ANSI Z97.1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用美国国家标准.安全性能规范和测试方法》.pdf

《ANSI Z97.1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用美国国家标准.安全性能规范和测试方法》.pdf》由会员分享，可在线阅读，更多相关《ANSI Z97.1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用美国国家标准.安全性能规范和测试方法》.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、 Copyright 2009 Accredited Standards Committee (ASC) Z97 (all rights reserved), ANSI Z97.1-2009 American National Standard for safety glazing materials used in buildings safety performance specifications and methods of testStandard ANSI Z97.1-2009 25 West 43rdStreet, New York, New York 10036 Copyrig

2、ht American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ ANSI Z97.1-2009 Copyright 2009 Accredited Standards Committee (ASC) Z97 (all rights reserved), ANSI Z97.1-2009 i ANSI Z97.1 2009 Revis

3、ion of ANSI Z97.1-2004e American National Standard for Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test Secretariat Glazing Industry Secretariat Committee Approved by Accredited Standards Committee (ASC) Z97 November 2009 American National Standards

4、Institute, Inc. Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ ANSI Z97.1-2009 Copyright 2009 Accredited Standards Committee (ASC) Z97 (all rights reserved), ANSI Z97.1-2009

5、ii AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standa

6、rds Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward th

7、eir resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether they have approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the stand

8、ards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the Ameri

9、can National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Sta

10、ndards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of approval. Purchases of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute.

11、Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ ANSI Z97.1-2009 Copyright 2009 Accredited Standards Committee (ASC) Z97 (all rights reserved), ANSI Z97.1-2009 iii Published by

12、 Glazing Industry Secretariat Committee www.ANSIZ Distributed by Glazing Industry Secretariat Committee www.ANSIZ, and American National Standards Institute 25 West 43rd Street, New York, New York 10036 Copyright 2009 by Accredited Standards Committee (ASC) Z97 All rights reserved. No part of this p

13、ublication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproducti

14、on or networking permitted without license from IHS-,-,-_ ANSI Z97.1-2009 Copyright 2009 Accredited Standards Committee (ASC) Z97 (all rights reserved), ANSI Z97.1-2009 iv FORWARD (This forward is not part of ANSI Z97.1-2009) This standard was developed under procedures accredited as meeting the cri

15、teria for American National Standards. The consensus committee that approved the Standard was balanced to ensure that individuals from competent and concerned interests have had an opportunity to participate. It was developed within the approved scope as stated in section 1.1 of the standard. This S

16、tandard is available for public review on a continuing basis. This provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. The use of an addenda system will allow revisions made in response to public review or committee actions to be

17、 published as required. This standard, which is the result of extended and careful consideration of available knowledge and experience on the subject, is intended to provide minimum requirements that are recommended for use, adoption, enforcement by federal, state and local authorities and by model

18、codes. It is recommended that this standard be referenced but not incorporated in any statute. This Standard does not recommend where safety glazing should be used or, when it is used, what type of glazing material should be used. For this information one should consult other codes, standards and ma

19、nufacturers information. Neither the standards committee nor the secretariat feel that this standard is perfect or in its ultimate form. It is recognized that, although safety-glazing materials are widely used and accepted, new developments are to be expected and revisions of the standards are neces

20、sary as the art progresses and further experience is gained. This standard is a successor standard to the 2004e edition. The 2004e standard succeeded those of the 1984 (reaffirmed in 1994), 1975, 1972 and 1966 editions. In order for material to be considered for reference or to continue to be refere

21、nced in the ANSI Z97.1 standard, it shall meet the following criteria: 1. The referenced material, including title and date, and the manner in which it is to be utilized shall be specifically identified in the text of ANSI Z97.1. 2. The standard or portions of a standard intended to be enforced shal

22、l be written in mandatory language. 3. The scope or application of the reference material shall be clearly described. 4. The referenced material shall not have the effect of requiring proprietary materials. 5. The standard shall not prescribe a proprietary agency for quality control or testing. For

23、communication with the Committee please refer to the following page. Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ ANSI Z97.1-2009 Copyright 2009 Accredited Standards Commit

24、tee (ASC) Z97 (all rights reserved), ANSI Z97.1-2009 v CORRESPONDENCE WITH ASC Z97 COMMITTEE General. ANSI Codes and Standards are developed and maintained with the intent to represent the consensus of concerned interests. As such, users of this Standard may interact with the Committee by requesting

25、 interpretations, proposing revisions, and attending Committee meetings. Correspondence should be addressed to: Secretary, Z97 Main Committee c/o Julia Schimmelpenningh Solutia Inc. 730 Worcester St. Springfield, MA 01151 JCSCHIS Proposing Revisions. Revisions are made periodically to the Standard t

26、o incorporate changes that appear necessary or desirable, as demonstrated by the experience gained from the application of the Standard. Approved revisions will be published periodically. The Committee welcomes proposals for revisions to this Standard. Proposals should be as specific as possible: ci

