ETSI TS 102 385-3-2008 Broadband Radio Access Networks (BRAN) HiperMAN Conformance Testing for WiMAX HiperMAN 1 2 1 Part 3 Abstract Test Suite (ATS)《宽带无线接入网(BRAN) HiperMAN WiMAX Hi.pdf

《ETSI TS 102 385-3-2008 Broadband Radio Access Networks (BRAN) HiperMAN Conformance Testing for WiMAX HiperMAN 1 2 1 Part 3 Abstract Test Suite (ATS)《宽带无线接入网(BRAN) HiperMAN WiMAX Hi.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 385-3-2008 Broadband Radio Access Networks (BRAN) HiperMAN Conformance Testing for WiMAX HiperMAN 1 2 1 Part 3 Abstract Test Suite (ATS)《宽带无线接入网(BRAN) HiperMAN WiMAX Hi.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 385-3 V2.5.1 (2008-12)Technical Specification Broadband Radio Access Networks (BRAN);HiperMAN;Conformance Testing for WiMAX/HiperMAN 1.2.1;Part 3: Abstract Test Suite (ATS)floppy3 ETSI ETSI TS 102 385-3 V2.5.1 (2008-12) 2 Reference RTS/BRAN-004T002-3R5 Keywords ATS, broadband, DLC, FWA,

2、 HiperMAN, MAC, Point-to-Multipoint, radio, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important no

3、tice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portab

4、le Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information

5、on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may

6、be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. WIMAX Forum 2008. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI

7、logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 385-3 V2.5.1 (2008-12) 3 Contents Intellectual Property Rights6 Foreword.6 1 Scope 7 2 References

8、 7 2.1 Normative references .7 2.2 Informative references8 3 Definitions and abbreviations.8 3.1 Definitions8 3.2 Abbreviations .8 4 Abstract Test Method (ATM).9 4.1 IEEE 802.16-2004 and ETSI HiperMAN protocol layers9 4.2 SS Test architecture10 4.3 BS Test architecture .11 5 Untestable Test Purposes

9、12 6 ATS conventions12 6.1 Testing conventions12 6.1.1 Testing States12 6.1.2 HiperMAN default values: Reception and transmission at ATS level13 6.1.3 Templates13 6.1.4 Functions 13 6.2 Naming conventions.13 6.2.1 General guidelines 13 6.2.2 Test Case (TC) identifier 14 7 External functions 16 7.1 L

10、ist organized by the type of external function16 7.1.1 Functions to trigger the IUT .16 7.1.1.1 IUT is a BS16 7.1.1.2 IUT is a SS 16 7.1.2 Functions to trigger the Tester 16 7.1.2.1 IUT is a BS16 7.1.2.2 IUT is a SS 16 7.1.3 Functions to check internal Testers event 17 7.1.3.1 IUT is a BS17 7.1.3.2

11、IUT is a SS 17 7.1.3.3 Function is independent of the IUTs type.17 7.1.4 Functions for computation 17 7.1.4.1 IUT is a BS17 7.1.4.2 IUT is a SS 17 7.1.4.3 Function is independent of the IUTs type.18 7.1.5 Specific TA functions .18 7.1.5.1 IUT is a BS18 7.1.5.2 IUT is a SS 18 7.1.5.3 Function is inde

12、pendent of the IUTs type.19 7.1.6 Functions for Operator action .19 7.1.6.1 IUT is a BS19 7.1.6.2 IUT is a SS 19 7.1.7 Functions for Interaction with external servers (IP connectivity).19 7.1.7.1 IUT is a BS19 7.1.7.2 IUT is a SS 20 7.1.7.3 Function is independent of the IUTs type.20 7.2 Description

13、 .20 7.2.1 Functions to trigger the IUT .20 ETSI ETSI TS 102 385-3 V2.5.1 (2008-12) 4 7.2.1.1 IUT is a BS20 7.2.1.2 IUT is a SS 22 7.2.2 Functions to trigger the Tester 22 7.2.2.1 IUT is a BS22 7.2.2.2 IUT is a SS 23 7.2.3 Functions to check internal Testers event 23 7.2.3.1 IUT is a BS23 7.2.3.2 IU

