EN ISO 6530-2005 en Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids《防护服 对液态化学制品的防护 材料抗液体渗透性的试验方法 ISO 6.pdf

《EN ISO 6530-2005 en Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids《防护服 对液态化学制品的防护 材料抗液体渗透性的试验方法 ISO 6.pdf》由会员分享，可在线阅读，更多相关《EN ISO 6530-2005 en Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids《防护服 对液态化学制品的防护 材料抗液体渗透性的试验方法 ISO 6.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 6530:2005 Incorporating Corrigendum No.1 Protective clothing Protection against liquid chemicals Test method for resistance of materials to penetration by liquids The European Standard EN ISO 6530:2005 has the status of a British Standard ICS 13.340.10 BS EN ISO 6530:2005

2、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 17 February 2005 BSI 23 February 2005 ISBN 0 580 45484 3 National foreword This British Standard is the official English language version of EN ISO 6530:2005. It is identical with ISO 6530:2005.

3、 It supersedes BS EN 368:1993, which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PH/3, Protective clothing, to Subcommittee PH/3/3, Protective clothing against chemicals and radioactive contamination, which has the responsibility to: A list of organizat

4、ions represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Corresponde

5、nce Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of its

6、elf confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and

7、promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indi

8、cates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 15608 23 February 2005 Corrected Standard number on back cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 6530 February 2005 ICS 13.340.10 Supersedes EN 368:1992 English version Protect

9、ive clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) Vtements de protection - Protection contre les produits chimiques liquides - Mthode dessai pour la rsistance des matriaux la pntration par des liquides (ISO 6530:200

10、5) Schutzkleidung - Schutz gegen flssige Chemikalien - Prfverfahren: Bestimmung des Widerstands von Materialien gegen die Durchdringung von Flssigkeiten (ISO 6530:2005) This European Standard was approved by CEN on 24 December 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regul

11、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Eu

12、ropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the na

13、tional standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. E

14、UROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 6530:2005: E Forewo

15、rd This document (EN ISO 6530:2005) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets“, the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 94 “Personal safety - Protective clothing and equ

16、ipment“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2005, and conflicting national standards shall be withdrawn at the latest by August 2005. This document supersedes EN 368:1992. This

17、 document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According

18、to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

19、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. ENISO6530:2005 Reference number ISO 6530:2005(E)INTERNATIONAL STANDARD ISO 6530 Third edition 2005-02-01 Protective clothing Protection against liquid chemicals Test method for

20、 resistance of materials to penetration by liquids Vtements de protection Protection contre les produits chimiques liquides Mthode dessai pour la rsistance des matriaux la pntration par des liquides ENISO6530:2005IS:0356 O5002(E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocn

21、adrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods lic

22、ensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti

23、.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ii ENISO6530:2005 iiiForeword ISO (the International Organization for Standa

24、rdization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right t

25、o be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Sta

26、ndards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an In

27、ternational Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 6530

28、 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety Protective clothing and equipment, Subcommittee SC 13, Protect

29、ive clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This third edition cancels and replaces the second edition (ISO 6530:1990), which has been technically revised. ENISO6530:2005iv Introduction This International Standard specifies a test m

30、ethod for measuring indices of penetration, absorption and repellency for protective clothing materials against low-volume, low-pressure splashes of liquid chemicals, usually chemicals of low volatility. ISO 13994 may be used for determining the penetration resistance of protective clothing material

31、s against chemicals in larger volume and higher pressure splashes. Clothing made of these materials should not be used as the sole means of protection where resistance to permeation by chemicals at the molecular level (see ISO 6529) is essential and where a complete barrier to liquid (or gaseous) ch

32、emicals is required (e.g. risk of exposure to massive and forceful discharges of concentrated liquid chemicals). Data obtained by this test method may be used as a guide for screening protective clothing materials. Clothing, which has been developed from materials selected by this method of test sho

33、uld be used, therefore, only in well-defined circumstances when an evaluation of the finished item has indicated an acceptable level of performance (in laboratory and field-testing of a garment, consideration of exposure levels to specified chemicals, etc.). In interpreting the results of the test m

