UL 61010-2-012-2017 UL Standard for Safety Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-012 Particular Requirements for Climaticur.pdf

《UL 61010-2-012-2017 UL Standard for Safety Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-012 Particular Requirements for Climaticur.pdf》由会员分享，可在线阅读，更多相关《UL 61010-2-012-2017 UL Standard for Safety Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-012 Particular Requirements for Climaticur.pdf（105页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 61010-2-012 (IEC 61010-2- 012:2016) Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-012: Particular Requirements for Climatic and Environmenta

2、l Testing and Other Temperature Conditioning Equipment STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard f

3、or Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment, UL 61010-2-012 (IEC 61010-2-012:2016) First Edition, Dated February 20, 2017 Summary of

4、 Topics Adoption of IEC 61010-2-012, Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment (rst edition issued July 2016) as a new IEC-based UL s

5、tandard, UL 61010-2-012 (IEC 61010-2-012:2016), with no National Differences. The new requirements are substantially in accordance with Proposal(s) on this subject dated November 25, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitte

6、d in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any

7、 purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative ha

8、s been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and a

9、gainst any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. FEBRUARY 20, 2017 UL 61010-2-012 (IEC 61010-2-012:2016) tr1UL CO

10、PYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 20, 2017 UL 61010-2-012 (IEC 61010-2-012:2016) tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 20

11、, 2017 1 UL 61010-2-012 (IEC 61010-2-012:2016) Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment First Edition February 20, 2017

12、 This ANSI/UL Standard for Safety consists of the First Edition dated February 20, 2017. The most recent designation of ANSI/UL 61010-2-012 (IEC 61010-2-012:2016) as an American National Standard (ANSI) occurred on February 20, 2017. ANSI approval for a standard does not include the Cover Page, Tran

13、smittal Pages, Title Page, or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal R

14、equest in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standa

15、rds shall remain the sole and exclusive property of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 61010-2-012-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 20, 2017 UL 61010-2-012 (IEC 61010-2-012:2016) 2 No Text o

16、n This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 FOREWORD 7 INTRODUCTION . 10 1 Scope and object .13 1.2 Object .14 2 Normative references .14 3 Terms and denitions 15 3.1 Equipment and states of equipment .15 3.

17、2 Parts and accessories .16 3.5 Safety terms 19 4 Tests .21 4.3 Reference test conditions 21 5 Marking and documentation .28 5.1 Marking 28 5.2 Warning markings .32 6 Protection against electric shock .40 7 Protection against mechanical HAZARDS 43 7.4 Stability 43 7.5 Lifting devices and supporting

18、parts .44 8 Resistance to mechanical stresses .44 8.1 General 44 9 Protection against the spread of re 45 9.5 Requirements for equipment containing or using FLAMMABLE LIQUIDS .46 10 Equipment temperature limits and resistance to heat 47 10.1 Surface temperature limits for protection against burns an

19、d frostbite 47 10.2 Temperatures of windings .48 10.4 Conduct of temperature tests 49 10.101 Overtemperature protection .50 10.102 Restarting after interruption of cooling and/or heating .51 11 Protection against HAZARDS from uids .51 11.1 General .51 11.3 Spillage .52 11.4 Overow and low level 52 1

20、2 Protection against radiation, including laser sources, and against sonic and ultrasonic pressure .68 12.1 General .68 12.3 Optical radiation 69 13 Protection against liberated gases and substances, explosion and implosion .70 13.1 Poisonous and injurious gases and substances 70 13.101 Biohazardous

21、 substances .71 13.102 Warning requirements related to chemical HAZARD 72 14 Components and subassemblies .72 14.3 Overtemperature protection devices 72 14.101 Components and subassemblies for REFRIGERATING SYSTEMS .73 14.102 Flexible tubing and hose subjected to liquid pressure other than REFRIGERA

22、NT 74 15 Protection by interlocks 74 15.1 General .74 FEBRUARY 20, 2017 UL 61010-2-012 (IEC 61010-2-012:2016) 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 15.101 Mechanism of door and/or lock for WALK-IN EQUIPMENT 74 15.102 Interlock bet

23、ween CIRCULATING PUMP, agitator and, heating, cooling, MECHANICAL MOVEMENT and/or operation of APPLICATION SYSTEM .75 15.103 Interlock between CIRCULATING FAN, door or lid and, heating, cooling and/or radiation, humidifying and MECHANICAL MOVEMENT 76 15.104 Interlock between salt spray and cover of

