EN 9300-100-2018 Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 100 .pdf

《EN 9300-100-2018 Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 100 .pdf》由会员分享，可在线阅读，更多相关《EN 9300-100-2018 Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 100 .pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM dataPart 100: Common concepts for Long term archiving and retrieval of CAD 3D mechanical in

2、formationBS EN 9300100:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 9300-100 July 2018 ICS 01.110; 35.240.10; 35.240.30; 49.020 English Version Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 100:

3、 Common concepts for Long term archiving and retrieval of CAD 3D mechanical information Srie arospatiale - LOTAR - Archivage Long Terme et rcupration des donnes techniques produits numriques, telles que CAD 3D et PDM - Partie 100 : Concepts communs pour larchivage long terme et la rcupration des don

4、nes CAD 3D mchanique Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstellung digitaler technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten - Teil 100: Allgemeine Konzepte fr die Langzeitarchivierung und -Bereitstellung von 3D-CAD-Mechanik-Informationen Th

5、is European Standard was approved by CEN on 15 October 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

6、ences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN

7、 member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia

8、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

9、EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 9300-100:2018 ENational forewordThis British Standard is the UK implementation

10、 of EN 9300100:2018.The UK participation in its preparation was entrusted to Technical Committee ACE/1, International and European Aerospace Policy and Processes.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to inc

11、lude all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 63777 3ICS 35.240.10; 35.240.30; 49.020; 01.110Compliance with a British Standard cannot confer immunity fr

12、om legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 9300100:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 9300-100

13、 July 2018 ICS 01.110; 35.240.10; 35.240.30; 49.020 English Version Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 100: Common concepts for Long term archiving and retrieval of CAD 3D mechanical information

14、Srie arospatiale - LOTAR - Archivage Long Terme et rcupration des donnes techniques produits numriques, telles que CAD 3D et PDM - Partie 100 : Concepts communs pour larchivage long terme et la rcupration des donnes CAD 3D mchanique Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstel

15、lung digitaler technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten - Teil 100: Allgemeine Konzepte fr die Langzeitarchivierung und -Bereitstellung von 3D-CAD-Mechanik-Informationen This European Standard was approved by CEN on 15 October 2017. CEN members are bound to co

16、mply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENEL

17、EC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

18、same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou

19、rg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-10

20、40 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 9300-100:2018 EBS EN 9300100:2018EN 9300-100:2018 (E) 2 Contents Page European foreword . 4 Foreword 5 1 Scope 6 2 Normative references 7 3 Terms, definitions and abb

21、reviations . 7 4 Applicability . 10 5 Fundamentals and concepts for Long Term Archiving of CAD 3D mechanical information 10 6 Document structure of EN 9300-1XX family 18 7 Qualification methods for long term preservation of archived CAD information 20 8 Preservation planning of archived CAD informat

22、ion 23 9 Administration and monitoring 25 10 Definition of Archive Information Packages for CAD data 26 (informative) The Evolution of CAD Systems . 33 Annex A(informative) Overview of the main types of CAD 3D mechanical information 34 Annex B(informative) Overview of CAD mechanical assembly structu

23、re information . 37 Annex C(informative) Template for the table of contents of a part of the family EN 9300-1xx 40 Annex D(informative) Considerations for long term preservation of CAD 3D information 42 Annex E(informative) Definition of a representative sample of test cases . 51 Annex F(informative

24、) Example of performance indicators used to manage longevity of CAD Annex Garchived information 54 (informative) Overview of maturity of the main components for long term Annex Harchiving of CAD mechanical information 57 BS EN 9300100:2018EN 9300-100:2018 (E) 3 Figures Page Figure 1 3D annotation .9

25、 Figure 2 Illustration of the major generations of CAD systems 10 Figure 3 Type of CAD essential information to archive, depending on the CAD methods used 12 Figure 4 Links between Use Cases, essential information and EN 9300 1xx parts 13 Figure 5 Different levels of commonality of business requirem

26、ents and use cases 14 Figure 6 Long term preservation of CAD and risk management 16 Figure 7 Migration strategies 17 Figure 8 Detail level of EN 9300 part related to description of fundamentals the document structure of the EN 9300-1XX family, and the links between all these parts; the qualification

27、 methods for long term preservation of archived CAD mechanical information; more specially, principles for the CAD validation properties and for verification of the quality of the CAD archived file; specifications for the preservation planning of archived CAD information; specific functions for admi

28、nistration and monitoring of CAD archived mechanical models; the definition of Archive Information Packages for CAD data. 1.3 Out of Scope The following are out of scope for this part: Long Term Archiving of CAD 2D drawings; other CAD business disciplines, such as piping, tubing, electrical harnesse

29、s, composite, sheet metal design, kinematics. This version does not include: fundamental and concepts for parts EN 9300-120 version 2, EN 9300-125, 1 EN 9300-130. BS EN 9300100:2018EN 9300-100:2018 (E) 7 2 Normative references The following documents are referred to in the text in such a way that so

