ANSI American Society of Safety Engineers A10.11-2010 Safety Requirements for Personnel and Debris Nets- American National Standard for Construction and Demolition Operations.pdf

《ANSI American Society of Safety Engineers A10.11-2010 Safety Requirements for Personnel and Debris Nets- American National Standard for Construction and Demolition Operations.pdf》由会员分享，可在线阅读，更多相关《ANSI American Society of Safety Engineers A10.11-2010 Safety Requirements for Personnel and Debris Nets- American National Standard for Construction and Demolition Operations.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI/ASSE A10.11-2010ANSI/ASSEA10.11-2010ANSI/ASSE A10.11-2010Safety Requirements forPersonnel and Debris NetsAmerican National Standardfor Construction andDemolition OperationsAMERICAN SOCIETY OFSAFETY ENGINEERSAMERICAN NATIONAL STANDARDASSEThe information and materials contained in this publicatio

2、n have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal responsibility for the correctness or completeness of this material or its applicat

3、ion to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. ANSI ANSI/ASSE A10.11 2010 American National Standard Construction and Demoli

4、tion Operations Safety Requirements for Personnel and Debris Nets Secretariat American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 Approved November 2, 2010 American National Standards Institute, Inc. Approval of an American National Standard requires verific

5、ation by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected i

6、nterests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their ex

7、istence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in

8、no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the

9、 secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute requires that action be taken periodically to reaffirm, revise, or withd

10、raw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published November, 2010 by American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (84

11、7) 699-2929 www.asse.org Copyright 2010 by American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of Ameri

12、ca American National Standard Foreword (This Foreword is not a part of American National Standard A10.11-2010.) This standard is one of a series of safety standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expecte

13、d that the standards in the A10 series will find a major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Op

14、erations follows. A10.1 Pre-Planning for Construction Safety and Health (under development) A10.2 Safety, Health, and Environmental Training (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10

15、.7 Transportation, Storage, Handling, and Use of Commercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel and Debris Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tun

16、nels, Shafts, and Caissons A10.17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways, and Other Unprotected Edges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe

17、 Construction and Demolition of Wind Generation/Turbine Facilities (under development) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Installation of Drilled Shafts (under development) A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in C

18、onstruction A10.26 Emergency Procedures for Construction Sites (under development) A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Platforms in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Cons

19、truction and Demolition Operations A10.33 Safety and Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Redu

20、ction of Musculoskeletal Problems in Construction A10.41 Equipment Operator and Supervisor Qualifications and Responsibilities (under development) A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Confined Spaces in Construction (under development) A10.44 Lockout

21、/Tagout in Construction A10.46 Hearing Loss Prevention A10.47 Highway Construction Safety A10.48 Communication Tower Erection (under development) A10.49 Control of Health Hazards (under development) One purpose of these standards is to serve as guides to governmental authorities having jurisdiction

22、over subjects within the scope of the A10 Committee standards. If these standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be changed to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for r

23、evisions to this standard. Revisions are made to the standard periodically (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained from the application of the standard. Proposals should be as specific as possi

24、ble, citing the relevant section number(s), the proposed wording, and the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more timely manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an in

25、terpretation of any requirement of the standard. The request for interpretation should be clear, citing the relevant section number(s) and phrased as a request for a clarification of a specific requirement. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretar

26、iat) is authorized to provide any interpretation of this standard. Approval: Neither the A10 Committee nor American National Standards Institute (ANSI) “approves,“ “certifies,“ “rates,“ or “endorses“ any item, construction, proprietary device, or activity. Appendices: Appendices are included in most

27、 standards to provide the user with additional information related to the subject of the standard. Appendices are not part of the approved standard. Committee Meetings: The A10 Committee meets twice a year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard

28、Approval: This standard was processed and approved for submittal to ANSI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessarily imply (nor is it required) that all Committee members voted for its approval.

29、At the time this standard was approved, the A10 Committee had the following members: Richard King, CSP, Chairman James Tomaseski, Vice Chairman Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secretary Jennie Dalesandro, Administrative Technical Support Organization Represented Name of Representative Accid

30、ent Prevention Corporation Frank Burg, CSP Michael Serpe, CSP Aegis Corporation Matthew J. Burkart, P.E. Judith Burkart Alstom Power Robert Renney Ted P. Sharp American Insurance Services Group Thad Nosal James G. Borchardt, CSP, CPE American Work Platform Training, Inc. Dennis W. Eckstine ASCE - Co

31、nstruction Institute Committee Harlan Fair, P.E. William R. Nash, P.E. American Society of Safety Engineers Ken Shorter, CSP, ARM A. David Brayton, CSP, CPC American Wind Energy Association Michele Myers Asbestos Workers International Union Terry Lynch Jim E. Lapping, MS, P.E., CSP Associated Builde

32、rs and Contractors, Inc. Michael W. Hayslip, Esq., P.E., CSP Chris WilliamAssociated General Contractors of America, The Charlie Bird Kevin CannonAssociation of Union Constructors, The William Treharne, P.E. Jeffrey Hardison A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA Barton-Malow Company

