EN 581-3-2007 6363 Outdoor Furniture - Seating and Tables for Camping Domestic and Contract Use - Part 3 Mechanical Safety Requirements and Test Methods for Tables《户外家具 野营 家用和订做的座椅.pdf

《EN 581-3-2007 6363 Outdoor Furniture - Seating and Tables for Camping Domestic and Contract Use - Part 3 Mechanical Safety Requirements and Test Methods for Tables《户外家具 野营 家用和订做的座椅.pdf》由会员分享，可在线阅读，更多相关《EN 581-3-2007 6363 Outdoor Furniture - Seating and Tables for Camping Domestic and Contract Use - Part 3 Mechanical Safety Requirements and Test Methods for Tables《户外家具 野营 家用和订做的座椅.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 581-3:2007Outdoor furniture Seating and tables for camping, domestic and contract use Part 3: Mechanical safety requirements and test methods for tablesThe European Standard EN 581-3:2007 has the status of a British StandardICS 97.140; 97.200.30g49g50g3g38g50g51g60g44g49g42g3g5

2、8g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 581-3:2007This British Standard was

3、published under the authority of the Standards Policy and Strategy Committee on 31 May 2007 BSI 2007ISBN 978 0 580 50713 7National forewordThis British Standard was published by BSI. It is the UK implementation of EN 581-3:2007. It supersedes BS EN 581-3:1999 which is withdrawn.The UK participation

4、in its preparation was entrusted to Technical Committee FW/0, Furniture.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct app

5、lication.Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 581-3April

6、2007ICS 97.140; 97.200.30 Supersedes EN 581-3:1999 English VersionOutdoor furniture - Seating and tables for camping, domesticand contract use - Part 3: Mechanical safety requirements andtest methods for tablesMobilier dextrieur - Sige et tables usages domestique,collectif et de camping - Partie 3:

7、Exigences et essais descurit mcanique des tablesAuenmbel - Sitzmbel und Tische fr Camping-, Wohn-und Objektbereich - Teil 3: MechanischeSicherheitsanforderungen und Prfverfahren fr TischeThis European Standard was approved by CEN on 15 March 2007.CEN members are bound to comply with the CEN/CENELEC

8、Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN m

9、ember.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN member

10、s are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Swit

11、zerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN

12、581-3:2007: ELicensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 General test conditions.4 5 Test equipment 5 5.1 General5 5.2 Floor 5 5.3 Steel test tub

13、e 5 6 Test methods and requirements 5 6.1 General5 6.2 Stability .5 6.2.1 Stability test under vertical load 5 6.2.2 Tables where the structure is intended to support a parasol. 7 6.3 Vertical static load test7 6.3.1 Vertical static load on the table top .7 6.3.2 Vertical static load test on end ext

14、ensions.9 6.4 Horizontal fatigue test .9 6.5 Test sequence and test parameters.13 7 Instruction for use .13 8 Test report 14 Annex A (informative) Purchase information (Guidelines) .15 Annex B (informative) Significant technical changes in revised edition of this standard 16 Licensed Copy: Wang Bin,

15、 na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 3 Foreword This document (EN 581-3:2007) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national stand

16、ard, either by publication of an identical text or by endorsement, at the latest by October 2007, and conflicting national standards shall be withdrawn at the latest by October 2007. This document supersedes EN 581-3:1999. Informative Annex B provides details of significant technical changes between

17、 this European Standard and the previous edition. This document consists of following parts with the general title, Outdoor furniture Seating and tables for camping, domestic and contract use: Part 1: General safety requirements Part 2 (ENV): Mechanical safety requirements and test methods for sampl

18、ing Part 4: (CEN/TR) Requirements and test methods for durability under the influence of climatic conditions According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, C

19、yprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Thu Aug 0

20、9 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 4 1 Scope This European Standard specifies the mechanical safety requirements and test methods for outdoor tables used by adults for camping, domestic and contract use without regard to materials, design/construction or manufactu

21、ring processes. This document does not apply to outdoor furniture for severe contract use where higher requirements may be necessary, nor does it apply to street furniture and furniture permanently fixed to the ground/wall. Annex A (informative) specifies guidelines for purchase information. Informa

22、tion regarding ageing and degradation caused by light, temperature and moisture has not been included. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the l

23、atest edition of the referenced document (including any amendments) applies. EN 581-1, Outdoor furniture Seating and tables for camping, domestic and contract use Part 1: General safety requirements EN 1730, Domestic furniture Tables Test methods for determination of strength, durability and stabili

24、ty 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 outdoor tables for contract use outdoor tables intended for non-private use in places with public access such as restaurants, open-air swimming pools, beaches and vocational and leisure sites

25、 3.2 outdoor tables for domestic use outdoor tables intended for private use in places without public access such as gardens, winter gardens, terraces, balconies etc 3.3 outdoor tables for camping use outdoor tables, foldable or knock-down and light-weight, intended for use in connection with campin

26、g and travelling 4 General test conditions The general test conditions shall be as specified in EN 1730 with the exception of the conditioning time, which shall be at least 24 h, instead of 1 week. The tests are described in terms of the application of forces. Masses, however, can be used. The relat

27、ionship 10 N = 1 kg shall be used for this purpose. Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 5 5 Test equipment 5.1 General The test equipment shall be as in EN 1730 with the exception of the floor which shall be as specified in 5.2

28、. 5.2 Floor Horizontal, flat and rigid with a smooth surface. NOTE Examples of suitable floors: Plastics laminate, Bakelite board and steel. 5.3 Steel test tube A steel tube, 18 mm in diameter and a 1,5 mm wall thickness with a length that allows a force to be applied from 2 200 mm above the floor.