14、T is a SS 24 7.2.3.3 Function is independent of the IUTs type.24 7.2.4 Functions for computation 24 7.2.4.1 IUT is a BS24 7.2.4.2 IUT is a SS 25 7.2.4.3 Function is independent of the IUTs type.26 7.2.5 Specific TA functions .27 7.2.5.1 IUT is a BS27 7.2.5.2 IUT is a SS 28 7.2.5.3 Function is indepe

15、ndent of the IUTs type.32 7.2.6 Functions for Operator action .33 7.2.6.1 IUT is a BS33 7.2.6.2 IUT is a SS 33 7.2.7 Functions for Interaction with external servers (IP connectivity).33 7.2.7.1 IUT is a BS33 7.2.7.1.1 IUT side.33 7.2.7.1.2 TA side 34 7.2.7.2 IUT is a SS 34 7.2.7.2.1 IUT side.34 7.2.

16、7.2.2 TA side 35 7.2.7.3 Function is independent of the IUTs type.36 7.2.7.3.1 IUT side.36 7.2.7.3.2 TA side 36 Annex A (normative): Abstract Test Suite (ATS) .37 A.1 The TTCN-3 Module37 Annex B (normative): Partial PIXIT proforma for HiperMAN DLC 38 B.1 Identification summary.38 B.2 ATS summary 38

17、B.3 Test laboratory38 B.4 Client identification39 B.5 SUT 39 B.6 Protocol layer information39 B.6.1 Protocol identification 39 B.6.2 IUT information .40 B.6.2.1 Timers.40 B.6.2.2 Common Configuration 40 B.6.2.3 DL-MAP message 40 B.6.2.4 DCD message .40 B.6.2.5 UCD message .41 B.6.2.6 Common RNG Pixi

18、ts41 B.6.2.7 RNG-REQ message 41 B.6.2.8 RNG-RSP message.42 B.6.2.9 Common SBC Pixits.42 B.6.2.10 AUTH and KEY messages .43 B.6.2.11 Common REG Pixits 44 B.6.2.12 Common DSA Pixits 45 B.6.2.13 BWA.46 B.6.2.14 DBPC message .46 B.6.2.15 ICMP Echo Request and Reply messages 46 ETSI ETSI TS 102 385-3 V2.

19、5.1 (2008-12) 5 Annex C (normative): PCTR Proforma for HiperMAN DLC.47 C.1 Identification summary.47 C.1.1 Protocol conformance test report47 C.1.2 IUT identification.47 C.1.3 Testing environment.47 C.1.4 Limits and reservation48 C.1.5 Comments.48 C.2 IUT Conformance status 48 C.3 Static conformance

20、 summary .48 C.4 Dynamic conformance summary49 C.5 Static conformance review report.49 C.6 Test campaign report50 C.7 Observations.56 Annex D (informative): Bibliography.57 History 58 ETSI ETSI TS 102 385-3 V2.5.1 (2008-12) 6 Intellectual Property Rights IPRs essential or potentially essential to th

21、e present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI

22、 in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given a

23、s to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Broadband Radio Access Networks

24、(BRAN). The present document was developed on the basis of the Abstract Test Suite (ATS) specification for HiperMAN systems that was in the advanced stage of development when the work was reoriented to produce joint HiperMAN/WiMAX specifications. The present document is part 3 of a multi-part delive

25、rable covering Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.2.1, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS)“. ETSI

26、ETSI TS 102 385-3 V2.5.1 (2008-12) 7 1 Scope The present document contains the Abstract Test Suite (ATS) to test BRAN HiperMAN1.2.1/WiMAX systems for conformance. The objective of the present document is to provide a basis for conformance tests for BRAN HiperMAN/WiMAX equipment giving a high probabi

27、lity of air interface inter-operability between different manufacturers BRAN HiperMAN/WiMAX equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 5 and ISO/IEC 9646-2 6) as well as the ETSI rules for conformance testing (ETS 300 406 4) are used as a basis for the tes

28、t methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the SS side ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of the SS side

29、ATS. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the

30、following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at ht

31、tp:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possibl

32、e, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at th

33、e time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of th

34、e referenced document (including any amendments) applies. 1 ETSI TS 102 178 (V1.2.1): “Broadband Radio Access Networks (BRAN); HiperMAN; Data Link Control (DLC) layer“. 2 IEEE 802.16-2004: “IEEE Standard for local and metropolitan area networks - Part 16: Air Interface for Fixed Broadband Wireless A

