BS 6356-13-1997 Spraying equipment for crop protection Air-assisted sprayers Dimensions of nozzle swivel nuts《农作物保护喷雾设备 气动喷雾器 喷嘴旋轴螺母尺寸规格》.pdf

《BS 6356-13-1997 Spraying equipment for crop protection Air-assisted sprayers Dimensions of nozzle swivel nuts《农作物保护喷雾设备 气动喷雾器 喷嘴旋轴螺母尺寸规格》.pdf》由会员分享，可在线阅读，更多相关《BS 6356-13-1997 Spraying equipment for crop protection Air-assisted sprayers Dimensions of nozzle swivel nuts《农作物保护喷雾设备 气动喷雾器 喷嘴旋轴螺母尺寸规格》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6356-13: 1997 ISO 14710: 1996 Spraying equipment for crop protection Part 13: Air-assisted sprayers Dimensions of nozzle swivel nuts ICS 65.060.40BS6356-13:1997 This British Standard, having been prepared under the directionof the Engineering SectorBoard, was published underthe a

2、uthority of the Standards Board and comes intoeffect on 15July1997 BSI 02-1999 ISBN 0 580 27805 0 National foreword This British Standard reproduces verbatim ISO14710:1996 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee AGE/

3、15, Equipment for crop protection, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and Eu

4、ropean developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Sta

5、ndards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible fo

6、r their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO title page, page ii, page1 and a back cover. This standard has been updated

7、 (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBS6356-13:1997 BSI 02-1999 i Contents Page National foreword Inside front cover Foreword ii 1 Scope 1 2 D

8、imensions 1 Figure 1 1 Table 1 1ii blankBS 6356-13:1997 ii BSI 02-1999 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO techn

9、ical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely

10、with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least75% of

11、the member bodies casting a vote. International Standard ISO14710 was prepared by Technical Committee ISO/TC23, Tractors and machinery for agriculture and forestry, Sub-committee SC6, Equipment for crop protection. Descriptors: Agricultural equipment, crop protection, crops treatment equipment, agri

12、cultural sprayers, nozzles, sprayer nozzles, swivels, nuts (fasteners), dimensions.BS6356-13:1997 BSI 02-1999 1 1 Scope This International Standard specifies the outer dimensions of the swivel nuts of nozzles for air-assisted sprayers. NOTEThe nozzle output is very often determined when testing air-

13、assisted sprayers. It is necessary to fit measurement devices to the swivel nuts to collect the liquid. If the outer dimensions of the nuts are standardized, the number of fitting pieces can be reduced and testing is then simplified. The defined dimensions simplify the fitting of measurement devices

14、 to the swivel nuts (for example, for the determination of the nozzle output). 2 Dimensions The swivel nuts shall be conical with outer dimensions that correspond toFigure 1 andTable 1. Table 1 Figure 1 Dimensions in millimetres d 0,1 l min. 25 15 30 15 35 15 40 15BSI 389 Chiswick High Road London W

15、4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is

16、 the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sur

17、e that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsi

18、ble, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, interna

19、tional and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise re

20、quested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and serv

21、ices. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Te

22、l: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, st

23、ored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or g

24、rade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.