EN ISO 6529-2001 en Protective Clothing - Protection Against Chemicals - Determination of Protective Clothing Materials to Permeation by Liquids and Gases《防护服 化学试剂的防护 测定防护服面料防液体和气体.pdf

《EN ISO 6529-2001 en Protective Clothing - Protection Against Chemicals - Determination of Protective Clothing Materials to Permeation by Liquids and Gases《防护服 化学试剂的防护 测定防护服面料防液体和气体.pdf》由会员分享，可在线阅读，更多相关《EN ISO 6529-2001 en Protective Clothing - Protection Against Chemicals - Determination of Protective Clothing Materials to Permeation by Liquids and Gases《防护服 化学试剂的防护 测定防护服面料防液体和气体.pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases The European Standard EN IS0 6529:2001 has the status of a British Standard ICs 13.340.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS

2、PERMITTED BY COPYRIGHT LAW BS EN IS0 6529:2001 BS EN IS0 6529:2001 Amd.No. Date National foreword Comments This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee title, was published under the authority of the Standards Policy and Stra

3、tegy Committee on 13 November 2001 O BSI 13 November 2001 This British Standard is the official English language version of EN IS0 6529:2001. It is identical with IS0 6529:2001. It supersedes BS EN 369:1993 which is withdrawn. The UK participation in its preparation was entrusted by Technical Commit

4、tee PH/3, Protective clothing, to Subcommittee PH/3/3, Protective clothing against chemicals, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible internationallEuropean committee any enquiries on the interpretation, or proposals for change, and keep

5、the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publ

6、ications referred to in this document may be found in the BSI Standards Catalogue under the section entitled ?International Standards Correspondence Index?, or by using the ?Find? facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary pro

7、visions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN IS0 title page, the EN

8、IS0 foreword page, the IS0 title page, pages ii to v, a blank page, pages 1 to 29, the annex ZB page, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication ISBN O 580 38672 4 EUROPEAN

9、STANDARD NORME EUROPENNE EUROPISCHE NORM EN IS0 6529 October 2001 ICs 13.340.10 Supersedes EN 369:1993 English version Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (IS0 6529:2001) Vtements de prot

10、ection - Protection contre les produits chimiques - Dtermination de la rsistance des matriaux utiliss pour la confection des vtements de protection a la permation par des liquides et des gaz (IS0 6529:2001) Schutzkleidung - Schutz gegen Chemikalien - Bestimmung des Widerstands von Schutzkleidungsmat

11、erialien gegen die Permeation von Flssigkeiten und Gasen (IS0 6529:2001) This European Standard was approved by CEN on 4 October 2001 CEN members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st

12、andard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other l

13、anguage made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,

14、 Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 6-1050 Brussels O 2001 CEN All rights of exp

15、loitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN IS0 6529:2001 E EN IS0 6529:2001 (E) Foreword The text of the International Standard IS0 6529:2001 has been prepared by Technical Committee ISO/TC 94 “Personal safety - Protective clothing and equipment“

16、in collaboration with Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets“, the secretariat of which is held by DIN. This European Standard supersedes EN 369:1993. This European Standard shall be given the status of a national standard, either by pub

17、lication of an identical text or by endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest by April 2002. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, a

18、nd supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this standard. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

19、 this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTE FROM CMC The foreword is susceptible to be amended on reception of the Ger

20、man language version. The confirmed or amended foreword, and when appropriate, the normative annex ZA for the references to international publications with their relevant European publications will be circulated with the German version. Endorsement notice The text of the International Standard IS0 6

21、529:2001 was approved by CEN as a European Standard without any modification. I NTERNATI ON AL STANDARD IS0 6529 Second edition 2001-10-15 Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases Vtements de

22、protection - Protection contre les produits chimiques - Dtermination de la rsistance des matriaux utiliss pour la confection des vtements de protection la permation par des liquides et des gaz Reference number IS0 6529:2001(E) EN IS0 6529:2001 Con tents Page Foreword . iv Introduction . v 1 2 3 4 5

23、5.1 5.2 5.3 5.4 6 7 7.1 7.2 7.3 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 9 Scope 1 Normative references 1 Terms and definitions . 2 Principle 5 Choice of analytical technique and collection medium . 5 General 5 Gaseous collection medium . 5 Liquid collection medium . 6 Other collection medium . 6

24、Apparatus . 6 Sampling . 11 Sampling procedure 11 Preparation of test specimens . 12 Measurement of test specimen thickness and mass . 12 Procedure . 12 Calibration 12 Preparation of test apparatus . 12 Method A - Liquid chernicals with continuous contact . 14 Method B - Gaseous chemicals with conti

