BS EN 1038-1996 Identification card systems - Telecommunications applications - Integrated circuit(s) card payphone《识别卡系统 程通信应用 集成电路卡付费电话》.pdf

《BS EN 1038-1996 Identification card systems - Telecommunications applications - Integrated circuit(s) card payphone《识别卡系统 程通信应用 集成电路卡付费电话》.pdf》由会员分享，可在线阅读，更多相关《BS EN 1038-1996 Identification card systems - Telecommunications applications - Integrated circuit(s) card payphone《识别卡系统 程通信应用 集成电路卡付费电话》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 1038:1996 Identification card systems Telecommunication applications Integrated circuit(s) card payphone The European Standard EN 1038:1995 has the status of a British Standard ICS 33.120.00; 35.240.60BSEN 1038:1996 This British Standard, having been prepared under the directi

2、onof the Information Systems Technology Assembly, was published under the authorityof the Standards Boardand comes into effect on 15April 1996 BSI 11-1999 The following BSI references relate to the work on this standard: Committee reference IST/17 Draft for comment 95/643692 DC ISBN 0 580 25417 8 Co

3、mmittees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/17, Identification cards and related devices, upon which the following bodies were represented: Ailec Associates APACS Barclaycard APACS Barclays Bank APACS Girobank APACS

4、 Lloyds Bank APACS Midland Bank APACS Nat West Bank Association for Payment Clearing System (APACS) BT Laboratories Cellnet Consumer Policy Committee of BSI Electricity Association GEC Card Technology HMSO Rochford Thompson Equipment Shell UK Thorn transit systems international Vodafone Ltd. Westing

5、house Cubic Ltd. News Datacom Ltd. Amendments issued since publication Amd. No. Date CommentsBSEN 1038:1996 BSI 11-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 1038 3 List of references Inside back coverBSEN 1038:1996 ii BSI 11-1999 Nation

6、al foreword This British Standard has been prepared by Technical CommitteeIST/17 and is the English language version of EN 1038:1995, Identification card systems Telecommunication applications Integrated circuit(s) card payphone, published by the European Committee for Standardization (CEN). This Br

7、itish Standard is published under the direction of the Information Systems Technology Assembly whose Technical Committee IST/17 has the responsibility to; aid enquirers to understand the text; present to the responsible European committee any enquiries on interpretation, or proposals for change, and

8、 keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard does not p

9、urport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standar

10、d EN 726-1:1994 BS EN 726 Identification card systems Telecommunications integrated circuit(s) cards and terminals Part 1:1995 System overview EN 726-2:1995 Part 2:1996 Security framework EN 726-3:1994 Part 3:1996 Application independent card requirements EN 726-4:1994 Part 4:1995 Application indepe

11、ndent card related terminal requirements EN 726-6:1996 ISO/IEC 7816-5:1994 Part 6:1996 Telecommunication features BS EN ISO/IEC 7816 Identification cards Integrated circuit(s) cards with contacts Part 5:1996 Numbering system and registration procedure for application identifiers Summary of pages Thi

12、s document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 10, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside

13、 front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1038 November 1995 ICS 33.120.00; 35.240.60 Descriptors: Telecommunications, IC cards, IC card payphone, characteristics, utilization, specifications English version Identification card systems Telecommunication applications Integrate

14、d circuit(s) card payphone Systmes de cartes didentification Applications pour les tlcommunications Publiphone carte circuit intgr Identifikationskartensysteme Telekommunikationsanwendungen Telefone mit Bezahlfunktion mittels Chipkarten This European Standard was approved by CEN on 1995-10-04. CEN m

15、embers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applic

16、ation to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has th

17、e same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standard

18、ization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 1038:1995 EEN 1038:1995 BSI 11-1

19、999 2 Foreword This European Standard was prepared by ETSI STC TE9 and adopted by the Technical Committee CEN/TC 224, Machine readable cards, related device interfaces and operations, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard,

