AIR FORCE MIL-PRF-27720 G-2009 TANK STORAGE LIQUID OXYGEN LIQUID NITROGEN TMU-24 E《TMU-24 E型液氧 液氮储罐》.pdf
《AIR FORCE MIL-PRF-27720 G-2009 TANK STORAGE LIQUID OXYGEN LIQUID NITROGEN TMU-24 E《TMU-24 E型液氧 液氮储罐》.pdf》由会员分享,可在线阅读,更多相关《AIR FORCE MIL-PRF-27720 G-2009 TANK STORAGE LIQUID OXYGEN LIQUID NITROGEN TMU-24 E《TMU-24 E型液氧 液氮储罐》.pdf(33页珍藏版)》请在麦多课文档分享上搜索。
1、 Beneficial comments (recommendations, additions, deletions) and any pertinent data that may be of use in improving this document should be addressed to: WR-ALC 642 CBSG/GBEA, 460 Richard Ray Blvd. Suite 200, Robins AFB, GA 31098. Since contact information can change, you may want to verify the curr
2、ency or this address information using the ASSIST Online database at http:/assist.daps.dla.mil. AMSC N/A FSC 3655 INCH-POUND MIL-PRF-27720G 1 September 2009 SUPERSEDING MIL-PRF-27720F 11 September 2000 PERFORMANCE SPECIFICATION TANK, STORAGE, LIQUID OXYGEN/LIQUID NITROGEN, TMU-24/E This specificatio
3、n is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers two types of skid-mounted, 400-gallon tanks for air transport and storage of liquid oxygen and liquid nitrogen. 1.2 Classification. Tanks covered by this specification ar
4、e of the following types: Type I Liquid Oxygen 400 Gallon Type II Liquid Nitrogen 400 Gallon 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this spec
5、ification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are
6、 listed. 2.2 Government documents. 2.2.1 Specifications and standards. The following specifications and standards form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. Provided by IHSNot
7、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-27720G 2 FEDERAL STANDARDS FED-STD-595 /24052 Green Semigloss FED-STD-595/36118 Gray, Flat or Lusterless COMMERCIAL ITEM DESCRIPTION A-A-50271 Plate, Identification A-A-58092 Tape, Antiseize, Polytetrafluorethyle
8、ne DEPARTMENT OF DEFENSE SPECIFICATION MIL-H-27301 Hose Assembly, Metal, Cryogenic Liquid Transfer MIL-DTL-83413 Connectors and Assemblies, Electrical, Aircraft Grounding, General Specification for DEPARTMENT OF DEFENSE STANDARDS AN929 Cap Assembly, Tube, Pressure Seal MIL-STD-810 Environmental Engi
9、neering Considerations and Laboratory Tests DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-838 Lubrication of Military Equipment MIL-HDBK-1791 Designing for Internal Aerial Delivery in Fixed Wing Aircraft MIL-HDBK-808 Finish, Protective, and Codes for Finishing Schemes for Ground and Ground Support Equipm
10、ent (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch or from the Standardization Document Order Desk, Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2.2 Other Government documents, drawings, and publications. The following other Government docume
11、nts and drawings form a part of this document to the extent specified herein. Unless otherwise specified, the applicable issues are those cited in the solicitation. USAF DRAWINGS 48B7796 Ring Assembly-Tiedown, 10,000 Pounds 68A39469 Plug 68A39470 Body 68A39471 Vacuum Pump Out and Relief Assembly 68A
12、39472 Cap Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-27720G 3 68A39473 Vacuum Pump Out Assembly Filter Assembly 7545352 Requirements for Finishes SA-ALC Ground Support Equipment ORDNANCE CORPS C8987830 Assembly, LOX Coupling, Male Half,
13、All Sizes C8987831 Assembly, LOX Coupling, Female B8987832 Gasket, LOX and LN2, All Sizes B8987833 Gasket, LOX or LN2-Dummy Drawing B8987839 Ring, Retaining A8987840 Ring, Retaining-Dummy Drawing C8987855 Seat, LOX Coupling, 1 inch C8987856 Cone, LOX Coupling C8987857 Nut, LOX Coupling C8987869 Cap,
14、 LOX, 1 inch C8987870 Plug, LOX C8987876 Seat, LN2 Coupling C8987877 Cone, LN2 Coupling C8987878 Nut, LN2 Coupling C8987888 Assembly, Liquid Nitrogen (LN2) Coupling, Male C8987889 Assembly, Liquid Nitrogen (LN2) Coupling, Female C8987890 Cap, LN2 C8987891 Plug, LN2 (Copies of documents and drawings
15、required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) 2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise sp
16、ecified, the issues of these documents are those cited in the solicitation or contract. AMERICAN NATIONAL STANDARDS INSTITUTE/AMERICAN SOCIETY FOR QUALITY (ANSI/ASQ) ANSI/ASQC Z1.4 Sampling Procedures and Tables for Inspection by Attributes (DoD-adopted) (ASNI documents may be obtained at www.ansi.o
17、rg or from American National Standards Institute 25 West 43nd Street, New York, NY 10036.) AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME Boiler and Pressure Vessel Code Section VIII Unfired Pressure Vessels Provided by IHSNot for ResaleNo reproduction or networking permitted without license f
18、rom IHS-,-,-MIL-PRF-27720G 4 (ASME documents may be obtained at www.amse.org or from American Society of Mechanical Engineers, PO Box 2900, Fairfield, NJ 07007.) AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ASTM E 1417 Liquid Penetrant Examination, Standard Practice For (DoD adopted) ASTM E1444
19、 Particle Examination, Magnetic (DoD adopted) (ASTM documents may be obtained at www.astm.org or from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.) SOCIETY OF AUTOMOTIVE ENGINEERS (SAE) SAE ARP901 Bubble-Point Test Method SAE ARP1176 Oxygen Sys
20、tem and Component Cleaning and Packaging SAE AS4395 Tube Connection, Fitting End - Flared, Design Standard (DoD-adopted) SAE AS8090 Equipment, Towed Aerospace Ground, Mobility (DoD adopted) (SAE documents may be obtained at www.sae.org or from Society of Automotive Engineers, 400 Commonwealth Drive,
21、 Warrendale, PA 15096.) 2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws a
22、nd regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in accordance with 4.2. 3.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environ
23、mentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle cost. 3.3 Materials. All materials shall be suitably treated to resist corrosion due
24、 to electrolytic decomposition and any other atmospheric conditions that may be encountered during operational use or storage. The use of toxic chemicals, hazardous substances, or ODCs shall be avoided, whenever feasible (see 4.5.1). Provided by IHSNot for ResaleNo reproduction or networking permitt
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AIRFORCEMILPRF27720G2009TANKSTORAGELIQUIDOXYGENLIQUIDNITROGENTMU24ETMU24E 液氧 液氮 PDF

链接地址:http://www.mydoc123.com/p-428202.html