ETSI EN 319 142-2-2016 Electronic Signatures and Infrastructures (ESI) PAdES digital signatures Part 2 Additional PAdES signatures profiles (V1 1 1)《电子签名和基础设施(ESI) PAdES数字签名 第2部分 附.pdf

《ETSI EN 319 142-2-2016 Electronic Signatures and Infrastructures (ESI) PAdES digital signatures Part 2 Additional PAdES signatures profiles (V1 1 1)《电子签名和基础设施(ESI) PAdES数字签名 第2部分 附.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 319 142-2-2016 Electronic Signatures and Infrastructures (ESI) PAdES digital signatures Part 2 Additional PAdES signatures profiles (V1 1 1)《电子签名和基础设施(ESI) PAdES数字签名 第2部分 附.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 319 142-2 V1.1.1 (2016-04) Electronic Signatures and Infrastructures (ESI); PAdES digital signatures; Part 2: Additional PAdES signatures profiles EUROPEAN STANDARD ETSI ETSI EN 319 142-2 V1.1.1 (2016-04) 2 Reference DEN/ESI-0019142-2 Keywords electronic signature, PAdES, profile, security

2、ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: ht

3、tp:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived

4、 difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision

5、or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSu

6、pportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written author

7、ization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE

8、are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 319 142-2 V1.1.1 (2016-04) 3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs te

9、rminology 5g3Introduction 5g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 8g33 Definitions and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 9g34 Profile for CMS digital signatures in PDF . 9g34.1 Features 9g34.2 Requirements of Profile for CMS Sign

10、atures in PDF 10g34.2.1 Requirements on PDF signatures 10g34.2.2 Requirements on PDF signature handlers . 10g34.2.3 Requirements on signature validation . 10g34.2.4 Requirements on Time Stamping 11g34.2.4.1 Requirements on electronic time-stamp creation 11g34.2.4.2 Requirements on electronic time-st

11、amp validation . 11g34.2.5 Requirements on revocation checking 11g34.2.6 Requirements on Seed Values 11g34.2.7 Requirements on encryption . 11g35 Extended PAdES signature profiles . 11g35.1 Features 11g35.2 General Requirements 11g35.2.1 Requirements from Part 1 . 11g35.2.2 Notation of Requirements

12、. 12g35.3 PAdES-E-BES Level 12g35.4 PAdES-E-EPES Level 14g35.5 PAdES-E-LTV Level . 14g36 Profiles for XAdES Signatures signing XML content in PDF . 14g36.1 Features 14g36.2 Profiles for XAdES signatures of signed XML documents embedded in PDF containers . 15g36.2.1 Overview 15g36.2.2 Profile for Bas

13、ic XAdES signatures of XML documents embedded in PDF containers 17g36.2.2.1 Features . 17g36.2.2.2 General syntax and requirements 17g36.2.2.3 Requirements for applications generating signed XML document to be embedded . 17g36.2.2.4 Mandatory operations 18g36.2.2.4.1 Protecting the signing certifica

14、te . 18g36.2.2.5 Requirements on XAdES optional properties . 18g36.2.2.6 Serial Signatures . 19g36.2.2.7 Parallel Signatures. 19g36.2.2.8 PAdES Signatures . 19g36.2.3 Profile for long-term XAdES signatures of signed XML documents embedded in PDF containers 19g36.2.3.1 Features . 19g36.2.3.2 Augmenta

15、tion mechanism . 19g36.2.3.3 Optional properties 19g36.2.3.4 Validation Process. 19g36.3 Profiles for XAdES signatures on XFA Forms 20g36.3.1 Overview 20g36.3.2 Profile for Basic XAdES signatures on XFA forms . 22g3ETSI ETSI EN 319 142-2 V1.1.1 (2016-04) 4 6.3.2.1 Features . 22g36.3.2.2 General synt

