EN ISO 16283-1-2014 en Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1 Airborne sound insulation (Incorporates Amendament A1 2017)《.pdf

《EN ISO 16283-1-2014 en Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1 Airborne sound insulation (Incorporates Amendament A1 2017)《.pdf》由会员分享，可在线阅读，更多相关《EN ISO 16283-1-2014 en Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1 Airborne sound insulation (Incorporates Amendament A1 2017)《.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 16283-1:2014Incorporating corrigendum June 2014 Acoustics Field measurementof sound insulation in buildingsand of building elementsPart 1: Airborne sound insulation BS EN ISO 16283-1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementati

2、on of EN ISO 16283-1:2014. The UK participation in its preparation was entrusted by Technical Committee EH/1, Acoustics, to Subcommittee EH/1/6, Building acoustics.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport t

3、o include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 86598 5ICS 91.120.20Compliance with a British Standard cannot confer immunity from legal obligations.

4、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2014.Amendments/corrigenda issued since publicationDate Text affected30 June 2014 Correction to supersession information in National ForewordIt supersedes BS EN ISO 140-4:1998 which

5、is withdrawn. Together with BS EN ISO 16283-2, it supersedes BS EN ISO 140-7:1998 which will be withdrawn upon publication of BS EN ISO 16283-2. Together with BS EN ISO 16283-3, it supersedes BS EN ISO 140-5:1998 which will be withdrawn upon publication of BS EN ISO 16283-3. Together with BS EN ISO

6、16283-2 and BS EN ISO 16283-3, it supersedes BS EN ISO 140-14:2004 which will be withdrawn upon publication of BS EN ISO 16283-2 and BS EN ISO 16283-3.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16283-1 February 2014 ICS 91.120.20 Supersedes EN ISO 140-14:2004, EN ISO 140-4:1998, EN ISO

7、 140-5:1998, EN ISO 140-7:1998English Version Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 16283-1:2014) Acoustique - Mesurage in situ de lisolation acoustique des btiments et des lments de construction - Partie 1: I

8、solation des bruits ariens (ISO 16283-1:2014) Akustik - Messung der Schalldmmung in Gebuden und von Bauteilen am Bau - Teil 1: Luftschalldmmung (ISO 16283-1:2014) This European Standard was approved by CEN on 4 January 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations w

9、hich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This

10、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN member

11、s are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal

12、, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form

13、and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16283-1:2014 EBS EN ISO 16283-1:2014EN ISO 16283-1:2014 (E) 3 Foreword This document (EN ISO 16283-1:2014) has been prepared by Technical Committee ISO/TC 43 “Acoustics” in collaboration with the Technical Committee CEN/TC

14、 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2014, and conflicting national st

15、andards shall be withdrawn at the latest by August 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN I

16、SO 140-7:1998, EN ISO 140-5:1998, EN ISO 140-4:1998, EN ISO 140-14:2004. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denm

17、ark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement no

18、tice The text of ISO 16283-1:2014 has been approved by CEN as EN ISO 16283-1:2014 without any modification. BS EN ISO 16283-1:2014EN ISO 16283-1:2014 (E)BS EN ISO 16283-1:2014ISO 16283-1:2014(E) ISO 2014 All rights reserved iiiContents PageForeword vIntroduction vi1 Scope . 12 Normative references 1

19、3 Terms and definitions . 14 Instrumentation 54.1 General . 54.2 Calibration 54.3 Verification . 55 Frequency range . 56 General 67 Default procedure for sound pressure level measurement . 77.1 General . 77.2 Generation of sound field . 77.3 Fixed microphone positions 87.4 Mechanized continuously-mo

20、ving microphone . 97.5 Manually-scanned microphone . 107.6 Minimum distances for microphone positions 127.7 Averaging times . 127.8 Calculation of energy-average sound pressure levels 138 Low-frequency procedure for sound pressure level measurement .148.1 General 148.2 Generation of sound field 148.

21、3 Microphone positions 148.4 Averaging time . 158.5 Calculation of low-frequency energy-average sound pressure levels 159 Background noise (default and low-frequency procedure) .169.1 General 169.2 Correction to the signal level for background noise 1710 Reverberation time in the receiving room (def

22、ault and low-frequency procedure) 1710.1 General 1710.2 Generation of sound field 1810.3 Default procedure 1810.4 Low-frequency procedure 1810.5 Interrupted noise method 1810.6 Integrated impulse response method 1811 Conversion to octave bands 1912 Recording results 1913 Uncertainty 1914 Test report

23、 19Annex A (normative) Requirements for loudspeakers 21Annex B (informative) Forms for recording results.22Annex C (informative) Additional guidance .25Annex D (informative) Horizontal measurements Examples of suitable loudspeaker and microphone positions 30Annex E (informative) Vertical measurement

24、s Examples of suitable loudspeaker and BS EN ISO 16283-1:2014ISO 16283-1:2014(E)iv ISO 2014 All rights reservedmicrophone positions 37Bibliography .43BS EN ISO 16283-1:2014ISO 16283-1:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standa

