ASTM F2463-2012 Standard Terminology for Livestock Meat and Poultry Evaluation Systems.pdf

《ASTM F2463-2012 Standard Terminology for Livestock Meat and Poultry Evaluation Systems.pdf》由会员分享，可在线阅读，更多相关《ASTM F2463-2012 Standard Terminology for Livestock Meat and Poultry Evaluation Systems.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: F2463 12Standard Terminology forLivestock, Meat, and Poultry Evaluation Systems1This standard is issued under the fixed designation F2463; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A nu

2、mber in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This terminology contains related definitions and de-scriptions of terms used or likely to be used in livestock, meat,and poultry evaluat

3、ion standards. The purpose of terminologyis to promote clear understanding and interpretation of thestandards in which they are used.1.2 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to estab

4、lish appro-priate safety and health practices and to determine theapplicability of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2F2340 Specification for Developing and Validating Predic-tion Equation(s) or Model(s) Used in Connection withLivestock, Meat, and Poultry

5、Evaluation Device(s) orSystem(s) to Determine ValueF2341 Practice for User Requirements for Livestock, Meat,and Poultry Evaluation Devices or SystemsF2342 Specification for Design and Construction of Com-position or Quality Constituent Measuring Devices orSystemsF2343 Test Method for Livestock, Meat

6、, and Poultry Evalu-ation DevicesF2925 Specification for Tenderness Marketing Claims As-sociated with Meat Cuts Derived from Beef3. Terminologyaccurate, adjwhen performance or value of a device, asdetermined by tests made with a suitable reference material,conforms to the standard within the allowab

7、le tolerance.F2341, F2343carcass, nharvested livestock or poultry, whether eviscer-ated or not. F2341, F2343DISCUSSIONA carcass may or may not be split into separate sides,one or both sides may be measured or evaluated.carcass primal, nbasic major cuts into which carcassesand sides are separated.car

8、cass subprimal, nsmaller cuts derived from primalcuts.evaluation device, nequipment designed to measure com-position or quality constituents used to determine the valueof live animals, carcasses, and individual cuts of meat.F2340, F2341, F2342, F2343evaluation system, ndevice or group of devices use

9、d tomeasure and record composition or quality constituents usedto determine the value of live animals, carcasses, andindividual cuts of meat. F2340, F2341, F2342, F2343independent third party, nunbiased person or entity that isknowledgeable with subject matter expertise.F2340, F2343livestock, ncattl

10、e, sheep, swine, goat, horse, mule, or otherequine. F2341, F2342, F2343longissimus, nmuscle that arises as the middle and largestentity of the sacrospinal muscles that is attached by some ofits fibers to the lumbar vertebrae, inserted into all thethoracic vertebrae, and depresses the ribs and extend

11、s thespinal column and bends it to one side. F2340, F2925meat, nedible product(s) harvested by the livestock orpoultry packing industries. F2341, F2342, F2343poultry, nchickens, turkeys, ducks, geese, and other domes-ticated fowl. F2341, F2342, F2343quality constituents, nmeasurable characteristic,

12、such as,but not limited to pH, marbling, tenderness, or color.F2342, F2343value, commerce, nmeasure of economic worth in com-merce. F2340, F2341, F23434. Keywords4.1 livestock; meat; poultry; evaluation systems1This terminology is under the jurisdiction of ASTM Committee F10 onLivestock, Meat, and P

13、oultry Evaluation Systems and is the direct responsibility ofSubcommittee F10.50 on Terminology.Current edition approved Aug. 1, 2012. Published October 2012. Originallyapproved in 2005. Last previous edition approved in 2006 as F2463 06. DOI:10.1520/F2463-12.2For referenced ASTM standards, visit th

14、e ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,

15、United States.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of su

16、ch rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for addi

17、tional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to th

18、e ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).F2463 122