GSA A-A-3113-1997 CHAIRS ROTARY STEEL TUBULAR SPECIAL PURPOSE [Superseded GSA AA-C-00295 A CANC NOTICE GSA AA-C-295 CANC NOTICE GSA AA-C-00295 A (2) GSA AA-C-00295 A (1) GSA AA-C-0T A.pdf

《GSA A-A-3113-1997 CHAIRS ROTARY STEEL TUBULAR SPECIAL PURPOSE [Superseded GSA AA-C-00295 A CANC NOTICE GSA AA-C-295 CANC NOTICE GSA AA-C-00295 A (2) GSA AA-C-00295 A (1) GSA AA-C-0T A.pdf》由会员分享，可在线阅读，更多相关《GSA A-A-3113-1997 CHAIRS ROTARY STEEL TUBULAR SPECIAL PURPOSE [Superseded GSA AA-C-00295 A CANC NOTICE GSA AA-C-295 CANC NOTICE GSA AA-C-00295 A (2) GSA AA-C-00295 A (1) GSA AA-C-0T A.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、m 9038054 0006011 T7 m INCH-POUND A-A-3 1 13 . Januarv 6. 1997 SUPER!3EDIN August 5, I955 AA-C-295 COWRCAL EM DESCRTPTION CHAIRS, ROTARY, S7EEL, TUBULAR, SPECIAL PURPOSE The General SeMces Administration has authorized the use of this commercial item description, for di fderal agencies. a. his comme

2、rcial itern description covers tubular steel, rotary, armless chairs that are intendcd for groups of typists, telephone, or mache operators, draftsmm and for similar personnel or areas where SQ degree of posture is requid, but where it ir not ncctssary to match other items of standard equipment. The

3、 class 1, size 1 chair is a fully adjustable posture chair. Classification. Ch and size. nic chairs shall be afthe following ciasses and sk. Class i - Non-tilting sea$ tilting adjustable back. Class 2 - Nm-tiiting, scat, non-tilting adjustable backs. Size i - Standard base. Size I - Standard he. Siz

4、e 2 - intermediate base. sizt 3 -High base. Color of finish. The color ofthe chairs shall be gray, Color No. 26134 of Federal Standard Number 595. In adcton, the manufacarers may ofJ SeMces Abninidon, FM Supply Ssrvie, Natiorial Furniture Centcr (3FNE-CO), Washingion, DC 20406. FSC 7 1 O5 Licensed b

5、y Information Handling Servicesm 5038054 OOObOL2 833 M I commercial. practice. -. The derails of construction including desips, joining, assembly, filling shaii bc: in accordance with the manufactureis best quality and comercial practice. hy of the above details which are not specified or shown in r

6、ht figures shdl be in accordance wirh first class. commercial, metal chair practice. Finished chairs shall be neat and free tiom any defecrs that affect the appearance or which might affect the serviceability of the chairs or the safety of the user. Test Rea- . The chairs shaii be tested as follows.

7、 The ctiairs shall be tested in accordame With applicable rtqukment of .WSI/BIFMA X5.1- 1993. California Technical Bulletin 1 17 tests shall be performed on ail chairs or on a representative chak provided that the components axe identical to the tested chair Unless othewisc specified in the contract

8、 or purchase order, he manufacnuedconuactor is responsible for tbe performance of alt inspection requirements specified herein. Sampling for inspection shall be performed in accordance with AVSYASQC Z1.5, Unless the contracting ofictr or hidher representative approves an equal or better plan. A loi

9、shall consics of chairs of one size and color. A mple shall be one tach. Inspection levels and AQLs shall be as foliows: $ For fit, finish and all other workmanship - Levei II, AQL 4.0 defects per hundred Any failure CO meet the Federal Standard color number 26133 in accordance with Federal Standard

10、 595, identification label or performance requirements shall cause rejection of the lot. -. Chairs shall be ,coated with enamel, powder base or the manufacturers best commercial coating. The finish shall Level out to produce smooth uniform surfaces rviirhout runs, Wrinkles, grit, or areas of thin fi

11、lm. Marbg. The marking shall be in accordance with tbe manufacturers standard comercial practice. In addition, a iabel shall be affixed to the underside of the chairs and include the manufacturers name or trademark, contract number, National Stock Number (if specified), and month and year manufactur

12、ed. delivsry. Presewation and packhg shall be in accordance with the manufacturers best commercial practice. Swivel-row chairs shall be packed one per shipping container, with casters removed and packaged in the sme container. U. Marking of the shqping containers shall be as specified in the purchas

13、e order or if not specified, in accordance With the manufacturers standard markings. 2 Licensed by Information Handling Servicesm 9018054 0006013 77T m- I iatorv Ream. The oiTeror/conaactot is cncauraged to use recovered materials in accordance with Pubiic Law 94-580 to the maximum extent practicable. Notes. Oow. kchasers should spec- _ . -F- i- cf - :I 1 5EATAREA !I 7 Licensed by Information Handling Services