ETSI TS 126 204-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Speech codec speech processing functions Adap.pdf

《ETSI TS 126 204-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Speech codec speech processing functions Adap.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 126 204-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Speech codec speech processing functions Adap.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 126 204 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Speech codec speech processing functions; Adaptive Multi-Rate - Wideband (AMR-WB) speech codec; ANSI-C code (3GPP TS 26.204 version 15.0.0 Release 1

2、5) TECHNICAL SPECIFICATION ETSI ETSI TS 126 204 V15.0.0 (2018-07)13GPP TS 26.204 version 15.0.0 Release 15Reference RTS/TSGS-0426204vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017

3、- NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any elect

4、ronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF

5、) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliver

6、ableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including

7、 photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLU

8、GTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo a

9、re trademarks registered and owned by the GSM Association. ETSI ETSI TS 126 204 V15.0.0 (2018-07)23GPP TS 26.204 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information p

10、ertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Sec

11、retariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates

12、 on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as bein

13、g the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specificati

14、on (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. T

15、he cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as

16、described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 126 204 V15.0.0 (2018-07)33GPP TS 26.204 version 15.0.0 Release 15Contents Intellectual Pro

17、perty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 C code structure 6g34.1 Contents of the C source code 6g34.2 Program execution 6g34.3 Code hierarchy . 7g34.4 Variables,

18、constants and tables . 11g34.4.1 Description of fixed tables used in the C-code . 11g34.4.2 Static variables used in the C-code . 13g35 Homing procedure 15g36 File formats 16g36.1 Speech file (encoder input/decoder output) 16g36.2 Mode control file (encoder input) . 16g36.3 Parameter bitstream file

19、(encoder output/decoder input) . 16g3Annex A (informative): Change history . 17g3History 18g3ETSI ETSI TS 126 204 V15.0.0 (2018-07)43GPP TS 26.204 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of th

20、e present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Versio

21、n x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the thir

22、d digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 126 204 V15.0.0 (2018-07)53GPP TS 26.204 version 15.0.0 Release 151 Scope The present document contains an electronic copy of the ANSI-C code for the Floating-point Adaptive Multi-Rate Wideband co

23、dec. This floating-point codec specification is mainly targeted to be used in multimedia applications or in packet-based applications. The bit-exact fixed-point ANSI-C code in 3GPP TS 26.173 remains the preferred implementation for all applications, but the floating-point codec may be used instead o

24、f the fixed-point codec when the implementation platform is better suited for a floating-point implementation. It has been verified that the fixed-point and floating-point codecs interoperate with each other without any artifacts. The floating-point ANSI-C code in the present document is the only st

25、andard conforming non-bit-exact implementation of the Adaptive Multi-Rate Wideband speech transcoder (3GPP TS 26.190 2), Voice Activity Detection (3GPP TS 26.194 6), comfort noise generation (3GPP TS 26.192 4), and source controlled rate operation (3GPP TS 26.193 5). The floating-point code also con

26、tains example solutions for substituting and muting of lost frames (3GPP TS 26.191 3). The fixed-point specification in 26.173 shall remain the only allowed implementation for the 3G AMR-WB speech service and the use of the floating-point codec is strictly limited to other services. The floating-poi

27、nt encoder in the present document is a non-bit-exact implementation of the fixed-point encoder producing quality indistinguishable from that of the fixed-point encoder. The decoder in the present document is functionally a bit-exact implementation of the fixed-point decoder, but the code has been o

28、ptimized for speed and the standard fixed-point libraries are not used as such. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition n

29、umber, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest

30、version of that document in the same Release as the present document. 1 3GPP TS 26.174: “AMR speech codec, wideband; Test sequences“. 2 3GPP TS 26.190: “Mandatory Speech Codec speech processing functions AMR Wideband speech codec; Transcoding functions“. 3 3GPP TS 26.191: “AMR speech codec, wideband

31、; Error concealment of lost frames“. 4 3GPP TS 26.192: “Mandatory Speech Codec speech processing functions AMR Wideband Speech Codec; Comfort noise aspects“. 5 3GPP TS 26.193: “AMR speech codec, wideband; Source controlled rate operation“. 6 3GPP TS 26.194: “Mandatory Speech Codec speech processing

32、functions AMR Wideband speech codec; Voice Activity Detector (VAD)“. 7 RFC 3267 “A Real-Time Transport Protocol (RTP) Payload Format and File Storage Format for Adaptive Multi-Rate (AMR) and Adaptive Multi-Rate Wideband (AMR-WB) Audio Codecs“, June 2002. ETSI ETSI TS 126 204 V15.0.0 (2018-07)63GPP T

33、S 26.204 version 15.0.0 Release 153 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 26.190 2, TS 26.191 3, TS 26.192 4, TS 26.193 5 and TS 26.194 6. 3.2 Abbreviations For the purposes of the present document, the following

34、 abbreviations apply: AMR-WB Adaptive Multi-Rate WideBand ANSI American National Standards Institute GSM Global System for Mobile communications I/O Input/OutputRAM Random Access Memory ROM Read Only Memory 4 C code structure This clause gives an overview of the structure of the bit-exact C code and

35、 provides an overview of the contents and organization of the C code attached to the present document. The C code has been verified on the following systems: - IBM PC/AT compatible computers with Windows NT40 and Microsoft Visual C+ v.6.0 compiler. - IBM PC/AT compatible computers with Windows NT40

36、and Intel C/C+ v.4.0 compiler. ANSI-C was selected as the programming language because portability was desirable. 4.1 Contents of the C source code The C code distribution has all files in the root level. The distributed files with suffix “c“ contain the source code and the files with suffix “h“ are

