EN 1466-2014 en Child use and care articles - Carry cots and stands - Safety requirements and test methods (Incorporating corrigendum May 2015)《儿童用品和安抚用品 携带式吊床和支架 安全要求和试验方法》.pdf

《EN 1466-2014 en Child use and care articles - Carry cots and stands - Safety requirements and test methods (Incorporating corrigendum May 2015)《儿童用品和安抚用品 携带式吊床和支架 安全要求和试验方法》.pdf》由会员分享，可在线阅读，更多相关《EN 1466-2014 en Child use and care articles - Carry cots and stands - Safety requirements and test methods (Incorporating corrigendum May 2015)《儿童用品和安抚用品 携带式吊床和支架 安全要求和试验方法》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 1466:2014Child use and care articles Carry cots and stands Safetyrequirements and test methodsBS EN 1466:2014Incorporating corrigendum May 2015BS EN 1466:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1466:2014, incorporating

2、 corrigendum May 2015. It supersedes BS EN 1466:2004+A1:2007 which is withdrawn.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by CEN corrigendum May 2015 is indicated in the text by .The UK participation in its preparation was entrus

3、ted to Technical Committee CW/1, Safety of child use and child care products.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correc

4、t application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 90623 7ICS 97.190Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy

5、Committee on 30 November 2014.Amendments/corrigenda issued since publicationDate Text affected30 June 2015 Implementation of CEN corrigendum May 2015EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORM EN 1466 November 2014 ICS 97.190 Supersedes EN 1466:2004+A1:2007English Version Child use and care arti

6、cles - Carry cots and stands - Safetyrequirements and test methods Articles de puriculture - Couffins et supports - Exigencesde scurit et mthodes dessai Artikel fr Suglinge und Kleinkinder - Tragetaschen undStnder - Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was appr

7、oved by CEN on 9 August 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalst

8、andards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and

9、notified to the CEN-CENELEC Management Centre has the samestatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

10、Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and UnitedKingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Mana

11、gement Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members. Ref. No. EN 1466:2014 EIncorporating corrigendum May 2015BS EN 1466:2014Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms an

12、d definitions .5 4 General requirements and test conditions (see C.3) .5 4.1 General 5 4.2 Conditioning .5 4.3 Accuracy of test equipment 6 4.4 Determination of a protected volume 6 5 Test equipment 6 5.1 Test plate 6 5.2 Test mass .7 5.3 Test probes .7 5.4 Small parts cylinder .9 5.5 Test bar A .9

13、5.6 Test bar B .9 5.7 Datum board .9 5.8 Metal hooks . 10 5.9 Apparatus for dynamic strength test 11 6 Material hazard 11 6.1 Hazards due to organic materials . 11 6.2 Chemical hazards . 11 6.3 Thermal hazards . 12 7 Mechanical hazard 12 7.1 Protective function . 12 7.1.1 General . 12 7.1.2 Internal

14、 height of carry cot and effectiveness of retaining function (see C.4) . 12 7.1.3 Castors/wheels of stands 16 7.1.4 Carry cots with restraint system . 16 7.2 Entrapment hazards . 16 7.2.1 Requirements 16 7.2.2 Test method . 16 7.3 Hazard from moving parts (see C.5) . 17 7.4 Entanglement hazards . 17

15、 7.4.1 Requirements 17 7.4.2 Test for cords, straps and ribbons . 17 7.4.3 Test for loops 18 7.5 Choking and ingestion hazards 18 7.5.1 Requirements 18 7.5.2 Test methods for small parts . 19 7.6 Suffocation hazards 19 7.6.1 Plastic internal lining 19 7.6.2 Plastic packaging 19 7.6.3 Filling materia

16、ls . 20 7.7 Hazards edges, point and corners 20 7.8 Stability 20 BS EN 1466:2014 EN 1466:2014 (E)BS EN 1466:2014Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 General requirements and test conditions (see C.3) .5 4.1 General 5 4.2 Conditioning .5 4.3 Accurac

