NAVY FED-STD-131 C-1968 DIAZOTYPE PAPER SHEET AND ROLL SIZES《重氮纸纸页和轧辊尺寸》.pdf

《NAVY FED-STD-131 C-1968 DIAZOTYPE PAPER SHEET AND ROLL SIZES《重氮纸纸页和轧辊尺寸》.pdf》由会员分享，可在线阅读，更多相关《NAVY FED-STD-131 C-1968 DIAZOTYPE PAPER SHEET AND ROLL SIZES《重氮纸纸页和轧辊尺寸》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、- Fed. Std. No. 13ic March 29. 1968 (UU-P-22i, Issue in Effect) SUPEXSEDING Fed. Std. No. l3lb May 5, 1966 FFBEEtAJ-, STANDARD DIAZOTYPE. PAPER SHEET SIZES Authority. This standard is issued pursuant to the Federal Property and Administrative Services Act of 1949, as amended, and its application to

2、the purchase of commodities referred to herein is mandatory on all Federal agencies. S1. Purpose and scope. This standard establishes seventeen sheet sizes of diazo paper for the use of all Federal agencies to achieve the optimum degree of standardization. S2. Application. Purchases from commercial

3、sources under Federal Specification UU-P-221, of the issues in effect on date of invitation for bids, shall be limited to items which have characteristics conforming to this standard. characteristics shall continue to be utilized until exhausted. In those cases where this Federal Standard eliminates

4、 supply items and the items so eliminated are under contract, if the contract cannot be negotiated or amended to conform to the standard item, the Federal Standard becomes mandatory at the contract expiration date. Existing Government stocks of items with other S3. Dimensions. Diazotype paper purcha

5、sed for use by Federal agencies shall be limited to the following sizes: Diazotype paper, sheet sizes, 8 by 10-1/2 8-1/2 by 11 8-1/2 by 14 9 by 12 11 by 17 12 by 18 17 by 22 20 by 28 18 by 24 21 by 30 22 by 32 22 by 34 23 by 25 24 by 30 24 by 36 28 by 40 30 by 42 S4. Changes. When a Federal agency c

6、onsiders that this standard does not provide for its This justification shall explain wherein essential needs, written request for changing or adding to the standard, supported by adequate justification, shall be sent to the Administration. the standard does not provide for essential needs. General

7、Services Administration, Federal Supply Service, Standardization.Division, Washington, D. C. 20405. agency. S5. Conflict with referenced specifications. conflict with any requirement in a referenced specification, the requirements of the standard shall apply. Nature of conflict between the standard

8、and the referenced specification shall be submitted in duplicate to the General Services Administration, Federal Supply Service, Standardization Division, bJashington, D. C. 20405. The request shall be sent in duplicate to the The Administration will determine the appropriate action to be taken and

9、will notify the Vihere the requirements stated in this standard / z- . FSC 6750 THIS DOCUMENT CONTAINS 2 PAGES. - z- Y Y- i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-