20、either by publication of an identical text or by endorsement, at the latest by May 1996, and conflicting national standards shall be withdrawn at the latest by May 1996. In accordance with the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Au

21、stria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Definitions and abbreviations 3 3.1 Definitions 3 3.2 Abbrev

22、iations 4 4 Application independent requirements 4 4.1 Physical requirements for the cardphone 4 4.2 Electronic signals and transmission protocols 4 4.3 Description of commands supported by the cardphone 4 5 Functional requirements for a cardphone 4 5.1 Environmental requirements 4 5.2 Card acceptan

23、ce and reading 4 5.3 Card authentication and card holder verification (CHV) 4 5.4 Secure information transfer 4 5.5 User interface 4 5.5.1 Language for display messages 5 5.5.2 User guidance and error handling 5 5.5.3 Pictograms 5 5.5.4 Audio messages 5 5.6 Basic user operations 5 5.6.1 Removal of t

24、he card 5 5.6.2 Escape possibility 5 5.6.3 CHV-entry 5 Page 5.6.4 CHV-change 5 5.6.5 Language choice/change 5 5.6.6 Choice of payment 5 5.7 Call records 5 5.8 Free calls and emergency calls 5 5.9 Telediagnosis, audit and statistics 5 6 General payphone concepts 5 6.1 General concepts 5 6.1.1 The ext

25、ernal world in control 5 6.1.2 Recognition and selection applications 6 6.1.3 Application management 6 6.2 Relationship between entities 6 6.3 Security provisions 6 6.3.1 Security mechanisms to be used 6 6.3.2 The security module (SM) 7 6.4 Scenarios at the card-external world interface 7 7 Operatin

26、g sequence 7 7.1 Go off-hook 7 7.2 Insertion of the card 7 7.3 Card validation 7 7.4 Select applications 7 7.4.1 Selection of a payment method 7 7.4.2 Selection of telecommunication features 7 7.5 Dial number 7 7.6 Conversation 7 7.7 Follow-on call 7 7.8 Termination of the call 9 7.9 Retrieval of th

27、e card 9 8 Applications used in the payphone application 9 8.1 Payment methods 9 8.2 Telecommunication features 9 Figure 1 SM included in the cardphone 8 Figure 2 SM included in a local concentrator 8 Figure 3 SM in the network 8 Figure 4 Remote SM 9EN 1038:1995 BSI 11-1999 3 1 Scope This European S

28、tandard specifies the application dependent, IC card related characteristics for a payphone application. This European Standard does not define the application independent characteristics. They are defined and described in EN 726-3 and EN 726-4. This European Standard defines the operating procedure

29、s and the minimal cardphone requirements for the card related part of the payphone application. These will: simplify customer use through a common sequence; ensure the inter-European use of IC cards containing the payphone related applications. For this purpose, this Standard describes: how to ensur

30、e, through the payphone application, the entitlement to the invocation of telecommunication features and payment methods; how the payphone application detects which telecommunication features and payment methods are offered by the card; how the payphone application, or the user through the cardphone

31、, can select the different telecommunication features and payment methods offered by the card; the relation to the security module through the payphone; payphone application concepts; the payphone function, only in the sense of voice telephony. 2 Normative references This European Standard incorpora

32、tes by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications listed hereafter. For dated references, subsequent amendments to, or revisions of any of these publications apply to this European St

33、andard only when incorporated in it by amendments or revision. For undated references the latest edition of the publication referred to applies. EN 726-1, Identification card systems Telecommunications integrated circuit(s) cards and terminals Part 1: System overview. EN 726-2, Identification card s

34、ystems Telecommunications integrated circuit(s) cards and terminals Part 2: Security framework. EN 726-3, Identification card systems Telecommunications integrated circuit(s) cards and terminals Part 3: Application independent card requirements. EN 726-4:1994, Identification card systems Telecommuni