35、ccess Systems“. ETSI ETSI TS 102 385-3 V2.5.1 (2008-12) 8 3 IEEE 802.16e-2005: “IEEE Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems - Amendment for Physical and Medium Access Control Layers for Combined Fixed and Mobi

36、le Operation in Licensed Bands“. 4 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 5 ISO/IEC 9646-1/ITU-T Recommendation X.290: “Information technology - Open Systems Interconnection - Conformance

37、testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-2/ITU-T Recommendation X.291: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. 7 ISO/IEC 9646-6/ITU-T Recommendation X.295

38、: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol profile test specification“. 8 ISO/IEC 9646-7/ITU-T Recommendation X.296: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework

39、 - Part 7: Implementation Conformance Statements“. 9 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 10 ETSI TS 102 210: “Broadband Radio Access Networks (BRAN); HIPERMAN; System profiles“. 2.2 Informati

40、ve references i.1 ISO 3166 (all parts): “Codes for the representation of names of countries and their subdivisions“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-7 8, TS 102 178 1, and IEEE 802.16-2004 2 as

41、corrected by Corrigendum 1 of IEEE 802.16e-2005 3 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TS 102 178 1, ISO/IEC 9646-1 5, ISO/IEC 9646-6 7, ISO/IEC 9646-7 8, IEEE 802.16-2004 2 as corrected by Corrigendum 1 of IEEE 802.16-2005 3 and the following

42、 apply: ATM Abstract Test Method ATS Abstract Test Suite BS Base Station BW BandWidthCID Connection IDentifier CS Convergence Sublayer DHCP Dynamic Host Configuration Protocol DLC Data Link Control IP Internet Protocol IUT Implementation Under Test MAC Medium Access Control OFDM Orthogonal Frequency

43、 Division Multiplexing OFDMA Orthogonal Frequency Division Multiple Access PCTR Protocol Conformance Test Report ETSI ETSI TS 102 385-3 V2.5.1 (2008-12) 9 PIXIT Partial Protocol Implementation Extra Information for Testing REQ REQuest RNG RaNGing RSP ReSPonse RTG Receive/Transmit Transition Gap SS S

44、ubscriber Station SUT System Under Test TC Test Case TFTP Trivial File Transfer Protocol TLV Type, Length, Value TP Test Purposes TTCN Tree and Tabular Combined Notation TTG Transmit/Receive Transition Gap4 Abstract Test Method (ATM) This clause describes the ATM used to test the IEEE 802.16-2004 2

45、and HiperMAN DLC layer at the BS side and at the SS side. 4.1 IEEE 802.16-2004 and ETSI HiperMAN protocol layers Figure 1 shows the mapping of the protocol layers of IEEE 802.16-2004 2 and ETSI HiperMAN 1. In the remaining text and figures of the present documentument only the ETSI terminology is us

46、ed. IEEE IEEE 802.16-2004 System Profiles (12) MAC (6, 7) OFDMA (8.4) OFDM (8.3) SCa (8.2) SC (8.1) ETSI HiperMAN System Profiles (TS 102 210) DLC (TS 102 178) PHY (TS 102 177) Figure 1: IEEE 802.16-2004 2 and ETSI HiperMAN protocol layers ETSI ETSI TS 102 385-3 V2.5.1 (2008-12) 104.2 SS Test archit

47、ecture Figure 2 describes the DLC SS Test Configuration for testing the DLC layer of a product implementing the HiperMAN base standard. More information for this architecture is provided below. TTCN-3 Test Case DLC TTCN-3 BS Simu SUT AdapterTRI Proprietary Transport HiperMAN/WiMAX SS SUT DLC (IUT) H

48、iperMAN/WiMAX DLC Test System TTCN-3 Upper Tester WirelessMAN-OFDM PHY Upper Tester Application Proprietary Transport PHY Transport mac Msg mac Bc Msg mac Pdu ActionReq + DataInd Broadcast Emulation Figure 2: DLC SS Test Configuration The DLC SS Test Configuration provides 1 test component: DLC TTCN

49、-3 uses macMsg port to send and receive MAC management messages that belong to the Initial Ranging, Basic, Primary and Secondary connection. Final verdicts are set on the receive statements. Additionally to the MAC message received, the real raw data received before decoding by the test adapter are necessary for log interpretation and fields computation (i.e. checks of the HMAC digest for example). It is also important to have received the EC bit to know if the received content is encrypted and th