IEC 62379-1-2007 Common control interface for networked digital audio and video products - Part 1 General《网络化数字音频和视频产品用通用控制接口.第1部分 总则》.pdf

《IEC 62379-1-2007 Common control interface for networked digital audio and video products - Part 1 General《网络化数字音频和视频产品用通用控制接口.第1部分 总则》.pdf》由会员分享，可在线阅读，更多相关《IEC 62379-1-2007 Common control interface for networked digital audio and video products - Part 1 General《网络化数字音频和视频产品用通用控制接口.第1部分 总则》.pdf（146页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62379-1 Edition 1.0 2007-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Common control interface for networked digital audio and video products Part 1: General Interface de commande commune pour produits audio et vido numriques connects en rseaux Partie 1: Gnralits IEC 62379-1:2007 colour insid

2、e THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission

3、 in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for furt

4、her information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Com

5、it national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +4

6、1 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and relate

7、d technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advan

8、ced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Pu

9、blished details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms

10、in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la

11、 CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CE

12、I est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (n

13、umro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Dis

14、ponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additi

15、onnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62379-1 Edition 1.0 2007-08 INTERNATIONAL STANDARD

16、 NORME INTERNATIONALE Common control interface for networked digital audio and video products Part 1: General Interface de commande commune pour produits audio et vido numriques connects en rseaux Partie 1: Gnralits INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE

17、 XB ICS 33.160; 35.100 PRICE CODE CODE PRIX ISBN 978-2-83220-239-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veui

18、llez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 62379-1 IEC:2007 CONTENTS FOREWORD . 4 0 Introduction 6 0.1 Overview . 6 0.2 Structure of the family of standards . 6 0.3 Model of the equipment being controlled . 7 0.3.1 Blocks . 7 0.3.2 Control frame

19、work . 8 0.3.3 How the framework helps when designing units . 9 0.3.4 How the framework enables “plug and play“ 9 0.3.5 Defining a new type of block 9 0.4 Management information base (MIB) . 10 0.4.1 Objects 10 0.4.2 Other uses of OIDs 10 0.4.3 Migration to XML . 10 0.5 Status broadcasts . 11 0.5.1

20、Introduction . 11 0.5.2 Status page information sources 11 0.5.3 Status page general format 11 0.6 Calls 11 0.7 Privilege levels 12 0.8 Automation 13 0.9 Uploading software 13 0.10 Encapsulation of messages . 14 0.11 Further information 14 1 Scope . 15 2 Normative references . 15 3 Terms and definit

21、ions . 15 4 Unit management . 18 4.1 Protocol . 18 4.2 MIB definitions 19 4.2.1 General . 19 4.2.2 Application-wide type definitions 20 4.2.3 Conceptual row type definitions . 24 4.2.4 MIB objects for basic unit identity and status information . 25 4.2.5 MIB objects for the block framework 28 4.2.6

22、MIB objects for real time clock information. 30 4.2.7 MIB objects for reference clock information . 31 4.2.8 MIB objects for software upload . 32 4.2.9 MIB objects for scheduled operations 34 5 Procedures . 36 5.1 Real-time clocks 36 5.2 Procedures for uploading software 36 5.2.1 Areas. 36 5.2.2 Con

23、tents 37 5.2.3 Procedure for updating a software component . 37 62379-1 IEC:2007 3 5.2.4 File format for a software component . 38 5.2.5 Format for product files . 39 5.2.6 Software distribution 40 5.3 Scheduled operations 40 5.3.1 Requesting a scheduled operation . 40 5.3.2 Executing a scheduled op

24、eration . 42 5.3.3 Delaying a scheduled operation . 42 5.3.4 Aborting a scheduled operation . 42 5.3.5 State of relative operations 42 6 Status broadcasts . 42 6.1 General . 42 6.2 Page formats . 44 6.2.1 Basic unit identity page . 44 6.2.2 Time-of-day page 44 6.2.3 Scheduled operations page . 45 6.

25、3 Page groups 45 6.3.1 basicUnitStatus . 45 6.3.2 timeOfDay . 45 6.3.3 scheduledOps . 45 Annex A (informative) Background information . 47 Annex B (informative) Machine-readable MIB definitions 50 Annex C (informative) Machine-readable status page-group definitions . 68 Bibliography 69 Figure 1 A bl

26、ock . 7 Figure 2 Ports 7 Figure 3 Example of a “unit“ . 8 Table 1 Managed objects conveying information about the unit 25 Table 2 Managed objects for block and connector configuration . 28 Table 3 Managed objects for real-time clock information 30 Table 4 Managed objects for reference clock informat

27、ion . 31 Table 5 Managed objects for software upload 32 Table 6 Managed objects for scheduled operations 34 4 62379-1 IEC:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMMON CONTROL INTERFACE FOR NETWORKED DIGITAL AUDIO AND VIDEO PRODUCTS Part 1: General FOREWORD 1) The International Electrotech

28、nical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To thi

29、s end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National

30、Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)

31、in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from

32、 all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be hel

33、d responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any di

34、vergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publicatio

35、n. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property

36、damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this

37、publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or a

38、ll such patent rights. International Standard IEC 62379-1 has been prepared by IEC technical committee 100: Audio, video and multimedia systems and equipment. This bilingual version (2012-08) corresponds to the monolingual English version, published in 2007-08. The text of this standard is based on

39、the following documents: FDIS Report on voting 100/1248/FDIS 100/1281/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted

40、 in accordance with the ISO/IEC Directives, Part 2. 62379-1 IEC:2007 5 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication.

41、At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users sh

42、ould therefore print this document using a colour printer. 6 62379-1 IEC:2007 0 Introduction 0.1 Overview This family of standards specifies a control framework for networked audiovisual equipment. It provides a means for management entities to control not only transmission across the network but al

43、so other functions within interface equipment. Although it was originally developed for audio over asynchronous transfer mode (ATM) in radio broadcasting, the control framework has been extended to encompass video and other time-critical media, as well as other networking technologies and other appl

44、ications in both professional and consumer environments. The control framework provides a number of key features: it provides a consistent interface to the functionality in an audiovisual unit; it enables systems to be built that are truly “plug and play“, by providing the means for equipment to dis

45、cover what units are connected to the network and what their capabilities are; it links discrete areas or blocks of functionality together in a consistent and structured way; it allows us to define small focused building blocks from which more complex functionality can be built; it ensures new funct

46、ionality can be developed and integrated consistently and easily into the framework. The functionality provided by an audiovisual unit is represented using one or more “blocks“ (such as a cross-point switch or a gain control), structured and connected together using the control framework. As a furth

47、er aid to the “plug-and-play“ functionality, a common format for audio and video being conveyed across the network is also specified, to avoid situations in which two pieces of equipment fail to communicate because there is no format which both support. Equipment may, of course, also support other f

48、ormats appropriate to particular applications, and the standard mechanisms for initiating and terminating communication will work for those formats in the same way as for the standard formats. 0.2 Structure of the family of standards IEC 62379 is intended to include the following parts: Part 1: Gene

49、ral Part 2: Audio Part 3: Video Part 4: Data Part 5: Transmission over networks Part 6: Packet transfer service Part 1 specifies aspects which are common to all equipment. Parts 2 to 4 specify control of internal functions specific to equipment carrying particular types of media; in the case of Part 4, this would be time-critical media other than audio and video, for instance, RS232 and RS422 data for applicati