EN 61000-6-4-2007 en Electromagnetic compatibility (EMC) - Part 6-4 Generic standards - Emission standard for industrial environments (Incorporates Amendment A1 2011)《电磁兼容性 第6-4部分 .pdf

《EN 61000-6-4-2007 en Electromagnetic compatibility (EMC) - Part 6-4 Generic standards - Emission standard for industrial environments (Incorporates Amendment A1 2011)《电磁兼容性 第6-4部分 .pdf》由会员分享，可在线阅读，更多相关《EN 61000-6-4-2007 en Electromagnetic compatibility (EMC) - Part 6-4 Generic standards - Emission standard for industrial environments (Incorporates Amendment A1 2011)《电磁兼容性 第6-4部分 .pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61000-6-4:2007 Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments ICS 33.100.10 +A1:2011 National foreword This British Standard is the UK implementation of EN 61000-6-4:2007+A1:2011. It is identical with IEC 61000-6-4

2、:2006, incorporating amendment 1:2011. It supersedes BS EN 61000-6-4:2007, which will be withdrawn on 1 January 2014. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the amendment. For example,

3、text altered by IEC amendment 1 is indicated in the text by !“. The UK participation in its preparation was entrusted by Technical Committee GEL/210, EMC Policy committee, to Subcommittee GEL/210/12, EMC Basic and generic standards. A list of organizations represented on GEL/210/12 can be obtained o

4、n request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 61000-6-4:2007+A1:2011 Amendments/corrigenda

5、 issued since publication Date Comments 30 June 2011 Implementation of IEC amendment 1:2011 with CENELEC endorsement A1:2011. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2007 BSI 2011 ISBN 978 0 580 69862 0 EUROPEAN STANDARD E

6、N 61000-6-4 NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: 2011 CENELEC - All rights of exploitation in any form and by any means res

7、erved worldwide for CENELEC members. Ref. No. EN 61000-6-4:2007 E ICS 33.100.10 Supersedes EN 61000-6-4:2001English version Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments (IEC 61000-6-4:2006) Compatibilit lectromagntique (CEM) - Part

8、ie 6-4: Normes gnriques - Norme sur lmission pour les environnements industriels (CEI 61000-6-4:2006) Elektromagnetische Vertrglichkeit (EMV) - Teil 6-4: Fachgrundnormen - Straussendung fr Industriebereiche (IEC 61000-6-4:2006) This European Standard was approved by CENELEC on 2006-12-01. CENELEC me

9、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

10、tion to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat

11、 has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Nethe

12、rlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Avenue Marnix 17, B - 1000 Brussels:2007+A1 February 2011 Foreword The text of document CISPR/H/122/FDIS, future edition 2 of IEC 61000-6-4, prepared by CISPR SC H, Limits for the protec

13、tion of radio services, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61000-6-4 on 2006-12-01. This European Standard supersedes EN 61000-6-4:2001. The major changes in EN 61000-6-4:2007 are the inclusion of a clause on tests for equipment in series production, a n

14、ew clause on measurement uncertainty and the inclusion of requirements on telecommunications ports. The informative annex has been deleted. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endor

15、sement (dop) 2007-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-12-01 This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirem

16、ents of EC Directives EMC (89/336/EEC), EMC (2004/108/EC) and RTTED (1999/5/EC). See Annex ZZ. Annexes ZA and ZZ have been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61000-6-4:2006 was approved by CENELEC as a European Standard without any modification. _ Forew

17、ord to amendment A1 The text of document CISPR/H/205/FDIS, future amendment 1 to IEC 61000-6-4:2006, prepared by CISPR SC H, Limits for the protection of radio services, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 61000-6-4:2007 on 2011-01-01. Att

18、ention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the amendment has to be implemented at

19、national level by publication of an identical national standard or by endorsement (dop) 2011-10-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2014-01-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of amendment 1:2010 to

20、 the International Standard IEC 61000-6-4:2006 was approved by CENELEC as an amendment to the European Standard without any modification. _ BS EN 61000-6-4:2007+A1:2011 EN 61000-6-4:2007+A1:2011 (E) 2 CONTENTS INTRODUCTION.4 1 Scopeandobj ect5 2 Normativere ferences6 3 7 4 Conditionsduri ngtesting.8

21、 5 Productdocumentation .9 6 Applicability 9 7 Emissionrequirements .9 8 9 9 9 Bibliography1 Figure 1 7 Table1 11 AnnexZA(normative) Normativereferencestointernationalpublicationswiththeir correspondingEuropeanpublications16AnnexZZ(informative)CoverageofEssentialRequirementsofECDirectives .18 Terms,

22、 definitions and abbreviations Measurement uncertainty Application of limits and tests for conformity of equipment in series production Compliance with this standard Emission test requirements 10 11 10Emission Enclosure port Table 2 - Emission Low voltage AC mains port 13 Table 3 Emission Telecommun

23、ications/network port .1 Ports covered by Tables 1 to 3 BS EN 61000-6-4:2007+A1:2011 EN 61000-6-4:2007+A1:2011 (E) 3 11 5 4 ! “ ! “ ! “ ! “ ! “ ! “ INTRODUCTION IEC 61000 is published in separate parts according to the following structure: Part 1: General General considerations (introduction, fundam

24、ental principles) Definitions, terminology Part 2: Environment Description of the environment Classification of the environment Compatibility levels Part 3: Limits Emission limits Immunity limits (insofar as they do not fall under the responsibility of the product committees) Part 4: Testing and mea

25、surement techniques Measurement techniques Testing techniques Part 5: Installation and mitigation guidelines Installation guidelines Mitigation methods and devices Part 6: Generic standards Part 9: Miscellaneous Each part is further subdivided into several parts published either as International Sta

