EN 61915-1-2008 en Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1 General rules for the development of device profiles《低压开关设备和控制.pdf

《EN 61915-1-2008 en Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1 General rules for the development of device profiles《低压开关设备和控制.pdf》由会员分享，可在线阅读，更多相关《EN 61915-1-2008 en Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1 General rules for the development of device profiles《低压开关设备和控制.pdf（96页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 61915-1:2008Low-voltage switchgear and controlgear Device profiles for networked industrial devices Part 1: General rules for the development of device profiles ICS 29.130.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g

2、38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 61915-1:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2008 BSI 2008ISBN 978 0 580 56289 1National forewordThis British Standa

3、rd is the UK implementation of EN 61915-1:2008. It is identical to IEC 61915-1:2007.The UK participation in its preparation was entrusted by Technical Committee PEL/17, Switchgear, controlgear, and HV-LV co-ordination, to Subcommittee PEL/17/2, Low voltage switchgear and controlgear.A list of organi

4、zations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligation

5、s.Amendments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARD EN 61915-1 NORME EUROPENNE EUROPISCHE NORM January 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Cent

6、ral Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61915-1:2008 E ICS 29.130.20 English version Low-voltage switchgear and controlgear - Device profiles for networked indust

7、rial devices - Part 1: General rules for the development of device profiles (IEC 61915-1:2007) Appareillage basse tension - Profils dappareil pour les appareils industriels mis en rseau - Partie 1: Rgles gnrales pour le dveloppement de profils dappareil (CEI 61915-1:2007) Niederspannungsschaltgerte

8、- Gerteprofile fr vernetzte industrielle Schaltgerte - Teil 1: Allgemeine Festlegungen fr die Entwicklung von Gerteprofilen (IEC 61915-1:2007) This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

9、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exis

10、ts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national elect

11、rotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer

12、land and the United Kingdom. Foreword The text of document 17B/1575/FDIS, future edition 1 of IEC 61915-1, prepared by SC 17B, Low-voltage switchgear and controlgear, of IEC TC 17, Switchgear and controlgear, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61915-1 on

13、 2007-12-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-12-

14、01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61915-1:2007 was approved by CENELEC as a European Standard without any modification. _ BS EN 61915-1:2008 2 CONTENTS INTRODUCTION.7 1 Scope.8 2 Normative references .8 3 Definitions, abbreviations

15、 and symbols.9 3.1 Terms and definitions 9 3.2 Abbreviations and symbols11 4 Device profiles .11 4.1 General .11 4.2 Root device profile 12 4.3 Manufacturers device profile.12 4.3.1 General .12 4.3.2 Manufacturers device profile created using a root device profile .13 4.3.3 Manufacturers device prof

16、ile created without using a root device profile13 4.4 Profile relationships.14 5 Creating a root device profile using the device profile template 14 5.1 General .14 5.2 Root device profile header.15 5.2.1 General .15 5.2.2 Root device profile ID 15 5.2.3 Root device profile version 15 5.2.4 Root dev

17、ice profile release date 16 5.2.5 Device description .16 5.3 Parameters (root device profile) 16 5.3.1 General .16 5.3.2 Parameter name (mandatory) 16 5.3.3 Data type (mandatory) .16 5.3.4 Units (mandatory)17 5.3.5 Offset and multiplier (mandatory).17 5.3.6 Range (mandatory)18 5.3.7 Access (mandator

18、y).18 5.3.8 Required (mandatory)18 5.3.9 Parameter description (optional)19 5.3.10 Recommended parameters for device identification .19 5.4 Complex data types (root device profile)20 5.4.1 General .20 5.4.2 Array data type20 5.4.3 Structured data type 21 5.4.4 Enumerated data type .23 5.5 Parameter

19、assemblies (root device profile)24 5.5.1 General .24 5.5.2 Parameter assembly name (mandatory).25 5.5.3 Access (mandatory).25 5.5.4 Required (mandatory)25 BS EN 61915-1:2008 3 5.5.5 Parameter assembly data (mandatory) 25 5.6 Parameter groups (root device profile) 26 5.6.1 General .26 5.6.2 Group nam