35、cations integrated circuit(s) cards and terminals Part 4: Application independent card related terminal requirements. prEN 726-5:1994, Identification card systems Telecommunications integrated circuit(s) cards and terminals Part 5: Payment methods. EN 726-6:1996, Identification card systems Telecomm

36、unications integrated circuit(s) cards and terminals Part 6: Telecommunication features. prEN 726-7, Identification card systems Telecommunications integrated circuit(s) cards and terminals Part 7: Security module. ISO/IEC 7816-5, Identification cards Integrated circuit(s) cards with contacts Part 5

37、: Numbering system and registration procedure for application identifiers. CCITT Recommendation E.113:1988, Validation procedures for an automated international telephone credit card system. CCITT Recommendation E.118:1988, Automated international telephone credit card system. CCITT Recommendation E

38、.121:1988, Pictograms and symbols to assist users of the telephone service. CCITT Recommendation E.133:1988, Operating procedures for cardphones. 3 Definitions and abbreviations 3.1 Definitions For the purposes of this standard, the following definitions apply: 3.1.1 application an application consi

39、sts of a set of security mechanisms, files, data, protocols (excluding transmission protocols), which are located and used in the IC card and outside the IC card (external application) 3.1.2 cardphone a cardphone is a payphone that accepts IC cards as a means of payment 3.1.3 external application en

40、tity, located in the external world, which communicates with the related Card Application during the sessionEN 1038:1995 4 BSI 11-1999 3.1.4 external world all application related entities outside the card 3.1.5 payphone a payphone is a terminal allowing access to telecommunication services after th

41、e insertion of the adequate means of payment. The basic service is to allow outgoing telephone voice calls whether or not it is able to receive incoming voice calls. Outgoing voice calls to certain services may be permitted without payment 3.2 abbreviations for the purposes of this standard, the fol

42、lowing abbreviations apply: 4 Application independent requirements 4.1 Physical requirements for the cardphone Refer to clause 4 of EN726-4:1994 for the following items: mechanical interface between Interface Device (IFD) and Integrated Circuit (IC) Card; contacting of the IC card; user/cardphone in

43、terface; magnetic stripe card reader; card holder verification module; acceptance of memory cards. 4.2 Electronic signals and transmission protocols Refer to clause 5 of EN726-4:1994 for the requirements for the electronic signals and the asynchronous transmission protocols between the IFD and the I

44、C card. 4.3 Description of commands supported by the cardphone Refer to clause 8 of EN 726-4:1994 for a description of the commands used by the payphone application. 5 Functional requirements for a cardphone This clause specifies the card-related requirements for a cardphone. 5.1 Environmental requi

45、rements The definition of the environmental requirements of the different types of payphones is out of the scope of this European Standard. 5.2 Card acceptance and reading The cardphone may be able to accept and to handle one or more types of cards intended for use in the payphone system. 5.3 Card a

46、uthentication and card holder verification (CHV) The cardphone shall be able to determine whether the card and the applications it contains are valid and accessible. If required the cardphone shall also offer the user the possibility to prove to the IC card whether he is the actual owner of the card

47、, or if he is allowed to use it. For this purpose a card holder verification facility can be incorporated in the cardphone (see4.5 of EN726-4:1994). 5.4 Secure information transfer The cardphone and the system shall, to the extent feasible, protect user information from disclosure to unauthorized pa

48、rties. A means for protecting and transferring information (e.g. call records) to other administrative areas for further processing is required. 5.5 User interface The user interface of a cardphone system consists of a number of separate but interrelated input and output functions, including card in

49、put and return, keyboard input, display output, function input or selection. These functions can be performed through physical, visual or audible media. The user interface of the cardphone system shall, to the extent feasible provide the user with guidance and error feedback, in relation to the IC card, via the cardphone. The cardphone shall also be able to accept information supplied by the user for use in relation with the IC card. This includes for exam