25、nuous contact 14 Method C - Liquid or gaseous chemical with intermittent contact 16 Preparation of permeation plot 17 Determination of breakthrough detection time and normalized breakthrough detection time . 17 Calculation of permeation rate and cumulative permeation . 18 Visual assessment of test s

26、pecimen . 19 Repeat tests 19 Report . 20 Annex A (informative) Recommended list of chemicals for comparing permeation resistance of protective clothing materials 22 Annex B (informative) Precision information for test method 24 Annex C (informative) Sources of permeation test cells and permeation te

27、st cell parts 25 test systems . 26 Bibliography 29 Annex D (informative) Suggested procedure for measuring the sensitivity of open-loop permeation- iii _ EN IS0 6529:2001 Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 mem

28、ber bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmen

29、tal and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISOAEC Direct

30、ives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elem

31、ents of this International Standard may be the subject of patent rights. IS0 shall not be held responsible for identifying any or all such patent rights. International Standard IS0 6529 was prepared by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, Subcommittee S

32、C 13, Protective clothing. This second edition cancels and replaces the first edition (IS0 6529:1990), which has been technically revised. Annexes A to D of this International Standard are for information only. iv EN IS0 6529:2001 Introduction Workers involved in the production, use, transportation,

33、 and emergency response with liquid and gaseous chemicals can be exposed to numerous compounds capable of causing harm upon contact with the human body. The deleterious effects of these chemicals can range from acute trauma such as skin irritation and burn to chronic degenerative disease, such as ca

34、ncer. Since engineering controls may not eliminate all possible exposures, attention is often placed on reducing the potential for direct skin contact through the use of protective clothing that resists permeation, penetration and degradation. These test methods are normally used to evaluate the bar

35、rier effectiveness of materials used for protective clothing and specimens from finished items (see Note 1) of protective clothing against permeation of either liquid or gaseous chemicals. Options are provided for conducting this testing under both conditions of continuous or intermittent contact wi

36、th the chemicals. These test methods provide various options for reporting test results in terms of breakthrough time, permeation rate and cumulative permeation to allow a comparison of protective clothing material permeation resistance. These parameters are key measures of the effectiveness of a cl

37、othing material to act as a barrier to the test chemical. Such information is used in the comparison of clothing materials during the process of selecting clothing for protection from hazardous chemicals. Long breakthrough detection times and normalized breakthrough detection times as well as low pe

38、rmeation rates are characteristic of the best barriers. Resistance to penetration by liquid chemicals should be determined by using IS0 6530 while resistance to penetration by liquid chemicals under pressure should be determined by using IS0 13994. These International Standards are listed in the Bib

39、liography. It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced people for whose guidance it has been prepared and that appropriate precautions will be taken to avoid injury to health and conta

40、mination of the environment. NOTE 1 Finished items of protective clothing include gloves, arm shields, aprons, suits, hoods, boots, etc. The phrase “specimens from finished items” encompasses seamed and other discontinuous regions as well as the usual continuous regions of protective clothing items.

41、 NOTE 2 using this test method cannot be used to infer safe exposure levels. At present, no quantitative information exists about acceptable levels of dermal contact. Therefore, the data obtained V EN IS0 6529:2001 Protective clothing - Protection against chemicals - Determination of resistance of p

42、rotective clothing materials to permeation by liquids and gases 1 Scope This International Standard describes laboratory test methods that enable a determination of the resistance of materials used in protective clothing to permeation by liquid or gaseous chemicals under the conditions of either con

43、tinuous or intermittent contact. Method A (see 8.3) is applicable to the testing of liquid chemicals, either volatile or soluble in water, expected to be in continuous contact with the protective clothing material. Method B (see 8.4) is applicable to the testing of gaseous chemicals expected to be i

44、n continuous contact with the protective clothing material. Method C (see 8.5) is applicable to the testing of liquid chemicals, either volatile or soluble in water, expected to be in intermittent contact with the protective clothing material. These test methods are only suitable for the testing of

45、air-impermeable protective clothing materials. They assess the permeation resistance of the protective clothing material under laboratory conditions in terms of breakthrough time, permeation rate, and cumulative permeation. These test methods also enable observations to be made of the effects of the

46、 test liquid on the protective clothing material under test. These test methods address only the performance of materials or certain material constructions (e.g. seams) used in protective clothing. These test methods do not address the design, overall construction and components, or interfaces of ga

47、rments or other factors which may affect the overall protection offered by the protective clothing. It is emphasized that these tests do not necessarily simulate conditions to which clothing materials are likely to be exposed in practice. The use of test data should therefore be restricted to broad

48、comparative assessment of such material according to their permeation-resistance characteristics. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent

49、amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IS0 and IEC maintain registers of currently valid International Standards. IS0 139, Textiles - Standard atmospheres for conditioning and testing IS0 2286-2, Rubber- or plastics-coated fabrics - Determination