20、e (mandatory).27 5.6.3 Group type (mandatory).27 5.6.4 Number of members (mandatory) 27 5.6.5 Required (mandatory)27 5.6.6 Description (optional) 27 5.6.7 Additional information (optional) 27 5.6.8 Member names (mandatory) 27 5.7 Functional elements (root device profile) .27 5.7.1 General .27 5.7.2

21、Functional structure diagram (optional)29 5.7.3 Functional element list (optional) .30 5.8 State model (root device profile)30 5.8.1 General .30 5.8.2 State model name .30 5.8.3 State chart diagrams .31 5.8.4 State transition tables32 5.9 Services (root device profile).35 5.9.1 General .35 5.9.2 Ser

22、vice name (mandatory).35 5.9.3 Request parameter group (optional) 35 5.9.4 Response parameter group (optional)35 5.9.5 Required (mandatory)35 5.9.6 Description (optional) 35 5.9.7 Additional information (optional) 35 6 Creating a manufacturers device profile using a root device profile36 6.1 General

23、 .36 6.2 Manufacturers device profile header.36 6.2.1 General .36 6.2.2 Manufacturers device profile ID (mandatory).36 6.2.3 Manufacturers device profile description (optional) .36 6.2.4 Manufacturers device profile version (mandatory).37 6.2.5 Manufacturers device profile release date (mandatory) .

24、37 6.2.6 Manufacturer ID (mandatory).37 6.2.7 Model compatibility (optional) 37 6.2.8 Software compatibility (optional)37 6.2.9 Hardware compatibility (optional).37 6.2.10 Profile type (mandatory) 37 6.2.11 Profile availability (mandatory) 38 6.2.12 Additional information (optional) 38 6.3 Implement

25、ation of root device profile parameters 38 6.4 Parameters (manufacturer-specific).38 6.5 Implementation of root device profile complex data types 39 6.6 Complex data types (manufacturer-specific) 39 6.7 Implementation of root device profile parameter assemblies39 6.8 Parameter assemblies (manufactur

26、er-specific) 40 6.9 Implementation of root device profile parameter groups.40 BS EN 61915-1:2008 4 6.10 Parameter groups (manufacturer-specific).41 6.11 Implementation of root device profile functional elements41 6.12 Functional elements (manufacturer-specific) .42 6.13 State model (manufacturer-spe

27、cific) 42 6.14 Implementation of root device profile services .42 6.15 Services (manufacturer-specific) .43 7 Creating a manufacturers device profile without using a root device profile43 7.1 General .43 7.2 Manufacturers device profile header.44 7.2.1 General .44 7.2.2 Manufacturers device profile

28、ID (mandatory).44 7.2.3 Manufacturers device profile description (optional) .44 7.2.4 Manufacturers device profile version (mandatory).44 7.2.5 Manufacturers device profile release date (mandatory) .44 7.2.6 Manufacturer ID (mandatory).44 7.2.7 Model compatibility (optional) 44 7.2.8 Software compat

29、ibility (optional)44 7.2.9 Hardware compatibility (optional).44 7.2.10 Profile type (optional) 44 7.2.11 Profile availability (optional).44 7.2.12 Additional information (optional) 44 7.3 Root device profile header.45 7.3.1 Root device profile ID 45 7.3.2 Root device profile version 45 7.3.3 Root de

30、vice profile release date 45 7.3.4 Device description (optional) .45 7.4 Parameters (root device profile) 45 7.5 Parameters (manufacturer-specific).45 7.6 Complex data types (root device profile)45 7.7 Complex data types (manufacturer-specific) 45 7.8 Parameter assemblies (root device profile)45 7.9

31、 Parameter assemblies (manufacturer-specific) 45 7.10 Parameter groups (root device profile) 45 7.11 Parameter groups (manufacturer-specific).45 7.12 Functional elements (root device profile) .45 7.13 Functional elements (manufacturer-specific) .45 7.14 State model (root device profile)46 7.15 State

32、 model (manufacturer-specific) 46 7.16 Services (root device profile).46 7.17 Services (manufacturer-specific) .46 Annex A (normative) Device profile template47 Annex B (informative) Device profile examples 54 Annex C (informative) Profile creation guidelines .77 Annex D (informative) Profile exchan

