IEC TR 62970-2016 Guidance on how to conduct round robin tests for household and similar electrical appliances《家用和类似用途电器循环试验指南》.pdf

《IEC TR 62970-2016 Guidance on how to conduct round robin tests for household and similar electrical appliances《家用和类似用途电器循环试验指南》.pdf》由会员分享，可在线阅读，更多相关《IEC TR 62970-2016 Guidance on how to conduct round robin tests for household and similar electrical appliances《家用和类似用途电器循环试验指南》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC TR 62970 Edition 1.0 2016-06 TECHNICAL REPORT Guidance on how to conduct round robin tests for household and similar electrical appliances IEC TR 62970:2016-06(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no

2、 part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC co

3、pyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switze

4、rland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept

5、under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Tec

6、hnical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives

7、 information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org Th

8、e worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 e

9、lectrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to

10、 give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC TR 62970 Edition 1.0 2016-06 TECHNICAL REPORT Guidance on how to conduct round robin tests for household and similar electrical appliances INTERNATIONAL ELECTROTECHNICAL

11、COMMISSION ICS 97.030 ISBN 978-2-8322-3488-4 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC TR 62970:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative reference

12、s. 6 3 Terms and definitions 6 4 Process and responsibilities . 7 4.1 Process 7 4.1.1 Product to be tested . 7 4.1.2 Parameters to be tested . 7 4.1.3 Measurement procedure . 8 4.1.4 RRT procedure 8 4.2 Responsibilities . 9 4.2.1 Contracting body 9 4.2.2 Coordinator 9 4.2.3 Subcontractor 9 4.2.4 Fin

13、ancing of RRT . 9 5 Testing laboratories . 9 5.1 Potential laboratories 9 5.2 Announcement 9 5.2.1 General . 9 5.2.2 Questionnaire 9 5.2.3 Assessment of selection of laboratories 10 5.3 Selection of laboratories 10 5.4 Final list of laboratories . 10 6 Transportation of the product . 10 6.1 Logistic

14、s . 10 6.2 Packaging . 10 7 Test 10 7.1 Execution of test . 10 7.2 Laboratory visit . 11 7.3 Transmission of result . 11 8 Analysis, report and termination . 11 8.1 Analysis 11 8.2 Report 11 8.2.1 Draft report 11 8.2.2 Content of the internal report 11 8.3 Termination and publication of final extern

15、al report 11 Bibliography . 13 IEC TR 62970:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ GUIDANCE ON HOW TO CONDUCT ROUND ROBIN TESTS FOR HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standar

16、dization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Inter

17、national Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate

18、 in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between

19、the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications h

20、ave the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any mi

21、sinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nat

22、ional or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services

23、 carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Nationa

24、l Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is d

25、rawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall n

26、ot be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a Technical Report when it has collected data of a different kind from that which is no

27、rmally published as an International Standard, for example “state of the art“. IEC TR 62970, which is a Technical Report, has been prepared by IEC technical committee 59: Performance of household and similar electrical appliances. This Technical Report is based on EN TR 50619:2014. The text of this

28、Technical Report is based on the following documents: Enquiry draft Report on voting 59/627/DTR 59/652/RVC Full information on the voting for the approval of this Technical Report can be found in the report on voting indicated in the above table. 4 IEC TR 62970:2016 IEC 2016 This publication has bee

29、n drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the pu

30、blication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC TR 62970:2016 IEC 2016 5 INTRODUCTION It is the responsibility of each standardization committee testing household and similar electrical ap

31、pliances to establish the repeatability and reproducibility of the measurement standards developed. Results from inter-laboratory comparisons are important for a) identification of interlaboratory differences; b) establishment of the effectiveness and comparability of test or measurement methods; c)

32、 validation of uncertainties; d) evaluation of the performance of laboratories for specific tests or measurements and monitoring laboratories continuing performance; e) identification of problems in laboratories and initiation of actions for improvement which, for example, may be related to inadequa