37、 the header files. The ROM data is contained in “rom“ files with suffix “c“. Makefiles are provided for the platforms in which the C code has been verified (listed above). Once the software is installed, this directory will have a compiled version of encoder and decoder and all the object files. 4.2

38、 Program execution The Adaptive Multi-Rate Wideband codec is implemented in two programs: - (encoder) speech encoder; - (decoder) speech decoder. The programs should be called like: - encoder encoder options ; - decoder . The speech files contain 16-bit linear encoded PCM speech samples and the para

39、meter files contain encoded speech data and some additional flags. The encoder and decoder options will be explained by running the applications without input arguments. See the file readme.txt for more information on how to run the encoder and decoder programs. ETSI ETSI TS 126 204 V15.0.0 (2018-07

40、)73GPP TS 26.204 version 15.0.0 Release 154.3 Code hierarchy Tables 1 and 2 are call graphs that show the functions used in the speech codec, including the functions of VAD, DTX, and comfort noise generation. Each column represents a call level and each cell a function. The functions contain calls t

41、o the functions in rightwards neighbouring cells. The time order in the call graphs is from the top downwards as the processing of a frame advances. All standard C functions: memcpy(), fwrite(), etc. have been omitted. The initialization of the static RAM (i.e. calling the _init functions) is also o

42、mitted. Table 1: Speech encoder call structure E_MAIN_encode E_UTIL_decim_12k8 E_UTIL_down_samp E_UTIL_interpol E_UTIL_decim_12k8 E_UTIL_hp50_12k8 _UTIL_hp50_12k8 E_UTIL_f_preemph _DTX_vad E_DTX_filter_bank E_DTX_filter5 E_DTX_filter3 E_DTX_level_calculation E_DTX_decision E_DTX_noise_estimate_updat

43、e E_DTX_update_cntrl E_DTX_hangover_addition E_DTX_speech_estimate E_DTX_tx_handler _DTX_reset E_LPC_isf_init E_MAIN_parm_store _UTIL_autocorr E_LPC_lag_wind _LPC_lev_dur E_LPC_a_isp_conversion E_LPC_chebyshev _LPC_f_int_isp_find E_LPC_f_isp_a_conversion E_LPC_f_isp_pol_get E_LPC_isp_isf_conversion

44、_GAIN_clip_isf_test E_LPC_a_weight_UTIL_residu E_UTIL_deemph _GAIN_lp_decim2E_GAIN_open_loop_search _GAIN_olag_median E_GAIN_sort E_DTX_pitch_tone_detection_GAIN_open_loop_search E_GAIN_olag_median_DTX_pitch_tone_detectionE_UTIL_residu _DTX_buffer E_DTX_exe E_DTX_frame_indices_find E_DTX_isf_history

45、_aver E_DTX_isf_q E_LPC_isf_sub_vq E_LPC_isf_noise_d E_LPC_f_isf_reorder E_DTX_dithering_control E_UTIL_random E_MAIN_reset E_GAIN_clip_init E_DTX_reset E_DTX_vad_reset E_LPC_isf_2s3s_quantise E_LPC_stage1_isf_vq E_LPC_isf_sub_vq E_LPC_stage1_isf_vq E_LPC_isf_sub_vq E_LPC_isf_2s3s_decode E_LPC_isf_r

46、eorder E_LPC_isf_2s5s_quantise E_LPC_stage1_isf_vq E_LPC_isf_sub_vq E_LPC_isf_2s5s_decode E_LPC_isf_reorder E_LPC_isf_isp_conversion _LPC_int_isp_find E_LPC_isp_a_conversion E_LPC_isp_pol_get E_UTIL_l_extract ETSI ETSI TS 126 204 V15.0.0 (2018-07)83GPP TS 26.204 version 15.0.0 Release 15E_UTIL_mpy_3

47、2_16 E_UTIL_l_extract E_UTIL_mpy_32_16 E_UTIL_residu _DTX_buffer E_UTIL_residuE_UTIL_synthesis E_LPC_a_weight _UTIL_residuE_UTIL_deemph _UTIL_f_preemph E_LPC_a_weightE_UTIL_synthesis E_UTIL_residu _LPC_a_weightE_UTIL_synthesis E_UTIL_deemph _GAIN_closed_loop_search E_GAIN_norm_corr E_UTIL_f_convolve

48、 E_GAIN_norm_corr_interpolate E_GAIN_clip_test _GAIN_adaptive_codebook_excitation E_UTIL_convolve E_ACELP_xy1_corr E_ACELP_codebook_target_update E_UTIL_convolve E_ACELP_xy1_corr E_ACELP_codebook_target_update E_UTIL_f_preemph _GAIN_f_pitch_sharpening E_ACELP_xh_corrE_ACELP_2t E_ACELP_4t E_ACELP_h_v

49、ec_corr1E_ACELP_h_vec_corr2E_ACELP_2pulse_search E_ACELP_quant_1p_N1 E_ACELP_quant_2p_2N1 E_ACELP_quant_3p_3N1 E_ACELP_quant_2p_2N1 E_ACELP_quant_1p_N1 E_ACELP_quant_4p_4N E_ACELP_quant_4p_4N1 E_ACELP_quant_2p_2N1 E_ACELP_quant_1p_N1 E_ACELP_quant_3p_3N1 E_ACELP_quant_2p_2N1 E_ACELP_quant_3p_3N1 E_ACELP_quant_5p_5N E_ACELP_quant_3p_3N1 E_ACELP_quant_2p_2N1 E_ACELP_quant_6p_6N_2 E_ACELP_quant_5p_5N E_ACELP_quant_1p_N1 E_ACELP_quant_4p_4N E_ACELP_quant_2p_2N1 E_ACELP_quant_3p_3N1 E_UTIL_preemph _GAIN_pitch_sharpen