SAE AS 95234 2-2014 CONNECTOR RECEPTACLE SQUARE FLANGE REVERSE BAYONET COUPLING BOX MOUNT FRONT NO ACCESSORY THREAD《无装饰线的前部箱安装反卡口连接 方形法兰插座连接器》.pdf

《SAE AS 95234 2-2014 CONNECTOR RECEPTACLE SQUARE FLANGE REVERSE BAYONET COUPLING BOX MOUNT FRONT NO ACCESSORY THREAD《无装饰线的前部箱安装反卡口连接 方形法兰插座连接器》.pdf》由会员分享，可在线阅读，更多相关《SAE AS 95234 2-2014 CONNECTOR RECEPTACLE SQUARE FLANGE REVERSE BAYONET COUPLING BOX MOUNT FRONT NO ACCESSORY THREAD《无装饰线的前部箱安装反卡口连接 方形法兰插座连接器》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 AEROSPACE STANDARD CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD AS95234/2Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any m

2、eans, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org

3、 ISSUED 2014-01THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5970 AS95234/2 SHEET 1 OF 2 PROCUREMENT SPECIFICATION: AS95234SAE Technical Standards Board Rules provide that: “This report ispublished by SAE toadvance thestate of technicalandengineering sciences. Theuse ofthisrepor

4、t is entirelyvoluntary, andits applicability and suitability forany particularuse,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcancelled. SAE

5、invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS95234/2 RATIONALE THIS DETAIL SPECIFICATION SHEET IS REQUIRED TO STANDARDIZE COMMERCIAL CONNECTORS FOR USER APPLICATIONS. NOTICE THE CO

6、MPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS95234. FIGURE 1 - CONNECTOR RECEPTACLE AEROSPACE STANDARD AS95234/2 SHEET 2 OF 2 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THRE

7、AD TABLE 1 - FIGURE 1 DIMENSIONS SHELL SIZE FRONT VIEW SIDE VIEW R .004 (0.1) S .012 (0.3) T1 +.004/-.000 (+0.1/-0.0) A +.000/-.006 (+0.00/-0.15) K .008 (0.2) L .012 (0.3) M +.016/-.000 (+0.4/-0.00 N MAX. 10SL .717 (18.2) 1.000 (25.4) .126 (3.2) .717 (18.2) .110 (2.8) 1.087 (27.6) .559 (14.2) .638 (

8、16.2) 14S .906 (23.0) 1.181 (30.0) .126 (3.2) .969 (24.6) .126 (3.2) 1.087 (27.6) .559 (14.2) .756 (19.2) 16S .969 (24.6) 1.280 (32.5) .126 (3.2) 1.079 (27.4) .126 (3.2) 1.087 (27.6) .559 (14.2) .882 (22.4) 16 .969 (24.6) 1.280 (32.5) .126 (3.2) 1.079 (27.4) .126 (3.2) 1.331 (33.8) .748 (19.0) .882

9、(22.4) 18 1.063 (27.0) 1.378 (35.0) .126 (3.2) 1.213 (30.8) .157 (4.0) 1.331 (33.8) .748 (19.0) 1.008 (25.6) 20 1.157 (29.4) 1.496 (38.0) .126 (3.2) 1.346 (34.2) .157 (4.0) 1.331 (33.8) .748 (19.0) 1.142 (29.0) 22 1.252 (31.8) 1.614 (41.0) .126 (3.2) 1.472 (37.4) .157 (4.0) 1.331 (33.8) .748 (19.0)

10、1.268 (32.2) 24 1.374 (34.9) 1.752 (44.5) .146 (3.7) 1.610 (40.9) .157 (4.0) 1.409 (35.8) .811 (20.6) 1.390 (35.3) 28 1.563 (39.7) 2.000 (50.8) .146 (3.7) 1.839 (46.7) .157 (4.0) 1.409 (35.8) .811 (20.6) 1.630 (41.4) 32 1.752 (44.5) 2.244 (57.0) .169 (4.3) 2.102 (53.4) .157 (4.0) 1.469 (37.3) .874 (

11、22.2) 1.882 (47.8) 36 1.937 (49.2) 2.500 (63.5) .169 (4.3) 2.346 (59.6) .157 (4.0) 1.469 (37.3) .874 (22.2) 2.130 (54.1) REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS95234. 1. DESIGN: CONNECTORS SHALL BE DESIGNED IN ACCORDANCE WTH FIGURE 1 AND TABLE 1. DIME

12、NSIONS ARE IN INCHES. METRIC EQUIVALENTS ARE GIVEN FOR INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MM. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. 2. FOR INSERT ARRANGEMENTS, SEE AS95234, APPENDIX B. 3. PART NUMBER: THE PART NUMBER SHALL BE AS SHOWN IN THE EXAMPLE BELOW: SPECIFICATIO

13、N NOTES: 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.