ANSI NEMA C136.12-2014 For Roadway and Area Lighting Equipment Mercury Lamps Guide for Selection.pdf

《ANSI NEMA C136.12-2014 For Roadway and Area Lighting Equipment Mercury Lamps Guide for Selection.pdf》由会员分享，可在线阅读，更多相关《ANSI NEMA C136.12-2014 For Roadway and Area Lighting Equipment Mercury Lamps Guide for Selection.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.12-2014Roadway and Area Lighting Equipment Mercury Lamps Guide for SelectionANSI C136.12-2014 Revision of ANSI C136.12-2004 (R2009) American National Standard For Roadway and Area Lighting Equipment Mercury Lamps Guide

2、for Selection Secretariat: National Electrical Manufacturers Association Approved January 28, 2014 Published April 10, 2014 American National Standards Institute, Inc. ANSI C136.12-2014 Page ii 2014 National Electrical Manufacturers Association NOTICE AND DISCLAIMER (ANSI Accredited Standards Commit

3、tee) The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the de

4、velopment of this document. ANSI standards, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this public

5、ation. As Secretary of the ANSI Accredited Standards Committee, NEMA administers the process in accordance with the procedures of the American National Standards Institute to promote fairness in the development of consensus. As a publisher of this document, NEMA does not write the document and it do

6、es not independently test, evaluate or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special

7、, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and discl

8、aims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturers or sellers products or services by virtue of this standard or guide. In publishing and making t

9、his document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment o

10、r, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional vi

11、ews or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test or inspect products, designs or installations for safety or health purposes. Any certification or other stateme

12、nt of compliance with any health or safetyrelated information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C136.12-2014 Page iii 2014 National Electrical Manufacturers Association AMERICAN NATIONAL STANDARD Appro

13、val of an American National Standard requires verification by ANSI. ANSI states that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantia

14、l agreement has been reached by directly and materially affected interests. Substantial agreement means significantly more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and a concerted effort be made toward their resolution. Th

15、e use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether they have approved the standards or not, from: manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The America

16、n National Standards Institute does not develop standards, and will under no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National

17、Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Instit

18、ute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Ass

19、ociation 1300 North 17th Street, Suite 900, Rosslyn, VA 22209 Copyright 2014 by National Electrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Art

20、istic Works, and the International and Pan American Copyright Conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, and without the prior written permission of the publisher. Printed in the United States of America. ANSI C136.12-2014

21、Page iv 2014 National Electrical Manufacturers Association ANSI C136.12-2014 Page v 2014 National Electrical Manufacturers Association TABLE OF CONTENTS Foreword vi 1 Scope . 1 2 Normative References 1 3 Informative References 1 4 General Description And Information . 1 4.1 Circuit Compatibility 1 4

22、.2 Lamp Requirements 1 4.3 Ballast Requirements 1 4.4 Series Retrofit Ballast Requirements 2 4.5 Lamp And Ballast Compatibility 2 4.6 Lamp Life And Lumen Ratings 2 4.7 Lamp Base 2 Table 1 Standard Mercury Lamps . 2 ANSI C136.12-2014 Page vi 2014 National Electrical Manufacturers Association FOREWORD

23、 At the time this standard was approved the ANSI C136 committee was composed of the following members: Alabama Power American Electric Lighting Caltrans Ceravision City of Kansas City, Missouri City of Los Angeles, Bureau of Street Lighting Duke Energy Duke Energy Florida Eatons Cooper Lighting Edis

24、on Electric Institute EPRI EYE Lighting International of N.A., Inc. Florida Power and Light FRE Composites (2005) Inc. GE Lighting Systems Georgia Power Company Gulf Power Company Hapco Aluminum Pole Products Holophane An Acuity Brands Company Hubbell Lighting, Inc. Inovus Solar Inc. JEA Kauffman Co

25、nsulting, LLC LED Roadway Lighting LITES LUXIM Corporation Mississippi Power National Grid OSRAM SYLVANIA Inc. Philips HADCO Philips LUMEC PNNL ROAM/DTL SELC Lighting Shakespeare Composite Structures South Carolina Electric & Gas Co. Southconn Technologies, Inc. StressCrete Ltd/King Luminaire Co., I

26、nc. Sunrise Technologies, Inc./FP Outdoor Lighting Controls TE Connectivity Toshiba LED Lighting Systems Division Utility Metals Division of Fabricated Metals, LLC Valmont Structures Vamas Engineering and Consultants Xcel Energy ANSI C136.12-2014 Page 1 2014 National Electrical Manufacturers Associa