33、ge language78 Annex E (informative) Categories of parameters 90 Annex ZA (normative) Normative references to international publications with theircorresponding European publications93BS EN 61915-1:2008 5 Figure 1 Relationship between IEC 61915-1 and device profiles 14 Figure 2 Array data type exampl

34、e 20 Figure 3 Structured data type example.21 Figure 4 Enumerated data type examples 23 Figure 5 Example description format (1).26 Figure 6 Example description format (2).26 Figure 7 Example description format (3).26 Figure 8 Example device structure .28 Figure 9 Combination motor starter example29

35、Figure 10 Example of a state chart diagram for a photoelectric switch .31 Figure 11 Example of a state chart diagram for a motor starter 32 Figure 12 State transition table for the photoelectric switch example33 Figure 13 State transition table for the motor starter example 34 Figure A.1 Device prof

36、ile template .53 Figure B.1 Example of a root device profile Photoelectric switch.58 Figure B.2 Example of a root device profile Motor starter 68 Figure B.3 Example of a generic device profile created using a root device profile.72 Figure B.4 Example of a specific device profile created without usin

37、g a root device profile .76 Figure C.1 Simple proximity switch parameter assembly 77 Figure C.2 Diagnostic proximity switch parameter assembly 77 Figure D.1 Overview of an ISO 15745 device profile 79 Figure D.2 Device profile schema structure89 Table 1 Valid simple data types .17 Table A.1 Contents

38、of the “Required” field in a device profile .47 Table D.1 Mapping for a root device profile (ProfileHeader) .79 Table D.2 Example mapping for a root device profile (ProfileBody) 80 Table D.3 Correspondence with ISO 15745 for a manufacturers device profile80 Table D.4 Example mapping for a manufactur

39、ers device profile (ProfileBody) .81 Bibliography92 BS EN 61915-1:2008 6 INTRODUCTION The purpose of this International Standard is to provide a framework within which IEC product committees can define profiles for devices within their scope. NOTE This framework follows the principles given in IEC/T

40、R 62390, the “Common automation device Profile guideline”, and refers to ISO 15745, “Industrial automation systems and integration Open systems application integration framework”. Profiles define a common set of functionality (data and behaviour) for a class of devices in a given industrial domain,

41、thus allowing system designers, system integrators and maintenance staff to handle profile-based devices without special tool configuration. Profiles also provide consistent structuring and semantics of device functionality. This part of IEC 61915 (Part 1) defines general rules for the development o

42、f device profiles for networked industrial devices, including recommendations of general interest and application, for example a documentation template and a profile exchange language. This will allow uniformity of profile structure throughout the different device types. IEC product committees may d

43、efine “root device profiles” for their devices, in which they will specify the amount of information which their products should make available through any network, using the general rules defined in this part of IEC 61915. This will facilitate uniformity of profiles throughout the corresponding fam

44、ily of devices. These root device profiles will be published in subsequent parts of the IEC 61915 series. This International Standard also gives manufacturers or other organizations a common framework to represent their network capable devices. Manufacturers or other organizations may use the root d

45、evice profiles specified by the IEC product committees for various device types as a basis for developing device profiles corresponding to their products, using the general rules defined in this part of IEC 61915 to add the required manufacturer-specific extensions. Alternatively, they may develop t

46、heir own device profiles using only the general rules. These manufacturers device profiles will typically be published within the product documentation. This International Standard facilitates the writing of network independent application software. BS EN 61915-1:2008 7 LOW-VOLTAGE SWITCHGEAR AND CO

47、NTROLGEAR DEVICE PROFILES FOR NETWORKED INDUSTRIAL DEVICES Part 1: General rules for the development of device profiles 1 Scope The IEC 61915 series is intended to improve interoperability of devices, network tools and application software. This part of IEC 61915 defines a framework for common repre

48、sentation of networked industrial devices and provides a template for documenting such a representation, independent of the network used. This framework follows the principles given in IEC/TR 62390, the “Common automation device Profile guideline”, and refers to ISO 15745, “Industrial automation sys

49、tems and integration Open systems application integration framework”. NOTE 1 The device profile format specified in this part of IEC 61915 is compatible with devices connected to both bit- and byte-oriented networks. This part of IEC 61915 applies to root device profiles, generic device profiles, and specific device profiles. The root device profiles will be published in subsequent parts of the IEC 61915 series. NOTE 2 This International St