FORD FLTM BN 112-09-2006 TEST METHOD FOR SUSCEPTIBILITY OF TRIM MATERIALS TO DYE INGRESS (North America Only)《内饰材料对染料侵入的敏感性的试验方法 仅适用于北美地区》.pdf

《FORD FLTM BN 112-09-2006 TEST METHOD FOR SUSCEPTIBILITY OF TRIM MATERIALS TO DYE INGRESS (North America Only)《内饰材料对染料侵入的敏感性的试验方法 仅适用于北美地区》.pdf》由会员分享，可在线阅读，更多相关《FORD FLTM BN 112-09-2006 TEST METHOD FOR SUSCEPTIBILITY OF TRIM MATERIALS TO DYE INGRESS (North America Only)《内饰材料对染料侵入的敏感性的试验方法 仅适用于北美地区》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 FORD LABORATORY TEST METHODBN 112-09Date Action Revisions 2006 12 11 Acitvated C. Leslie Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 TEST METHOD FOR SUSCEPTIBILITY OF TRIM MATERIALS TO DYE INGRESS (North America Only) Application This method is used to

2、determine the susceptibility of dye ingress onto trim material in terms of a Gray Scale rating as determined by AATCC Evaluation Procedure 1 and is applicable to all trim material applications. This method was originally released as JNS 30.14.30. Apparatus Required Electrically Driven Crockmeter (re

3、f FLTM BN 107- 01 or BS 3424 part 14) The Crockmeter has a cylindrical acrylic finger 16 mm diameter, which has a flat, smooth end and the edges are slightly rounded to prevent abrading. The cylindrical finger shall exert a force on 9 N on the test material and shall have a stroke of approximately 1

4、00 mm. Source: SDLATLAS Wentworth Instruments Ltd. 1813A Associates Lane North Green, Dachet Charlotte, NC 28217-2956 U.S.A. Slough, SL3 9JH England Or Firma Walter Thoma SDLATLAS 7888 Rheinfelden/Baden P.O. Box 162, Crown Royal Wehrstrabe 6, Germany Shawcross St. Stockport, SK1 3JW England AATCC- G

5、ray Scale Evaluation (latest edition), Procedure 1 Source: American Association of Textile Chemists and Colorists P.O. Box 12215 Research Triangle Park Durham, North Carolina 27709 U.S.A. AATCC Crockmeter Cloth (style 3) 80 x 84 thread count, combed cotton, desized, bleached (no optical brightener o

6、r finishing material present) Source: Testfabrics, Inc. P.O. Box 26 415 Delaware Ave. West Pittston, PA 18643, USA Phone: (570) 603-0432 Fax: (570) 603-0433 FORD LABORATORY TEST METHODBN 112-09Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 Denim Fabric, 146

7、4 Indigo 1655 or equivalent Source : Testfabrics, Inc. P.O. Box 26 415 Delaware Ave. West Pittston, PA 18643, USA Phone: (570) 603-0432 Fax: (570) 603-0433 http:/ Solutions Required Alkaline Perspiration Solution (Ref FLTM BI 113-06 or BS 1006 E04) Cleaning Agents Jaguar Leather Cleaner or Ford Delu

8、xe Leather and Vinyl Cleaner (ZC-11-A/B/C) Conditioning and Test Conditions All test values indicated herein are based on material conditioned in a controlled atmosphere of 23+/-2 C and 50 +/- 5% relative humidity for not less than 24 h prior to testing and tested under the same conditions unless ot

9、herwise specified. Procedure/Evaluation/Reporting 1. Place the trim material sample on to the base of the crockmeter. 2. Immerse the denim cloth in alkaline perspiration solution, remove any excess liquid and attach it to the crockmeter finger (low finger). 3. Commence and run the crockmeter for 200

10、 complete cycles. 4. Remove the tested trim material form the crockmeter and assess and record the degree of dye ingress into the tested trim material using the standard (BS 1006 A03 or per ISO 105-A02/AATCC Gray Scale Evaluation Procedure 1). . 5. Soak a crockmeter cloth in one of the cleaners and

11、remove excess liquid. Attach it to the crockmeter finger and run 10 cycles on the area stained in steps 1 through 4 above. 6. Assess and record the degree of cleaning using the standard (BS 1006 A03 or per ISO 105-A02/AATCC Gray Scale Evaluation Procedure 1). Chemicals, materials, parts and equipment referenced in this document must be used and handled properly. Each party is responsible for determining proper use and handling in its facilities.