SAE AMS 3669G-2012 Polytetrafluoroethylene (PTFE) Sheet Molded Premium Grade As Sintered《烧结的优质浇铸聚四氟乙烯(PTFE)板材》.pdf

《SAE AMS 3669G-2012 Polytetrafluoroethylene (PTFE) Sheet Molded Premium Grade As Sintered《烧结的优质浇铸聚四氟乙烯(PTFE)板材》.pdf》由会员分享，可在线阅读，更多相关《SAE AMS 3669G-2012 Polytetrafluoroethylene (PTFE) Sheet Molded Premium Grade As Sintered《烧结的优质浇铸聚四氟乙烯(PTFE)板材》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there

2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m

3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U

4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS3669GAEROSPACEMATERIALSPECIFICATIONAMS3669 REV. G Issued 1969-05 Reaffirmed 1998-12 Revise

5、d 2010-06Stabilized 2012-02 Superseding AMS3669F Polytetrafluoroethylene (PTFE) Sheet, Molded Premium Grade, As Sintered RATIONALE This document has been determined to contain basic and stable technology which is not dynamic in nature. STABILIZED NOTICE This document has been declared “Stabilized“ b

6、y SAE AMS P, Polymeric Materials Committee, and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability of technical requirements. Newer technology may exist. Copyright SAE International Provided by IHS under license with

7、 SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS3669G Page 1 of 6 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS3669G Page 2 of 6 Copyright SAE

8、International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS3669G Page 3 of 6 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from

9、 IHS-,-,-SAE AMS3669G Page 4 of 6 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS3669G Page 5 of 6 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS3669G Page 6 of 6 STABILIZED BY AMS COMMITTEE “P“ Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-