33、 Mark Klimbal, CSP, ARM Clayton Shafer Black if unsatis-factory, state reasons and describe corrections performed for each deficiency 5. Dates inspected 6. Test results; if unsatisfactory, state reasons 7. Date removed 8. Disposition and reason The competent person responsible for the nets shall ini

34、tial each entry. 12. TRAINING When personnel nets are used, the employer shall provide appropriate training for the employees so that they will recognize the hazards of falling into nets, and shall instruct them in the procedures to be followed in order to limit potential injury. The training progra

35、m shall include: 1. The test limits of installed nets 2. Avoiding falls 3. Recording and reporting of training 4. Location of inspection rec-ords and the person responsible 5. Refer to ANSI/ASSE Z490.1, Accepted Practices for Safety, Health, and Environmental Train-ing, for more information on SH mo

36、ve, de-energize or erect barrier to prevent contact) (c) Location of sanitary facilities and drinking water (4) Scheduling work for safety (a) Providing for items such as hard hats, life belts, goggles and work vests on the job (b) Establishing liaison among contractors to prevent congestion among t

37、rades (c) Providing temporary flooring, safety nets and scaffolding where required AMERICAN NATIONAL STANDARD A10.11 2010 18 (5) Work procedures (a) Space (b) Equipment such as cranes, hoists, elevators and trucks (c) Rigging procedures (6) Tools and equipment (a) Repair, maintenance and care (b) In

38、spection (c) Supplies of tools for each job (7) Workers and foremen (a) Job assignment (b) Training and supervision (c) Number of workers (d) Plans for maintaining interest in safety: (i) Safety bulletins, record charts and posters (ii) Recognition for groups or individuals (iii) Investigation and r

39、eporting on reportable accidents (iv) Knowledge of safety orders (v) Safety meetings (vi) Specific safety instructions for new employees (e) Establishment of provisions to take immediate action to correct unsafe conditions or acts (f) First aid and medical treatment of injuries (8) Safety meetings (

40、a) Establishment of provisions to take immediate action to correct unsafe conditions or acts (b) First aid and medical treatment of injuries Page Intentionally Left Blank.END USER LICENSE AGREEMENT IMPORTANT - READ CAREFULLY BEFORE DOWNLOADING OR COPYING TO YOUR COMPUTER ANYFILE(S) CONTAINED HEREWIT

41、H. THE STANDARD(S) AND OTHER INFORMATION PROVIDED HEREWITH ARE COPYRIGHTED. BY DOWNLOADING ANY FILE PROVIDED HEREWITH TO YOUR COMPUTER, YOU ARE ACCEPTING AND AGREEING TO THE TERMS OF THIS LICENSE AGREEMENT. IF YOU ARE NOT WILLING TO BE BOUND BY THE TERMS OF THIS LICENSE AGREEMENT, PRIOR TO DOWNLOADI

42、NG OR COPYING TO YOUR COMPUTER ANY FILES(S), YOU MUST DECLINE ACCESS TO SUCH MATERIALS. 1. GRANT OF LICENSE: Subject to the provisions contained herein and to the payment of all applicable fees, the American Society of Safety Engineers (ASSE) grants you a nonexclusive, non-transferable license to th

43、e materials contained herewith (the “Product“). Your licensed rights to the Product are limited to the following: (a) This License Agreement does not convey to you an interest in or to the Product, but only a limited right of use revocable in accordance with the terms of this License Agreement. (b)

44、You may install one copy of the Product on, and permit access to it by, a single computer owned, leased or otherwise controlled by you. In the event that computer becomes dysfunctional, such that you are unable to access the Product, you may transfer the Product to another computer, provided that th

45、e Product is removed from the computer from which it is transferred and the use of the Product on the replacement computer otherwise complies with the terms of this Agreement. Neither concurrent use on two or more computers nor use in a local area network or other network is permitted. You shall not

46、 merge, adapt, translate, modify, rent, lease, sell, sublicense, assign, loan or give to or otherwise transfer any of the Product, or copies thereof, or remove any proprietary notice or label appearing on any of the Product to any individual or entity for any reason or purpose. You may copy the Prod

47、uct only for backup purposes. (c) You acknowledge and agree that the Product is proprietary to the Copyright holder (the “Owner“) identified on the front page of the Product, and is protected under U.S. copyright law and international copyright treaties. You further acknowledge and agree that all ri

48、ght, title and interest in and to the Product, including all intellectual property rights, are and shall remain entirely with the Owner. (d) You shall provide ASSE or any designee of ASSE with all information necessary to assure compliance with the terms of this Agreement. In the event you are not i

49、n compliance with the terms of this Agreement through the actions of unrelated third parties, you shall use your best efforts to cooperate with ASSE and any of its designees to assure compliance. 2. LIMITED WARRANTY: (a) ASSE warrants for your benefit alone that, unless disclosed in the Product to the contrary, ASSE and the Owner can license the Product and all copyright and trademarks related thereto or therein. (b) THE EXPRESS WARRANTIES SET FORTH IN THIS SECTION 2 CONSTITUTE THE ONLY WARRANTIES WITH RESPECT TO THE PRODUCT AND ASSE AND THE OWNER MAKE NO OTHER REPRESENTATION