27、ting the paragraph number(s), the proposed wording and a detailed description of the reasons for the proposal. Pertinent documentation should be included. Interpretations. On written request, the ASC Z97 Committee will render an interpretation of any requirement of the Standard. The request for inte

28、rpretation should be clear and unambiguous. The following format is recommended: Subject: Cite the applicable paragraph number(s) and provide a concise description. Edition: Cite the edition of the Standard for which the interpretation is being requested. Question: Phrase the question as a request f

29、or an interpretation of a specific requirement suitable for general understanding and use, not a request for an approval of a proprietary design or situation. Requests that are not in the above format may be rewritten by the Committee or its Secretary prior to being answered, which may inadvertently

30、 change the intent of the original request. The Committee reserves the right to deem certain requests for interpretations as not within its scope or expertise and refuse to address them. The committee reserves the right to reconsider any interpretation when or if additional information, which might

31、affect that original interpretation, becomes available to the Committee. Persons aggrieved by an interpretation may appeal to the Committee for reinterpretation. The ASC Z97 does not “approve,“ “certify,“ “rate,“ or “endorse,“ any item, construction, proprietary device, or activity beyond what is ad

32、dressed in the Standard. Attending Committee Meetings. The ASC Z97 holds meetings that are open to the public. Persons wishing to attend any meeting should contact the Secretary of the Committee or www.ANSIZ for meeting information. Copyright American National Standards Institute Provided by IHS und

33、er license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ ANSI Z97.1-2009 Copyright 2009 Accredited Standards Committee (ASC) Z97 (all rights reserved), ANSI Z97.1-2009 vi DISCLAIMER AND CONDITION OF USE The Accredited Standards Committee (“ASC”) Z97 a

34、nd its Secretariat, currently the Glazing Industry Secretariat Committee, have developed this recommended safety performance specification and test method for glazing materials through a consensus standards development process the American National Standards Institute has approved. This process brin

35、gs together volunteers representing varied view points and interests to achieve consensus on safety related issues. While the ASC Z97 and its Secretariat administer the process in accordance with ANSI established rules designed to promote fairness in the development of consensus, neither the ASC Z97

36、 nor its Secretariat independently tests, evaluates, or verifies the accuracy of any information or the soundness of any judgments contained within the document, ANSI Standard Z97.1. The ASC Z97, together with its members, affiliates, and its Secretariat, expressly disclaim and shall not be liable f

37、or any personal injury, property or other damage of any nature, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this document, whether based upon breach of contract, breach of warranty, tort (including neglige

38、nce), strict liability, or otherwise, even if advised of the possibility of such damages. The foregoing negation of damages is a fundamental element of the use of the information and data contained herein, and this information and data would not be developed, compiled, and forwarded by ASC Z97 to AN

39、SI without such limitation. The ASC Z97, together with its members, affiliates, and its Secretariat, also make no guarantees or warranties, express or implied, including without limitation, any and all warranties concerning the accuracy or completeness of the information in the document, its fitness

40、 or appropriateness for a particular purpose or use, its merchantability, and its non-infringement of any third partys intellectual property rights. Together, they make no representations or warranties regarding the informations compliance with any other applicable statute, rule, law, or regulation.

41、 Building codes vary from jurisdiction to jurisdiction, and those using this document must consult the most current version of the applicable building code in effect in the jurisdiction where the glazing material is to be installed for restrictions or limitations upon the use of glazing materials te

42、sted to this document, ANSI Standard Z97.1. The ASC Z97, together with its members, affiliates, and its Secretariat, disclaim any duty or obligation, except as may be required by established ANSI rules, to update or revise the document based upon provisions of or changes to the building codes. In de

43、veloping this safety performance specification and test method and submitting it to ANSI for approval and publication, neither the ASC Z97, its members, nor its Secretariat is undertaking to render professional or other services for or on behalf of any person or entity. Nor are they undertaking to p

44、erform any duty owed by any person or entity to someone else. Those using this document should rely upon their own independent judgment or, as appropriate, seek the advice of competent professionals in determining the exercise of reasonable care in any given circumstances. Neither the ASC Z97, its m

45、embers, nor its Secretariat has any power, nor do they undertake, to police or enforce compliance with the contents of this document. Nor do they list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certification or other statement of compliance

46、with the requirements of this document shall not be attributable to ASC Z97 and is solely the responsibility of the certifier or maker of this statement. This standard was processed and approved for submittal to ANSI by the Accredited Standards Committee Z97. Committee approval of the standard does

47、not necessarily imply that all Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ ANSI Z97.1-2009 Copyright 2009 Accredited Standards Committee (ASC) Z97 (all rights reserved), ANSI Z97.1-2009 vii committee members voted for its approval. At the time the ASC Z97 approved this standard, the ASC Z97 had the following members: Kevin Olah, Chair Julia Schimmelpenningh, Secretary Organ