29、6 Test methods and requirements 6.1 General The general safety requirements stated in EN 581-1 shall be fulfilled. The table shall not overturn when tested according to clause 6.2. At the end of each test specified in clause 6.3 and clause 6.4, there shall be no structural damage or other deteriorat

30、ion that affects safety, and the table shall fulfil its functions (i.e. folding, unfolding, adjustments, operation of extensions etc). 6.2 Stability 6.2.1 Stability test under vertical load Measure the largest dimension of the table top. NOTE 1 For rectangular tables, the largest dimension to consid

31、er is the length. The diagonal is not to consider as a dimension in this case. Using this dimension, determine the force F, as follows (see also Figure 2): Camping use: F = 200 Domestic use: For L smaller than 800 mm F = 200 N For L between 800 mm and 1600 mm F = L/4 N For L larger than 1 600 mm F =

32、 400 N Contract use: For L smaller than 800 mm F = 200 N For L between 800 mm and 1 000 mm F = L-600 N For L larger than 1 000 mm F = 400 N If the table is fitted with drawers, these shall not be loaded during this test. Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled C

33、opy, (c) BSIEN 581-3:2007 (E) 6 The vertical force F shall be applied to the side where the load is most likely to cause overturning, as far away from the supports as possible, and at a point 50 mm from the outer edge of the table top (see Figure 1). NOTE 2 Reference is made to EN 14749 for addition

34、al test methods for tables with storage capability. Dimensions in millimetres Figure 1 Stability under vertical load Key 1 Contract X L or (mm) 2 Domestic Y F1(N) 3 Camping Figure 2 Determination of the vertical stability force F Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncon

35、trolled Copy, (c) BSIEN 581-3:2007 (E) 7 6.2.2 Tables where the structure is intended to support a parasol. This test only applies to tables that do not require parasols to be used with their own bases. Secure the steel test tube (5.3) in the tables fixture for holding parasols. Apply a horizontal f

36、orce F of 30 N at a height h of 2 200 mm (see Figure 3). Figure 3 shows an example of a table where the structure is intended to support a parasol. Key F horizontal force h height Figure 3 Stability of tables where the structure is intended to support a parasol 6.3 Vertical static load test 6.3.1 Ve

37、rtical static load on the table top Place the table on the floor (5.2) in normal position of use. Apply, according to EN 1730, the force(s) F, specified in Table 1, at the following application point(s): for a table top length L 1 600 mm, at the geometric centre of the table (see Figure 4), for a ta

38、ble top length L 1 600 mm, at 2 points positioned on the longitudinal axis of the table top with 400 mm on either side of the transversal axis (see Figure 5), Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 8 for table tops with central ex

39、tension(s), assemble the extension(s), and apply the force(s) at 1 or 2 point(s) as specified above. NOTE If necessary, a foam layer may be used between the loading pad and the test surface. Carry out for the number of cycles specified in Table 1, with 5 s to 10 s between applications. Figure 4 Stre

40、ngth of table tops, length L 1600mm Dimensions in millimetres Figure 5 Strength of table tops, length L 1600 mm Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 9 6.3.2 Vertical static load test on end extensions Place the table on the floo

41、r (5.2) in normal position of use. Load the table top with an evenly distributed load sufficient to prevent overturning during the test. In the extended configuration, apply a force F, 100 mm from the outer edge of the table top, at the middle of the width (see Figure 6). NOTE If necessary, a foam l

42、ayer may be used between the loading pad and the test surface. Carry out for the number of cycles specified in Table 1, with 5 s to 10 s between applications. Figure 6 Strength of end extensions 6.4 Horizontal fatigue test Restrain the base of the table by placing stops around each leg/base (in all

43、directions). Place a mass M, specified in Table 1, at the geometric centre of the table top so that the table remains horizontal during testing. Apply two alternating horizontal forces, specified in Table 1, using, e.g. masses, string and pulley, at the height of the top surface by means of two load

44、ing pads. These should be applied to the application points specified in Figure 7. The test may be carried out in a one stage cycle a, c, b, d or in a two stage cycle a, b followed by c, d. If the table tends to tilt in one direction of loading at a load less than that specified, reduce the horizont

45、al force until tilting is just prevented in that direction only. Carry out the test using this reduced force in that direction only. Record the value of any reduced force used. Carry out the test for the number of cycles specified in Table 1. Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:0

46、0 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 10 Dimensions in millimetres a) Example: Square and rectangular table tops Dimensions in millimetres b) Example: Oval, round or half-round table tops Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-

47、3:2007 (E) 11 Dimensions in millimetres Key 1 Leg c) Example: Round table tops with 3 or 4 legs Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 12 Dimensions in millimetres Key 1 Leg 2 Rail d) Example: Round table tops with 4 legs linked 2

48、 x 2 Figure 7 Horizontal fatigue test Licensed Copy: Wang Bin, na, Thu Aug 09 02:42:55 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 581-3:2007 (E) 13 6.5 Test sequence and test parameters Table 1 Test sequence and test parameters Test parameters Test sequence ReferenceCamping Domestic Contract1 Vert

49、ical static load test on the table top 6.3.1 Load: 9 x 30 s + 1 x 30 min 500 N 750 N 1 000 N2 Vertical static load test on end extensions 6.3.2 Load: 9 x 30 s + 1 x 30 min 100 N 200 N 350 N M (kg) Up to 50 Up to 50 Up to 75F 100 N 150 N 150 N 3 Horizontal fatigue test 6.4 Number of cycles N 5 000 10 000 20 000 F for L smaller than 800 mm 200 N 200N 200 N F for L between 800 mm and 1 000 mm 200 N L / 4 L-600 F for L larger than 1 000 mm 200 N L / 4 400 N 4 Stability under vertical loada 6.2.1 F for L larger than 1