34、ethod, the influences of the physical properties of the test chemical (e.g. volatility) should also be taken into consideration. ENISO6530:2005INTENRATIONAL TSANDADR IS:0356 O5002(E)1Protective clothing Protection against liquid chemicals Test method for resistance of materials to penetration by liq

35、uids 1 Scope This International Standard specifies a test method for the measurement of indices of penetration, absorption and repellency for protective clothing materials against liquid chemicals, mainly chemicals of low volatility. Two levels of the potential performance of materials are assessed

36、by this method of testing to meet with possible requirements for protection against a) deposition on the surface of a material, at minimal pressure, of spray droplets up to coalescence or occasional small drips; b) contamination by a single low-volume splash or low-pressure jet, allowing sufficient

37、time to divest the clothing or take other action as necessary to eliminate any hazard to the wearer from chemical retained by the protective garment, or, in circumstances where pressure is applied to liquid contaminants on the surface of the clothing material, as a result of natural movements of the

38、 wearer (flexing of contaminated areas of clothing at arms, knees, shoulders) and contact with contaminated surfaces (e.g. walking through sprayed foliage). 2 Definitions For the purpose of this document, the following terms and definitions apply. 2.1 penetration process by which a chemical moves th

39、rough pores, apertures or essential openings in a material or finished item of clothing NOTE The apertures can be the result of mechanical damage. 2.2 permeation process by which a chemical moves through a protective clothing material on a molecular level NOTE Permeation involves the following: a) s

40、orption of the molecules of the chemical onto the contact surface (outer surface) of the material; b) diffusion of the sorbed molecules into the material; c) desorption of the molecules from the opposite (inner) surface of the material. 2.3 repellency ability of a material to shed liquid that is app

41、lied to its surface ENISO6530:20052 3 Principle A measured volume of a test liquid is applied in the form of a fine stream or jet to the surface of a clothing material resting in an inclined gutter. Determination of the respective proportions of the applied liquid which penetrate a test specimen and

42、 which are repelled by its surface indicates the potential of the material for use in the described field of application. 4 Method 4.1 Apparatus The apparatus, as assembled (see Figure 1), shall comprise the following: rigid transparent gutter, of semi-cylindrical shape, with an internal diameter (1

43、25 5) mm, length (300 2) mm and inclination 45; rigid cover (not shown in Figure 1), semi-cylindrical in shape, length 270 mm, external diameter (105 5) mm and an evenly distributed mass of (140 7) g; hypodermic needle, bore (0,8 0,02) mm; length is not critical but the pointed tip shall be removed

44、and the end ground flat; syringe or other leak-free attachment to the needle, capable of delivering (10 0,5) cm 3of test liquid; motorized syringe-drive unit or a hydraulic pump or other pressurized system, to deliver the correct volume of test liquid (10 0,5) cm 3 in an unbroken stream or jet via t

45、he needle within (10 1) s; manual delivery or gravity shall not be used; WARNING Appropriate precautions applicable to the use of equipment under pressure and the forceful discharge of liquid chemicals should be taken. mounting device, for maintaining the hypodermic needle and attachments in their r

46、equired positions (see Figure 1); small beaker; balance, accurate to 0,01 g; transparent film, resistant to the test liquid; absorbent paper 1) , 0,15 mm to 0,2 mm thick; stopwatch, accurate to 0,1 s; temperature controlled room or cabinet, to enable tests to be carried out at temperatures other tha

47、n ambient. NOTE 1 The transparent film is to protect the gutter and obviate the need to rinse it between tests. NOTE 2 The filter paper will show any passage of the test liquid through the test specimen. The semi-cylindrical cover is used to maintain intimate contact between the contaminated area of

48、 the test specimen and the filter paper after release of the test liquid. 1) Filter paper Whatman no. 1 is found to be suitable for this purpose. This information is given for the convenience of users of this ISO 6530 and does not constitute an endorsement by ISO of the product named. Equivalent pro

49、ducts may be used if they can be shown to lead to the same results. ENISO6530:2005 34.2 Test liquid 4.2.1 Selection Use that liquid (or those liquids) against which protection is required. If necessary, and in particular for safety reasons, substitutes may be used, provided that it can be demonstrated that their results are similar to those of the chemicals against which protection is required. Water adjusted