26、ndards or technical reports/specifications, some of which have already been published as sections. Others will be published with the part number followed by a dash and a second number identifying the subdivision (example: 61000-6-1). BS EN 61000-6-4:2007+A1:2011 EN 61000-6-4:2007+A1:2011 (E) 4 ELECT

27、ROMAGNETIC COMPATIBILITY (EMC) Part 6-4: Generic standards Emission standard for industrial environments 1 Scope and object This part of IEC 61000 for EMC emission requirements applies to electrical and electronic apparatus intended for use in industrial environments as described below. Emission req

28、uirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified. This generic EMC emission standard is applicable if no relevant dedicated product or product- family EMC emission standard exists. This standard applie

29、s to a apparatus intended to be connected to a power network supplied from a high or medium voltage transformer dedicated to the supply of an installation feeding manufacturing or similar plant, and intended to operate in or in proximity to industrial locations, as described below. This standard app

30、lies also to apparatus, which is battery operated and intended to be used in industrial locations. The environments encompassed by this standard are industrial, both indoor and outdoor. Industrial locations are in addition characterised by the existence of one or more of the following examples: indu

31、strial, scientific and medical (ISM) 1) ) apparatus; heavy inductive or capacitive loads that are frequently switched; high currents and associated magnetic fields. The object of this standard is to define the emission test requirements for apparatus defined in the scope in relation to continuous an

32、d transient, conducted and radiated disturbances. The emission requirements have been selected so as to ensure that disturbances generated by apparatus operating normally in industrial locations do not exceed a level that could prevent other apparatus from operating as intended. Fault conditions of

33、apparatus are not taken into account. Not all disturbance phenomena have been included for testing purposes in this standard but only those considered as relevant for the equipment covered by this standard. These requirements represent essential electromagnetic compatibility emission requirements. R

34、equirements are specified for each port considered. NOTE 1 Safety considerations are not covered by this standard. NOTE 2 In special cases, situations will arise where the levels specified in this standard will not offer adequate protection; for example where a sensitive receiver is used in close pr

35、oximity to an apparatus. In these instances, special mitigation measures may have to be employed. _ 1)As defined in CISPR 11. BS EN 61000-6-4:2007+A1:2011 EN 61000-6-4:2007+A1:2011 (E) 5 2 Normative references The following referenced documents are indispensable for the application of this document.

36、 For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CISPR 16-1-2:2003, Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunit

37、y measuring apparatus Ancillary equipment Conducted disturbances IEC 60050-161, International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility IEC 61000-4-20:2010, Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques Emission and immunity testing

38、in transverse electromagnetic (TEM) waveguide CISPR 11:2009, Industrial, scientific and medical equipment Radio-frequency disturbance characteristics Limits and methods of measurement CISPR 14-1:2005, Electromagnetic compatibility Requirements for household appliances, electric tools and similar app

39、aratus Part 1: Emission Amendment 1:2008 CISPR 16-1-1:2010, Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus CISPR 16-1-4:2007, Specification for radio disturbance and immunity measurin

40、g apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus Ancillary equipment Radiated disturbances Amendment 1:2007 CISPR 16-2-1:2008, Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and imm

41、unity Conducted disturbance measurements CISPR 16-2-3:2006, Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of disturbances and immunity Radiated disturbance measurements CISPR 16-4-2:2003, Specification for radio disturbance and immu

42、nity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling Uncertainty in EMC measurements CISPR 22:2008, Information technology equipment Radio disturbance characteristics Limits and methods of measurement ! “ ! “ BS EN 61000-6-4:2007+A1:2011 EN 61000-6-4:2007+A1:2

43、011 (E) 6 3.1.1 port particular interface of the specified apparatus with the external electromagnetic environment (see Figure 1) 3 Terms, definitions and abbreviations For the purposes of this document, the terms and definitions given in IEC 60050-161, as well as the following apply. ! 3.1 Terms an

44、d definitionsEnclosure port Telecommunications/ network port Low voltage a.c. mains port Apparatus Figure 1 Ports covered by Tables 1 to 3 IEC 2581/10 3.1.2 enclosure port physical boundary of the apparatus which electromagnetic fields may radiate through or impinge on 3.1.3 cable port port at which

45、 a conductor or a cable is connected to the apparatus NOTE Examples are signal, control and power ports. 3.1.4 telecommunications/network port point of connection for voice, data and signalling transfers intended to interconnect widely dispersed systems via such means as direct connection to multi-u

46、ser telecommunications networks (e.g. public switched telecommunications networks (PSTN) integrated services digital networks (ISDN), x-type digital subscriber lines (xDSL), etc.), local area networks (e.g. Ethernet, Token Ring, etc.) and similar networks) NOTE A port generally intended for intercon

47、nection of components of an ITE system under test (e.g. RS-232,RS- 485, field buses in the scope of IEC 61158, IEEE Standard 1284 (parallel printer), Universal Serial Bus (USB), IEEE Standard 1394 (“Fire Wire”), etc.) and used in accordance with its functional specifications (e.g. for the maximum le

48、ngth of cable connected to it), is not considered to be a telecommunications port. 3.1.5 power port port at which a conductor or cable carrying the primary electrical power needed for the operation (functioning) of an apparatus or associated apparatus is connected to the apparatus 3. 6 public mains network electricity lines to which all categories of consumers have access and which are operated by a supply or distribution undertaking for the purpose of supplying electrical energy 1. BS EN 61000-6-4:2007+A1:2011 EN 61000-6-4:2007+A1:2011 (E) 7 “ 3.1.7 low voltage LV low tens