33、te test or measurement procedures, effectiveness of staff training and supervision, or calibration of equipment; and f) education of participating laboratories based on the outcomes of such comparisons. The need for ongoing confidence in laboratory performance is not only essential for laboratories

34、and their contractors but also for other interested parties, such as regulators, laboratory accreditation bodies and other organizations that specify requirements for laboratories. ISO/IEC 17011 requires accreditation bodies to take account of laboratories participation and performance in proficienc

35、y testing. In this respect, round robin testing was widely made in the past by IEC TC 59 for the development of measurement procedures for the purpose of EU regulatory measures on Labelling and Ecodesign. Round robin test results have been widely taken into account in the establishment of regulation

36、s, in defining tolerance levels for verification of declared values and/or limits. This document is intended to provide a consistent basis for performing round robin testing. It gives guidance to all interested parties to determine the competence among each other. It provides common ground for relia

37、ble statistical data (repeatability and reproducibility levels, etc.) as needed for regulation purposes (like for Labelling and Ecodesign). 6 IEC TR 62970:2016 IEC 2016 GUIDANCE ON HOW TO CONDUCT ROUND ROBIN TESTS FOR HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES 1 Scope This document provides guidanc

38、e for carrying out round robin tests (RRT) and hence for the determination of levels of repeatability (intra-laboratory variability) and reproducibility (inter- laboratory variability) for household and similar electrical appliances. This document can also be used to verify the measurement methods,

39、to improve the measurement method, and to qualify laboratories. It is not applicable for the determination of production variation for a particular product. General advice on proficiency testing of laboratories is given in ISO/IEC 17043. This document can be used in addition to ISO/IEC 17043. NOTE T

40、he repeatability and reproducibility levels are important factors for the establishment of uncertainty margins of the measurement methods and for the definition of tolerance levels in verification schemes. 2 Normative references The following documents are referred to in the text in such a way that

41、some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 17043:2010, Conformity assessment General requirements for p

42、roficiency testing IEC TR 61923, Household electrical appliances Method of measuring performance Assessment of repeatability and reproducibility 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 17043:2010 and the following apply. ISO and IEC maint

43、ain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 contracting body organization or individual for which a round robin testing is provided

44、through a contractual arrangement SOURCE: ISO/IEC 17043:2010, 3.3, modified The term “customer“ has been replaced by “contracting body“. In the definition, “proficiency testing scheme“ has been replaced by “round robin testing“. IEC TR 62970:2016 IEC 2016 7 3.2 repeatability precision under repeatab

45、ility conditions Note 1 to entry: Repeatability can be expressed quantitatively in terms of the dispersion characteristics of the results. SOURCE: ISO 3534-2:2006, 3.3.5, modified Cross-references have been deleted. 3.3 reproducibility precision under reproducibility conditions Note 1 to entry: Repr

46、oducibility can be expressed quantitatively in terms of the dispersion characteristics of the results. Note 2 to entry: Results are usually understood to be corrected results. SOURCE: ISO 3534-2:2006, 3.3.10, modified Cross-references have been deleted. 3.4 round robin testing RRT ring testing proce

47、ss in which one or more items is tested according to a specific protocol by a number of different laboratories Note 1 to entry: It is the intention to derive levels of repeatability and reproducibility and hence to make classifications of laboratories. Note 2 to entry: The term “proficiency testing”

48、, defined in ISO/IEC 17043:2010, 3.7, is more general, as it covers aspects other than derivation of repeatability and reproducibility. Note 3 to entry: Round robin testing may be used for the evaluation of laboratory performance against pre- established criteria. 4 Process and responsibilities 4.1

49、Process 4.1.1 Product to be tested The product category to be tested should be clearly specified and one or more representative products should be selected. If only one product is selected, it should be representative in the sense that it reflects the typical behaviour and performance of the defined product category. It is recommended that two or more products be tested in order to get an indication of the measurement uncertainty across the range of performance that is likely to be encountered in th