EN ISO 52010-1-2017 en Energy performance of buildings - External climatic conditions - Part 1 Conversion of climatic data for energy calculations.pdf

《EN ISO 52010-1-2017 en Energy performance of buildings - External climatic conditions - Part 1 Conversion of climatic data for energy calculations.pdf》由会员分享，可在线阅读，更多相关《EN ISO 52010-1-2017 en Energy performance of buildings - External climatic conditions - Part 1 Conversion of climatic data for energy calculations.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、Energy performance of buildings External climatic conditionsPart 1: Conversion of climatic data for energy calculationsBS EN ISO 520101:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52010-1 July 2017 ICS

2、91.120.10 English Version Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calculations (ISO 52010-1:2017) Performance nergtique des btiments - Conditions climatiques extrieures - Partie 1: Conversion des donnes climatiques pour les calc

3、uls nergtiques (ISO 52010-1:2017) Energieeffizienz von Gebuden - uere Umweltbedingungen - Teil 1: Umrechnung von Wetterdaten als Eingangsgren fr Energieberechnungen (ISO 52010-1:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC

4、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or t

5、o any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offici

6、al versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N

7、orway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All righ

8、ts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 52010-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 520101:2017.The UK participation in its preparation was entrusted to Technical Committee B/540/2, Build

9、ing performance Moisture.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 201

10、7 Published by BSI Standards Limited 2017ISBN 978 0 580 87111 5ICS 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda

11、issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 520101:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52010-1 July 2017 ICS 91.120.10 English Version Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calc

12、ulations (ISO 52010-1:2017) Performance nergtique des btiments - Conditions climatiques extrieures - Partie 1: Conversion des donnes climatiques pour les calculs nergtiques (ISO 52010-1:2017) Energieeffizienz von Gebuden - uere Umweltbedingungen - Teil 1: Umrechnung von Wetterdaten als Eingangsgren

13、fr Energieberechnungen (ISO 52010-1:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteratio

14、n. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

15、translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, F

16、inland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR ST

17、ANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 52010-1:2017 EBS EN ISO 520101:20

18、17EN ISO 52010-1:2017 (E) 2 European foreword This document (EN ISO 52010-1:2017) has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment“ in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building compo

19、nents” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2018 and conflicting national standards shall be withdrawn at the latest by January 2018. At

20、tention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the Europea

21、n Free Trade Association. This document is part of the set of standards on the energy performance of buildings (the set of EPB standards) and has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480, see reference EF1 below), an

22、d supports essential requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, EF2). In case this standard is used in the context of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific applications, in pa

23、rticular for the application within the context of EU Directives transposed into national legal requirements. Further target groups are users of the voluntary common European Union certification scheme for the energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.

24、g. Pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standa

25、rd: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Sloven

26、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN ISO 520101:2017EN ISO 52010-1:2017 (E) 3 References: EF1 Mandate M/480, Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and

27、 promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010/31/EU) of 14th December 2010 EF2 EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU) of 14th December 2010 Endorse

28、ment notice The text of ISO 52010-1:2017 has been approved by CEN as EN ISO 52010-1:2017 without any modification. BS EN ISO 520101:2017This page deliberately left blank ISO 52010-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and abbreviati

29、ons . 24.1 Symbols . 24.2 Subscripts 35 Description of the methods . 45.1 Output of the method 45.2 General description of the method 46 Calculation method 56.1 Output data 56.2 Calculation time intervals 76.3 Input data 86.3.1 General 86.3.2 Weather station and climatic data set . 86.3.3 Climatic i

30、nput data . 96.3.4 Geometrical characteristics 96.3.5 Constants and physical data 106.3.6 Input data from Annex A (see Annex B) .116.4 Calculation procedure 116.4.1 Calculation of the sun path . 126.4.2 Split between direct and diffuse solar irradiance 166.4.3 Solar reflectivity of the ground . 186.

31、4.4 Calculation of the total solar irradiance at given orientation and tilt angle 186.4.5 Calculation of shading by external objects .226.4.6 Calculation of illuminance 257 Quality control .268 Compliance check .26Annex A (normative) Input and method selection data sheet Template 27Annex B (informat

32、ive) Input and method selection data sheet Default choices 31Bibliography .35 ISO 2017 All rights reserved iiiContents PageISO 52010-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and abbreviations . 24.1 Symbols . 24.2 Subscripts 35 Descrip

33、tion of the methods . 45.1 Output of the method 45.2 General description of the method 46 Calculation method 56.1 Output data 56.2 Calculation time intervals 76.3 Input data 86.3.1 General 86.3.2 Weather station and climatic data set . 86.3.3 Climatic input data . 96.3.4 Geometrical characteristics

34、96.3.5 Constants and physical data 106.3.6 Input data from Annex A (see Annex B) .116.4 Calculation procedure 116.4.1 Calculation of the sun path . 126.4.2 Split between direct and diffuse solar irradiance 166.4.3 Solar reflectivity of the ground . 186.4.4 Calculation of the total solar irradiance a

35、t given orientation and tilt angle 186.4.5 Calculation of shading by external objects .226.4.6 Calculation of illuminance 257 Quality control .268 Compliance check .26Annex A (normative) Input and method selection data sheet Template 27Annex B (informative) Input and method selection data sheet Defa

36、ult choices 31Bibliography .35 ISO 2017 All rights reserved iiiContents PageBS EN ISO 520101:2017ISO 52010-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standar

37、ds is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take

38、 part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In part

39、icular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements o

40、f this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see

41、 www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well

42、as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.ISO 52010-1 was prepared by ISO Technical Committee ISO/TC 163, Thermal performance and energy use in the built envi

43、ronment, Subcommittee SC 2, Calculation methods, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performance of buildings and building components, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agree

44、ment).A list of all the parts in the ISO 52010 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 520101:2017ISO 52010-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). Th

45、e work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-gov

46、ernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described i

47、n the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to th

48、e possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO

49、list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ forew