17、y of test equipment 6 4.4 Determination of a protected volume 6 5 Test equipment 6 5.1 Test plate 6 5.2 Test mass .7 5.3 Test probes .7 5.4 Small parts cylinder .9 5.5 Test bar A .9 5.6 Test bar B .9 5.7 Datum board .9 5.8 Metal hooks . 10 5.9 Apparatus for dynamic strength test 11 6 Material hazard

18、 11 6.1 Hazards due to organic materials . 11 6.2 Chemical hazards . 11 6.3 Thermal hazards . 12 7 Mechanical hazard 12 7.1 Protective function . 12 7.1.1 General . 12 7.1.2 Internal height of carry cot and effectiveness of retaining function (see C.4) . 12 7.1.3 Castors/wheels of stands 16 7.1.4 Ca

19、rry cots with restraint system . 16 7.2 Entrapment hazards . 16 7.2.1 Requirements 16 7.2.2 Test method . 16 7.3 Hazard from moving parts (see C.5) . 17 7.4 Entanglement hazards . 17 7.4.1 Requirements 17 7.4.2 Test for cords, straps and ribbons . 17 7.4.3 Test for loops 18 7.5 Choking and ingestion

20、 hazards 18 7.5.1 Requirements 18 7.5.2 Test methods for small parts . 19 7.6 Suffocation hazards 19 7.6.1 Plastic internal lining 19 7.6.2 Plastic packaging 19 7.6.3 Filling materials . 20 7.7 Hazards edges, point and corners 20 7.8 Stability 20 BS EN 1466:2014 EN 1466:2014 (E)BS EN 1466:20147.8.1

21、Stability of carry cots (see C.6) 20 7.8.2 Longitudinal stability of carry cots 21 7.8.3 Stability of stands and retention of carry cot on the stand 22 7.9 Structural integrity 22 7.9.1 Flexible handles of carry cots 22 7.9.2 Strength of carry cots . 23 7.9.3 Strength of stands . 24 7.9.4 Folding me

22、chanisms of stands 25 8 Durability of marking . 25 9 Product information 25 9.1 General . 25 9.2 Purchase information 26 9.2.1 General . 26 9.2.2 Carry cots . 26 9.2.3 Stands . 26 9.3 Markings . 26 9.4 Instructions for use and maintenance 26 9.4.1 General . 26 9.4.2 Carry cots . 27 9.4.3 Stands . 28

23、 Annex A (informative) Warnings 29 Annex B (informative) A-deviation 38 Annex C (informative) Rationales 39 C.1 Introduction 39 C.2 Scope 39 C.3 General . 39 C.4 Internal height of carry cot and effectiveness of retaining function 39 C.5 Hazard from moving parts 40 C.6 Stability of carry cots 40 Bib

24、liography 41 BS EN 1466:2014 EN 1466:2014 (E)BS EN 1466:2014Foreword This document (EN 1466:2014) has been prepared by Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, eit

25、her by publication of an identical text or by endorsement, at the latest by May 2015 and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or

26、CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1466:2004+A1:2007. In comparison with EN 1466:2004+A1:2007, the significant technical changes relate to the following issues: determination of a protected volume, clarification and updati

27、ng of: the Scope, internal height of rigid carry cots, entanglement hazards (test for cords, straps and ribbons), test methods for small part, Figures 6 and 10, rewriting of the standard following the current hazard based format, introduction of requirement for carry cots with restraint system. This

28、 document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belg

29、ium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switze

30、rland, Turkey and the United Kingdom. BS EN 1466:2014 EN 1466:2014 (E)BS EN 1466:2014Foreword This document (EN 1466:2014) has been prepared by Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of

31、 a national standard, either by publication of an identical text or by endorsement, at the latest by May 2015 and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of p

32、atent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1466:2004+A1:2007. In comparison with EN 1466:2004+A1:2007, the significant technical changes relate to the following issues: determination of a protected volume,

33、 clarification and updating of: the Scope, internal height of rigid carry cots, entanglement hazards (test for cords, straps and ribbons), test methods for small part, Figures 6 and 10, rewriting of the standard following the current hazard based format, introduction of requirement for carry cots wi