16、ax and requirements 22g36.3.2.3 Mandatory operations 23g36.3.2.3.1 Protecting the signing certificate . 23g36.3.2.4 Requirements on XAdES optional properties . 23g36.3.2.5 Serial Signatures . 24g36.3.2.6 Parallel Signatures. 25g36.3.3 Profile for long-term validation XAdES signatures on XFA forms 25

17、g36.3.3.1 Overview . 25g36.3.3.2 Features . 25g36.3.3.3 General Requirements . 25g36.3.4 Extensions Dictionary . 25g3Annex A (informative): General Features 26g3A.1 PDF signatures . 26g3A.2 PDF Signature types . 27g3A.3 PDF Signature Handlers . 27g3A.4 PDF serial signatures 27g3A.5 PDF signature Val

18、idation and Time-stamping . 28g3A.6 ISO 19005-1: 2005 (PDF/A-1) . 28g3A.7 ISO 19005-2:2011 (PDF/A-2) 29g3A.8 Seed Values and Signature Policies . 29g3History 30g3ETSI ETSI EN 319 142-2 V1.1.1 (2016-04) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may

19、 have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI st

20、andards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not

21、 referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and Infrastructures (ESI). The present document is p

22、art 2 of a multi-part deliverable covering the PDF digital signatures (PAdES). Full details of the entire series can be found in part 1 4. National transposition dates Date of adoption of this EN: 1 April 2016 Date of latest announcement of this EN (doa): 31 July 2016 Date of latest publication of n

23、ew National Standard or endorsement of this EN (dop/e): 31 January 2017 Date of withdrawal of any conflicting National Standard (dow): 31 January 2017 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “canno

24、t“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction Electronic commerce has emerged as a frequent way of doing busi

25、ness between companies across local, wide area and global networks. Trust in this way of doing business is essential for the success and continued development of electronic commerce. It is therefore important that companies using this electronic means of doing business have suitable security control

26、s and mechanisms in place to protect their transactions and to ensure trust and confidence with their business partners. In this respect digital signatures are an important security component that can be used to protect information and provide trust in electronic business. The present document is in

27、tended to cover digital signatures supported by PKI and public key certificates. This includes evidence as to its validity even if the signer or verifying party later attempts to deny (i.e. repudiates; see ISO/IEC 10181-4 i.1) the validity of the signature. ETSI ETSI EN 319 142-2 V1.1.1 (2016-04) 6

28、Thus, the present document can be used for any document encoded in a portable document format (PDF) produced by an individual and a company, and exchanged between companies, between an individual and a governmental body, etc. The present document is independent of any environment; it can be applied

29、to any environment, e.g. smart cards, SIM cards, special programs for digital signatures, etc. The present document is part of a rationalized framework of standards (see ETSI TR 119 000 i.8). See ETSI TR 119 100 i.9 for getting guidance on how to use the present document within the aforementioned fr

30、amework. ETSI ETSI EN 319 142-2 V1.1.1 (2016-04) 7 1 Scope The present document defines multiple profiles for PAdES digital signatures which are digital signatures embedded within a PDF file. The present document contains a profile for the use of PDF signatures, as described in ISO 32000-1 1 and bas

31、ed on CMS digital signatures i.6, that enables greater interoperability for PDF signatures by providing additional restrictions beyond those of ISO 32000-1 1. This first profile is not related to ETSI EN 319 142-1 4. The present document also contains a second set of profiles that extend the scope o

32、f the profile in PAdES part 1 5, while keeping some features that enhance interoperability of PAdES signatures. These profiles define three levels of PAdES extended signatures addressing incremental requirements to maintain the validity of the signatures over the long term, in a way that a certain l

33、evel always addresses all the requirements addressed at levels that are below it. These PAdES extended signatures offer a higher degree of optionality than the PAdES baseline signatures specified in ETSI EN 319 142-1 4. The present document also defines a third profile for usage of an arbitrary XML

34、document signed with XAdES signatures that is embedded within a PDF file. The profiles defined in the present document provide equivalent requirements to profiles found in ETSI TS 102 778 i.10. Procedures for creation, augmentation, and validation of PAdES digital signatures are out of scope and spe

