) V (15:1) Key1 Rear grommet 2 Female contact 3 Electrical point of female contact, see EN 3545-001. 4 (46,5 2) for contact size 8 (45

31、2) for other contacts aNot applicable for arrangement code 07 and 08 Figure 2 EN 3545-003:2005Licensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006, Uncontrolled Copy, (c) BSI7Table 1 Cavity for contact D E F 22 1,70 1,60 0,97 0,89 1,69 1,62 20 2,03 1,93 1,37 1,27 1,94 1,88 16 2,84 2,73 1,88 1,8

32、0 3,07 3,00 12 3,66 3,56 2,69 2,62 4,29 4,22 10 4,45 4,34 3,48 3,40 5,64 5,54 08 6,85 6,75 5,67 5,59 7,47 7,34 4.2 Recommended panel cut-out for connectors fitted with male coding and attachment system See Figure 3. Maximum thickness of panel: 1,6 Minimum pitch between connectors: 14,2 Figure 3 EN 3

33、545-003:2005Licensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006, Uncontrolled Copy, (c) BSI84.3 Main general characteristics See EN 3545-002. 5 Designation EXAMPLE Description block CONNECTOR, ELECTRICAL Identity block EN3545D01FXB13B Number of the basic standard Type of housing: D: non-sealed

34、 E: sealed Contact arrangement (see EN 3545-002) Type of contact: F: female contact (male housing) Contact connection: X: crimping Type of coding and attachment system: - female for mounting on free housing (plug): A - male for mounting on fixed housing (receptacle): B - coding and attachment system

35、 not delivered: without code Coding 2)(see EN 3545-002): - 1st digit: position of index 1 to 6 for cavity A - 2nd digit: position of index 1 to 6 for cavity B - 00: code not defined - without code, coding and attachment system not delivered Delivery conditions 3)- connector without contacts, with co

36、ding and attachment system: A - connector with contacts (version 1, see Table 2) and coding and attachment system: B - connector with contacts (version 2, see Table 2) and with coding and attachment system: D - connector without contact and without coding and attachment system: without code NOTE If

37、necessary, the code I9005 shall be placed between the description block and the identity block. 2) The coding is given as information for users. 3) Where a connector is ordered with its fittings, these may be delivered not fitted. Not marked on theconnectorEN 3545-003:2005Licensed Copy: Wang Bin, na

38、, Mon May 08 04:00:33 BST 2006, Uncontrolled Copy, (c) BSI96 Delivery conditions The delivered contacts according to the contact arrangements are given in Table 2. The contacts size 8 are always delivered separately. Table 2 Delivery conditions code Delivered with female contactsaVersion 1 B EN 3155

39、-003F2222 EN 3155-015F2018 EN 3155-003F1614 EN 3155-003F1212 EN 3155-003F1010 Version 2 bDEN 3155-015F2020 EN 3155-003F1616 aSee EN 3155-002. bOnly applicable to contact arrangements codes 01, 03 and 04 7 Marking Unless there are other specific contracted requirements, the marking shall include: the

40、 part of identity block as defined in Clause 5; the date of manufacture (year/week); the manufacturers name or trademark. 8 Technical specification See EN 3545-001. EN 3545-003:2005Licensed Copy: Wang Bin, na, Mon May 08 04:00:33 BST 2006, Uncontrolled Copy, (c) BSIBS EN 3545-003:2005BSI389 Chiswick

41、 High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendm

42、ent or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard woul

43、d inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the lates

44、t editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In respons

45、e to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its

46、Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are

47、kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access t

48、o British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardizati

49、on bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symb