24、salt spray corrosion TEST CHAMBER .77 16 HAZARDS resulting from application .77 16.1 REASONABLY FORESEEABLE MISUSE .77 16.101 Slip HAZARD 77 17 RISK assessment 78 Annex Annex K (normative) Insulation requirements not covered by 6.7 K.1.3 Solid insulation for MAINS CIRCUITS .80 Annex L (informative)

25、Index of dened terms Annex AA (informative) Useful symbols Annex BB (informative) Protection for people who are inside WALK-IN EQUIPMENT BB.1 General .86 BB.2 Emergency switch or signal 86 BB.3 WALK-IN EQUIPMENT with a controlled atmosphere .86 Annex CC (informative) Safety requirements for componen

26、ts and piping CC.1 Overview 88 CC.2 Components and subassemblies requirements for switches and controls used in REFRIGERATING SYSTEM for North America 91 Annex DD (informative) Equipment containing FLAMMABLE REFRIGERANTS information and marking requirements DD.1 Marking, installation and operating i

27、nstructions (SB6) .93 DD.1.1 Marking .93 DD.1.2 OPERATOR markings .93 DD.1.3 Service markings 93 DD.1.4 Disposal 94 DD.1.5 Exposed tubing 94 DD.1.6 Accessing the REFRIGERANT circuit .94 DD.1.7 Symbol for warning of ammable materials 94 DD.1.8 Equipment containing a remote CONDENSING UNIT 94 DD.1.9 R

28、efrigerating equipment intended for laboratory use 95 FEBRUARY 20, 2017 UL 61010-2-012 (IEC 61010-2-012:2016) 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL DD.2 Installation and operating instructions .95 DD.2.1 Handling and moving .95 DD

29、.2.2 Packaging markings 95 DD.2.3 Replacement components and servicing 95 DD.2.4 Installation instructions for equipment containing a remote CONDENSING UNIT 95 Annex EE (normative) Non-sparking “n” electrical device 11 Supplementary requirements for non-sparking luminaires 96 19 Supplementary requir

30、ements for sealed devices or encapsulated devices producing arcs, sparks or hot surfaces .96 19.1 Non-metallic materials 96 19.6 Type tests .96 20 Supplementary requirements for restricted-breathing enclosures protecting apparatus producing arcs, sparks or hot surfaces .96 Bibliography FEBRUARY 20,

31、2017 UL 61010-2-012 (IEC 61010-2-012:2016) 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This UL Standard is based on IEC Publication 61010-2-012: rst edition, Safety Requirements for Electrical Equipment for Measurement, Control

32、and Laboratory Use Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment. IEC publication 61010-2-012 is copyrighted by the IEC. This UL Standard 61010-2-012 Standard for Safety Requirements for Electrical Equipment for Measurement, C

33、ontrol and Laboratory Use Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment, is to be used in conjunction with the third edition of UL 61010-1. The requirements for control equipment are contained in this Part 2 Standard and UL 61

34、010-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 61010-1. Where a particular subclause of UL 61010-1 is not mentioned in UL 61010-2-012, the UL 61010-1 subclause applies. The text, gures and tables of IEC Publication Safety Requirements for Electrical Equipment

35、 for Measurement, Control and Laboratory Use Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment, IEC 61010-2-012, copyright July 2016, are used in this Standard with the consent of the IEC and the American National Standards Instit

36、ute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purpo

37、ses only. Copies of IEC Publication 61010-2-012 may be purchased from ANSI, 11 West 42nd Street, New York, New York, 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users

38、of the Standard to judge its suitability for their particular purpose. FEBRUARY 20, 2017 UL 61010-2-012 (IEC 61010-2-012:2016) 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION SAFETY REQUIREMENTS FOR

39、 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization co

40、mprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic elds. To this end and in addition to other activities, IEC publishes International Stan

41、dards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparat

42、ory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizatio

43、ns. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of rec

44、ommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by

45、any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional p

46、ublication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certication bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by indep

47、endent certication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any pe

48、rsonal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative r

49、eferences cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61010-2-012 has been prepared by IEC technical committee 66: Safety of measuring, control and laboratory equipment. FEBRUARY 20, 2017 UL 61010-