34、th restraint system. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europea

35、n Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven

36、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1466:2014 EN 1466:2014 (E)BS EN 1466:20141 Scope This European Standard specifies safety requirements and test methods for products which are intended for the purpose of carrying a child in a lying position by means of handle(s) an

37、d for stands which may be used in conjunction with these products (see C.2). These products are intended for a child who cannot sit unaided, roll over or push up on its hands and knees, with a maximum weight of 9 kg. Hereafter, in this European Standard these products are called “carry cots“ and inc

38、lude all types of carry cot with rigid or soft sides as well as moses baskets and any similar products. This European Standard has not considered the requirements of children with special needs. 2 Normative references The following documents, in whole or in part, are normatively referenced in this d

39、ocument and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-1, Safety of toys Part 1: Mechanical and physical properties EN 71-2:2011+A1:2014,

40、Safety of toys Part 2: Flammability EN 71-3, Safety of toys Part 3: Migration of certain elements 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 carry cot product comprising a base, sides, ends and carrying handle(s), within which a child ca

41、n be laid down and transported by hand 3.2 stand static structure designed to accommodate and support a carry cot 4 General requirements and test conditions (see C.3) 4.1 General The carry cot shall be tested when assembled for normal use in accordance with the manufacturers instructions. Any other

42、functions of the product shall comply with relevant European Standards. 4.2 Conditioning Any fabric intended to be washed/cleaned shall be washed/cleaned and dried twice in accordance with the manufacturers instructions. BS EN 1466:2014 EN 1466:2014 (E)BS EN 1466:2014Any resulting shrinkage shall no

43、t prevent the fabric from being refitted without damaging the seams of the fabric or impairing the performance of the carry cot. 4.3 Accuracy of test equipment Unless otherwise stated the accuracy of the test equipment shall be: forces 5 %; masses 0,5 %; dimensions 0,5 mm; timing 1 s; angles 0,5. 4.

44、4 Determination of a protected volume The protected volume is determined by: the inner upper surface that supports the child; and the inner surface of the sides and ends of the carry cots. 5 Test equipment 5.1 Test plate A rigid steel plate (600 5) mm long and (180 5) mm wide, having a mass of 901,0

45、0+kg hinged along the centre line (see Figure 1). Dimensions in millimetres Key 1 hinge line Figure 1 Test plate BS EN 1466:2014 EN 1466:2014 (E)BS EN 1466:2014Any resulting shrinkage shall not prevent the fabric from being refitted without damaging the seams of the fabric or impairing the performan

46、ce of the carry cot. 4.3 Accuracy of test equipment Unless otherwise stated the accuracy of the test equipment shall be: forces 5 %; masses 0,5 %; dimensions 0,5 mm; timing 1 s; angles 0,5. 4.4 Determination of a protected volume The protected volume is determined by: the inner upper surface that su

47、pports the child; and the inner surface of the sides and ends of the carry cots. 5 Test equipment 5.1 Test plate A rigid steel plate (600 5) mm long and (180 5) mm wide, having a mass of 901,00+kg hinged along the centre line (see Figure 1). Dimensions in millimetres Key 1 hinge line Figure 1 Test p

48、late BS EN 1466:2014 EN 1466:2014 (E)BS EN 1466:20145.2 Test mass A rigid cylinder (160 5) mm in diameter and (300 5) mm in height, having a mass of 901,00+kg and with its centre of gravity in the centre of the cylinder. All edges shall have a radius of (5 1) mm (see Figure 2). Dimensions in millime

49、tres Key 1 radius r = (5 1) mm Figure 2 Test mass 5.3 Test probes Probes made from plastics or other hard, smooth material of diameters (701,0+) mm and (121,00+) mm, with a full hemispherical end (see Figure 3a). Probe for assessing mesh made from plastics or other hard, smooth material (see Figure 3b) which shall be capable of being mounted on a force measuring device, so that the conical end can be presented to the opening being assessed. Probe m