35、cified in ETSI EN 319 102-1 i.11. Guidance on creation, augmentation and validation of PAdES digital signatures including the usage of the different attributes is provided in ETSI TR 119 100 i.9. The present document does not repeat the base requirements of the referenced standards, but instead aims

36、 to maximize interoperability of digital signatures in various business areas. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. Fo

37、r non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this claus

38、e were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ISO 32000-1: “Document management - Portable document format - Part 1: PDF 1.7“. NOTE: Available at http:/ 2 IETF R

39、FC 2315: “PKCS #7: Cryptographic Message Syntax Version 1.5“. 3 IETF RFC 5280: “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile“. 4 ETSI EN 319 142-1: “Electronic Signatures and Infrastructures (ESI); PAdES digital signatures; Part 1: Building block

40、s and PAdES baseline signatures“. 5 ETSI EN 319 122-1: “Electronic Signatures and Infrastructures (ESI); CAdES digital signatures; Part 1: Building blocks and CAdES baseline signatures“. 6 ETSI EN 319 132-1: “Electronic Signatures and Infrastructures (ESI); XAdES digital signatures; Part 1: Building

41、 blocks and XAdES baseline signatures“. ETSI ETSI EN 319 142-2 V1.1.1 (2016-04) 8 7 ETSI EN 319 132-2: “Electronic Signatures and Infrastructures (ESI); XAdES digital signatures; Part 2: Extended XAdES signatures“. 8 Adobe XFA: “XML Forms Architecture (XFA) Specification“ version 2.5, (June 2007), A

42、dobe Systems Incorporated“. 9 W3C Recommendation: “XML-Signature Syntax and Processing. Version 1.1“. 10 IETF RFC 5035 (2007): “Enhanced Security Services (ESS) Update: Adding CertID Algorithm Agility“. 11 IETF RFC 3161 (2001): “Internet X.509 Public Key Infrastructure Time-Stamp Protocol (TSP)“. 12

43、 IETF RFC 5816 (2010): “ESSCertIDv2 Update for RFC 3161“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the l

44、atest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the prese

45、nt document but they assist the user with regard to a particular subject area. i.1 ISO/IEC 10181-4: “Information technology - Open Systems Interconnection - Security frameworks for open systems: Non-repudiation framework“. i.2 ETSI TS 119 312: “Electronic Signatures and Infrastructures (ESI); Crypto

46、graphic Suites“. i.3 IETF RFC 5755: “An Internet Attribute Certificate Profile for Authorization“. i.4 W3C Working Group Note, XML Signature Best Practices, 11 April 2013. i.5 ISO 19005-1:2005: “Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4

47、 (PDF/A-1)“. i.6 IETF RFC 5652 (2009): “Cryptographic Message Syntax (CMS)“. i.7 ISO 19005-2 (2011): “Document management - Electronic document file format for long-term preservation - Part 2: Use of ISO 32000-1 (PDF/A-2)“. i.8 ETSI TR 119 000: “Electronic Signatures and Infrastructures (ESI); The f

48、ramework for standardization of signatures: overview“. i.9 ETSI TR 119 100: “Electronic Signatures and Infrastructures (ESI); Business Driven Guidance for Signature Creation and Validation“. i.10 ETSI TS 102 778: “Electronic Signatures and Infrastructures (ESI); PDF Advanced Electronic Signature Pro

49、files; CMS Profile based on ISO 32000-1“. i.11 ETSI EN 319 102-1: “Electronic Signatures and Infrastructures (ESI); Procedures for Creation and Validation of AdES Digital Signatures; Part 1: Creation and Validation“. i.12 ETSI TR 119 001: “Electronic Signatures and Infrastructures (ESI); The framework for standardization of signatures; Definitions and abbreviations“. ETSI ETSI EN 319 142-2 V1.1.1 (2016-04) 9 3 Definitions and abbreviations 3.1 Defi