25、rds bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organ

26、izations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its f

27、urther maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/direc

28、tives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the

29、Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related

30、to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.T

31、his first edition of ISO 16283-1 cancels and replaces ISO 140-4:1998, ISO 140-5:1998, ISO 140-7:1998, and ISO 140-14:2004, which have been technically revised.ISO 16283 consists of the following parts, under the general title Acoustics Field measurement of sound insulation in buildings and of buildi

32、ng elements: Part 1: Airborne sound insulation Part 2: Impact sound insulation1) Part 3: Faade sound insulation2)1) To be published.2) Under development. ISO 2014 All rights reserved vBS EN ISO 16283-1:2014ISO 16283-1:2014(E)IntroductionISO 16283 (all parts) describes procedures for field measuremen

33、ts of sound insulation in buildings. Airborne, impact and faade sound insulation are described in ISO 16283-1, ISO 16283-23)and ISO 16283-34), respectively.Field sound insulation measurements that were described previously in ISO 140-4, 5, and 7 were (a) primarily intended for measurements where the

34、 sound field could be considered to be diffuse, and (b) not explicit as to whether operators could be present in the rooms during the measurement. ISO 16283 differs from ISO 140-4, 5, and 7 in that (a) it applies to rooms in which the sound field may or may not approximate to a diffuse field, (b) it

35、 clarifies how operators can measure the sound field using a hand-held microphone or sound level meter and (c) it includes additional guidance that was previously contained in ISO 140-14.NOTE Survey test methods for field measurements of airborne and impact sound insulation are dealt with in ISO 100

36、52.3) To be published.4) Under development.vi ISO 2014 All rights reservedBS EN ISO 16283-1:2014Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation1 ScopeThis part of ISO 16283 specifies procedures to determine the airborne sound in

37、sulation between two rooms in a building using sound pressure measurements. These procedures are intended for room volumes in the range from 10 m3to 250 m3in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess and compare the airborne sound insulation in unfu

38、rnished or furnished rooms where the sound field may or may not approximate to a diffuse field. The measured airborne sound insulation is frequency-dependent and can be converted into a single number quantity to characterize the acoustic performance using the rating procedures in ISO 717-1.2 Normati

39、ve referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app

40、lies.ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulationISO 3382-2, Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary roomsISO 12999-1, Acoustics Determination and application of measurement un

41、certainties in building acoustics Part 1: Sound insulation1)ISO 18233, Acoustics Application of new measurement methods in building and room acousticsIEC 60942, Electroacoustics Sound calibratorsIEC 61183, Electroacoustics Random-incidence and diffuse-field calibration of sound level metersIEC 61260

42、, Electroacoustics Octave-band and fractional-octave-band filtersIEC 61672-1, Electroacoustics Sound level meters Part 1: Specifications3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.1) To be published.INTERNATIONAL STANDARD ISO 16283-1:2014(E) IS

43、O 2014 All rights reserved 1BS EN ISO 16283-1:2014ISO 16283-1:2014(E)3.1energy-average sound pressure level in a roomLten times the common logarithm of the ratio of the space and time average of the squared sound pressure to the square of the reference sound pressure, with the space average taken ov

44、er the central zone of the room where the direct radiation from any loudspeaker or the nearfield radiation from the room boundaries has negligible influenceNote 1 to entry: L is expressed in decibels.3.2corner sound pressure level in a roomLCornerten times the common logarithm of the ratio of the hi

45、ghest time average squared sound pressure from the set of corner measurements to the square of the reference sound pressure, for the low-frequency range (50, 63, and 80 Hz one-third octave bands)Note 1 to entry: LCorneris expressed in decibels.3.3low-frequency energy-average sound pressure level in

46、a roomLLFten times the common logarithm of the ratio of the space and time average of the squared sound pressure to the square of the reference sound pressure in the low-frequency range (50, 63, and 80 Hz one-third octave bands) where the space average is a weighted average that is calculated using

47、the room corners where the sound pressure levels are highest and the central zone of the room where the direct radiation from any loudspeaker or the nearfield radiation from the room boundaries has negligible influenceNote 1 to entry: LLFis expressed in decibels.Note 2 to entry: LLFis an estimate of

48、 the energy-average sound pressure level for the entire room volume.3.4reverberation timeTtime required for the sound pressure level in a room to decrease by 60 dB after the sound source has stoppedNote 1 to entry: T is expressed in seconds.3.5background noise levelmeasured sound pressure level in t

49、he receiving room from all sources except the loudspeaker in the source room3.6fixed microphonemicrophone that is fixed in space by using a device such as a tripod so that it is stationary3.7mechanized continuously-moving microphonemicrophone that is mechanically moved with approximately constant angular speed in a circle, or is mechanically swept along a circular path where the angle of rotation about a fixed axis is between 270 and 3603.8manually-scanned microphonemicrophone attached to a hand-held sound level