30、me or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 9300 (all parts), Aerospace series LOTAR LOng Term Archiving and Re

31、trieval of digital technical product documentation such as 3D, CAD and PDM data ISO 10303-203:2011, Industrial automation systems and integration Product data representation and exchange Part 203: Application protocol: Configuration controlled 3D design of mechanical parts and assemblies ISO 10303-2

32、14:2010, Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes ISO 10303-239:2005, Industrial automation systems and integration Product data representation and exchange Part 239: Ap

33、plication protocol: Product life cycle support ISO 16792:2006, Technical product documentation Digital product definition data practices ISO 1101:2004, Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out 3 Terms, definitions and abbr

34、eviations For the purposes of this document, the terms, definitions and abbreviations given in EN 9300-007 and the following apply. In addition EN 9300-100 offers further definitions of common terms as following. ISO and IEC maintain terminological databases for use in standardization at the followi

35、ng addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 CAD 3D mechanical 3D Mechanic CAD covers the definition of the physical shape of a component, the positioning of components within an assembly, and the inform

36、ation about shape - such as tolerances or surface finish - which constrains the results of a manufacturing process, but does not specify the process itself. It may include a record of the geometrical operations, such as trimming a surface, which allow the shape to be subsequently edited, but exclude

37、s parametric design, in which shapes are generated using specific knowledge embedded in the CAD software 3.2 CAD 3D geometry the representation of the geometric aspects of the part or assembly, using concepts such as point, line, cube, etc. Note 1 to entry: For more information: see Annex B. BS EN 9

38、300100:2018EN 9300-100:2018 (E) 8 3.3 CAD 3D topology although some classes of CAD modeller explicitly represent volumes (e.g. Constructive Solid Geometry), many represent volumes indirectly by representing only their surfaces or, in the case of wire frame modellers, only the edges. CAD 3D topology

39、covers the system of relationships needed to interpret a collection of lower dimensional geometric elements as a 3D volume Note 1 to entry: For more information: see Annex B. 3.4 “explicit” representation of a CAD model in the context of engineering and 3D geometrical the term explicit representatio

40、n refers to the mathematical representation of the final result of the CAD model., From the designers point of view, it corresponds to the 3D shape (points, curves, surfaces, solids), together with Geometric Dimensions and Tolerancing Note 1 to entry: Explicit 3D shape may be associated with non-geo

41、metric data including design management meta-data such as layer, colour or group or user defined properties. These non-geometric data are optional, and are added by users and checked and validated by specific tools. 3.5 “implicit” representation of a CAD model CAD model uses an implicit representati

42、on if its geometrical representation is based on a parameterization (e.g. 2D parametric sketches, 3D parametric features such as extrusions of 2D sketches, holes, pockets), together with a set of operations (e.g. extrusion, revolution) or constraints (e.g. perpendicularity, parallelism) Note 1 to en

43、try: The result of the processing of an implicit representation is a CAD 3D explicit representation, which can be used then for geometric operations such as measurement or clash detection. 3.6 3D Geometric Dimensioning 3D geometric dimensioning; 3D geometric tolerances. Note 2 to entry: Dimensioning

44、 information is required to define the characteristics of the 3D explicit model, e.g. in terms of length or height. This additional information may be linked to one geometrical characteristic, e.g. the length of a line. Note 3 to entry: No design geometrical feature can be manufactured to perfection

45、, so the feature description can be extended with tolerance information. Tolerances may come in the form of limits of size applied to given dimensions, with null style tolerance applied directly to dimensions or constraints, such as flatness or parallelism, or a general note. BS EN 9300100:2018EN 93

46、00-100:2018 (E) 9 3.7 Geometrical Product Specifications GPS equivalent to GD the positioning of 3D annotation in the 3D environment of the CAD System is therefore a matter of how best to present the information to the user The following figure shows an example of 3D annotation: Figure 1 3D annotati

47、on 3.9 3D annotations represent Dimension(s), tolerance(s), note(s), text or symbol(s) visible without any manual or external manipulation (see ISO 16792, 3.1) 3.10 types of information: “representation” versus “presentation” 3D representation of a CAD model is a mathematical formulation of a geomet

48、ric shape; the presentation of that formula for a geometric display requires that the representation is rendered by the corresponding shape; the process of rendering requires additional presentation information, such as colour or transparency Note 1 to entry: For example, a curve may be displayed as

49、 a set of pixels of a particular colour in a computer screen. For example, 3D Geometric Dimensioning and Tolerancing may be presented as a set of 3D polylines, however, if the GD Annex B: overview of the main types of CAD 3D mechanical information; Annex C: overview of the main CAD mechanical assembly structure information; Annex E: considerations for long term preservation of CAD 3D information. Figure 2 Illustration of the major generations of CAD systems BS EN 9300