27、tion 1 SCOPE This standard covers the selection of mercury vapor lamps recommended for use in roadway and area lighting equipment. 2 NORMATIVE REFERENCES This standard incorporates by undated reference provisions from other publications. These normative references are cited at the appropriate places

28、 in the text, and the publications are listed below. For undated references, the latest edition of the publication referred to applies (including amendments). ANSI_ANSLG C78.40-2011 American National Standard Electric Lamps: Specification for Mercury Lamps ANSI_ANSLG C78.386-1989 (R1994) American Na

29、tional Standard Mercury Lamps: Methods of Measuring Characteristics ANSI_ANSLG C81.61-2009 American National Standard for Electrical Lamp BasesSpecifications for Bases (Caps) for Electric Lamps ANSI_ANSLG C82.4-2002 American National Standard for Lamp BallastsBallasts for High-Intensity Discharge an

30、d Low-Pressure Sodium (LPS) Lamps (Multiple Supply Type) ANSI C82.7-2002 American National Standard, Specifications for Mercury Lamp Transformers, Constant Current (Series) Supply Type Note: ANSI standards are available from Techstreet, 3916 Ranchero Dr., Ann Arbor, MI 48108 Phone: 800-699-9277, Fax

31、 734-780-2046, e-mail: or 3 INFORMATIVE REFERENCES This standard is intended to be used in conjunction with the following publications. The latest edition of the publication applies (including amendments). ANSI_ANSLG C78.380-2007 American National Standard for Electric LampsHigh-Intensity Discharg

32、e (HID)Method of Designation 4 GENERAL DESCRIPTION AND INFORMATION 4.1 Circuit Compatibility Mercury lamps may be operated on either series or multiple circuits with the use of the proper ballast. 4.2 Lamp Requirements The lamps in Table 1 conform to the applicable requirements of ANSI C81.61 and AN

33、SI C78.40. 4.3 Ballast Requirements Lamps listed in Table 1 are intended for use with ballasts meeting the requirements of ANSI C82.4, which apply to ballasts for mercury vapor lamps. ANSI C136.12-2014 Page 2 2014 National Electrical Manufacturers Association 4.4 Series Retrofit Ballast Requirements

34、 Lamps listed in Table 1 are intended for use with ballasts meeting the requirements of ANSI C82.7, which apply to ballasts for series retrofit mercury lamps. 4.5 Lamp and Ballast Compatibility Lamps of other wattage and color in combination with the proper ballast and with the same dimensional char

35、acteristics may be used in the same equipment, provided the operating temperature of the alternate lamp-ballast combinations do not exceed those of the lamp-ballast combinations used in the original equipment. 4.6 Lamp Life and Lumen Ratings The user should consult the lamp manufacturer for lamp lif

36、e and current lumen ratings. 4.7 Lamp Base Lamp bases of brass or another corrosion resistant alloy are recommended. Consult the manufacturer for availability. TABLE 1 STANDARD MERCURY LAMPS Watt Base Bulb Max Length in (mm) L. C. Length in (mm) ANSI Ballast Life Hours Initial Lumen Mean Lumen Coati

37、ng 75 Medium B17 5.4 (138) 3.5 (89) H43 16,000 2700 2250 Coated 100 Medium ED17 5.4 (138) 3.5 (89) H38 18,000 4000 2600 Coated 100 Mogul ED23.5 7.5 (191) 5 (127) H38 24,000 3850 2500 Clear 100 Mogul ED23.5 7.5 (191) 5 (127) H38 24,000 4000 2600 Coated 175 Mogul BT28/ ED28 8.3 (210) 5 (127) H39/M57 2

38、4,000 7850 6830 Clear 175 Mogul BT28/ ED28 8.3 (210) 5 (127) H39/M57 24,000 7800 6800 Coated 250 Mogul BT28/ ED28 8.3 (210) 5 (127) H37/M58 24,000 11,000 8250 Clear 250 Mogul BT28/ ED28 8.3 (210) 5 (127) H37/M58 24,000 11,200 8400 Coated 400 Mogul BT37/ ED37 11.3 (287) 7 (178) H33/M59 24,000 21,000

39、13,400 Clear 400 Mogul BT37/ ED37 11.3 (287) 7 (178) H33/M59 24,000 22,600 14,400 Coated 1000 Mogul BT56 15.1 (383) 9.5 (241) H36/M47 24,000 57,000 28,500 Clear 1000 Mogul BT56 15.1 (383) 9.5 (241) H36/M47 24,000 58,000 29,000 Coated NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB