ASTM F3264-2017 Standard Specification for Normal Category Aeroplanes Certification《普通类别飞机证书的标准规格》.pdf
《ASTM F3264-2017 Standard Specification for Normal Category Aeroplanes Certification《普通类别飞机证书的标准规格》.pdf》由会员分享,可在线阅读,更多相关《ASTM F3264-2017 Standard Specification for Normal Category Aeroplanes Certification《普通类别飞机证书的标准规格》.pdf(6页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: F3264 17Standard Specification forNormal Category Aeroplanes Certification1This standard is issued under the fixed designation F3264; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number
2、in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 Applicability:1.1.1 This specification identifies the industry standardswhich have been determined by consensus to demonstratecompliance to th
3、e requirements (“the Rules”) for Level 1, 2, 3,4 Normal Category Aeroplanes.1.1.2 Unless specifically defined otherwise, the herein ref-erenced specifications are only applicable to the aeroplanesdefined in 1.1.1.1.1.3 Only standards that are considered mature enough forgeneral application to certif
4、ication projects and have beenfound acceptable by committee consensus to propose to theCAAs for acceptance as a Means of Compliance to their Rulesare included.1.1.4 In the event that a particular CAAs requirements arenot harmonized with the other CAAs requirements, the stan-dards will be written to
5、include the non-harmonized require-ments as well as the harmonized requirements with theapplicability defined in the standard.1.2 Civil Aviation Authorities:1.2.1 CAAs may accept a specific revision of this specifi-cation as an acceptable Means of Compliance (MoC) to theirrequirements. Acceptance an
6、d applicability as a MoC to theCAAs airworthiness rules remains the decision of the respec-tive CAAs. CAAs may accept this specification, with orwithout limitations as defined in their specification acceptancedocument. For information on which CAAs have acceptedthese standards (in whole or in part)
7、as an acceptable MoC totheir Rules, refer to the ASTM F44 webpage (www.astm.org/COMMITTEE/F44.htm) which includes CAA website links.1.3 Applicant Responsibility:1.3.1 The applicant must seek individual guidance fromtheir respective CAA concerning the use of this specificationand any referenced Speci
8、fications, Practices, Test Methods, orGuides to show compliance to the CAA rules. Alternatively, anapplicant may propose a MoC other than those included in thisspecification but it is their responsibility to obtain approval oftheir proposed MoC from their CAA.1.4 This international standard was deve
9、loped in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade (TBT) Committee.2. Referenced Doc
10、uments2.1 ASTM Standards:2NOTE 1Referenced ASTM standards are listed in Sections 510ofthis specification.F2490 Guide for Aircraft Electrical Load and Power SourceCapacity AnalysisF3060 Terminology for AircraftF3061/F3061M Specification for Systems and Equipment inSmall AircraftF3062/F3062M Specifica
11、tion for Installation of PowerplantSystemsF3063/F3063M Specification for Design and Integration ofFuel/Energy Storage and Delivery System Installations forAeroplanesF3064/F3064M Specification for Control, Operational Char-acteristics and Installation of Instruments and Sensors ofPropulsion SystemsF3
12、065/F3065M Specification for Installation and Integrationof Propeller SystemsF3066/F3066M Specification for Powerplant Systems Spe-cific Hazard MitigationF3082/F3082M Specification for Flight for General AviationAeroplanesF3083/F3083M Specification for Emergency Conditions,Occupant Safety and Accomm
13、odationsF3093/F3093M Specification for Aeroelasticity Require-mentsF3114 Specification for StructuresF3115/F3115M Specification for Structural Durability forSmall AirplanesF3116/F3116M Specification for Design Loads and Condi-tions1This specification is under the jurisdiction ofASTM Committee F44 on
14、 GeneralAviation Aircraft and is the direct responsibility of Subcommittee F44.10 onGeneral.Current edition approved Sept. 1, 2017. Published September 2017. DOI:10.1520/F3264-17.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org.
15、 For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United StatesThis international standard was developed in accordance with internat
16、ionally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.1F3117 Specification for Crew Interface in AircraftF
17、3120/F3120M Specification for Ice Protection for GeneralAviation AircraftF3173/F3173M Specification for Handling Characteristicsof AeroplanesF3174/F3174M Specification for Establishing OperatingLimitations and Information for AeroplanesF3179/F3179M Specification for Performance ofAeroplanesF3180/F31
18、80M Specification for Low-Speed Flight Charac-teristics of AeroplanesF3227/F3227M Specification for Environmental Systems inSmall AircraftF3228 Specification for Flight Data and Voice Recording inSmall AircraftF3229/F3229M Practice for Static Pressure System Tests inSmall AircraftF3230 Practice for
19、Safety Assessment of Systems andEquipment in Small AircraftF3231/F3231M Specification for Electrical Systems inSmall AircraftF3232/F3232M Specification for Flight Controls in SmallAircraftF3233/F3233M Specification for Instrumentation in SmallAircraftF3234/F3234M Specification for Exterior Lighting
20、in SmallAircraftF3235 Specification for Electrical Storage Batteries in SmallAircraftF3236 Specification for High Intensity Radiated Field(HIRF) Protection in Small Aircraft2.2 Federal Aviation Administration (FAA) Regulations:14 CFR 23, Amendment 64 Airworthiness Standards:Normal, Utility, Acrobati
21、c, and Commuter Category Air-planes32.3 European Aviation Safety Agency (EASA) Regulations:CS 23, Amendment 5 Normal, Utility, Aerobatic, and Com-muter Aeroplanes4NOTE 2The above regulations and requirements are not directlyreferenced in the specification but are the “relevant applicable regulations
22、”referred to in the Rules definition in 3.2.2.3. Terminology3.1 Unique and Common TerminologyTerminology usedin multiple standards is defined in F3060,Aircraft TerminologyStandard. Terminology that is unique to this specification isdefined in this section.3.2 Definitions:3.2.1 Means of Compliance (M
23、oC)a method or processwhich is used to show that a rule has been complied withthrough either design, analysis, test, or a combination ofdesign, analysis and test.3.2.2 Rulesuniversal reference to the relevant applicableregulations or standards governing airworthiness requirementsfor Normal Category
24、Aeroplanes issued by the CAAs.3.3 Abbreviations:3.3.1 CAACivil Aviation Authority3.3.2 MoCMeans of Compliance4. General4.1 Regulatory Applicability and Definitions:4.1.1 See the applicable CAA Rules for specific CAAsApplicability and Definitions. There are currently no standardswritten or anticipate
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMF32642017STANDARDSPECIFICATIONFORNORMALCATEGORYAEROPLANESCERTIFICATION 普通 类别 飞机 证书 标准 规格 PDF

链接地址:http://www.mydoc123.com/p-540198.html