EN 13492-2018 en Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites transfer stations or secondary containment.pdf

《EN 13492-2018 en Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites transfer stations or secondary containment.pdf》由会员分享，可在线阅读，更多相关《EN 13492-2018 en Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites transfer stations or secondary containment.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containmentBS EN 13492:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN

2、 13492 March 2018 ICS 59.080.70; 91.100.50 Supersedes EN 13492:2013English Version Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment Gomembranes, gsosynthtiques bentonitiques - Caractristiques requi

3、ses pour lutilisation dans la construction des sites dvacuation de rsidus liquides, des stations de transfert ou enceintes de confinement secondaires Geosynthetische Dichtungsbahnen - Eigenschaften, die fr die Anwendung beim Bau von Deponien, Zwischenlagern oder Auffangbecken fr flssige Abfallstoffe

4、 erforderlich sind This European Standard was approved by CEN on 5 November 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and

5、bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re

6、sponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

7、Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EURO

8、PEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13492:2018 ENational forewordThis British Standard is the

9、 UK implementation of EN 13492:2018. It supersedes BS EN 13492:2013, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/553, Geosynthetics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication

10、 does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93482 7ICS 59.080.70; 91.100.50Compliance with a British Standard cannot confer imm

11、unity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 13492:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1

12、3492 March 2018 ICS 59.080.70; 91.100.50 Supersedes EN 13492:2013English Version Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment Gomembranes, gsosynthtiques bentonitiques - Caractristiques requise

13、s pour lutilisation dans la construction des sites dvacuation de rsidus liquides, des stations de transfert ou enceintes de confinement secondaires Geosynthetische Dichtungsbahnen - Eigenschaften, die fr die Anwendung beim Bau von Deponien, Zwischenlagern oder Auffangbecken fr flssige Abfallstoffe e

14、rforderlich sind This European Standard was approved by CEN on 5 November 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bi

15、bliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp

16、onsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Re

17、public of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPE

18、N DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13492:2018 EBS EN 13492:2018EN 13492:2018 (E) 2 Contents Pa

19、ge European foreword . 5 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations 10 3.1 Terms and definitions 10 3.2 Abbreviations 12 4 Characteristics and corresponding methods of test 13 4.1 General . 13 4.2 Types of applications 13 4.2.1 General . 13 4.2.2 Applica

20、tion 1: “Base and side barrier” . 13 4.2.3 Application 2: “Cover barrier” . 13 4.2.4 Application 3: “secondary containment of liquid waste”. 14 4.3 Relevant characteristics 14 4.4 Characteristics relevant to specific conditions of use 21 4.4.1 General . 21 4.4.2 Gas permeability 21 4.4.3 Burst stren

21、gth and elongation . 21 4.4.4 Tear strength . 21 4.4.5 Friction characteristics (direct shear and inclined plane tests) . 21 4.4.6 Low temperature behaviour 21 4.4.7 Weathering . 22 4.4.8 Resistance to wetting and drying . 22 4.4.9 Freezethaw cycle resistance 22 4.4.10 Resistance to root penetration

22、 22 4.5 Release of dangerous substances . 22 5 Assessment and verification of constancy of performance (AVCP) . 22 5.1 General . 22 5.2 Type testing 23 5.2.1 General . 23 5.2.2 Test samples, testing and compliance criteria 24 5.2.3 Test reports 24 5.2.4 Shared other party results 24 5.2.5 Cascading

23、determination of the product type results 25 5.3 Factory production control (FPC) 26 5.3.1 General . 26 5.3.2 Requirements 26 5.3.3 Product specific requirements 32 5.3.4 Initial inspection of factory and of FPC 32 5.3.5 Continuous surveillance of FPC . 33 BS EN 13492:2018EN 13492:2018 (E) 3 5.3.6 P

24、rocedure for modifications . 33 5.3.7 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity . 33 Annex A (normative) Durability of geosynthetic barriers 35 A.1 General . 35 A.1.1 Service Life 35 A.1.2 Type testing of durability 35 A.1.3 Mechanisms of

25、degradation 36 A.1.4 Use of rework material . 36 A.1.5 Recycled materials . 36 A.2 Weathering . 36 A.2.1 General . 36 A.2.2 Direct tests and accelerated tests . 37 A.2.3 Period of exposure . 37 A.3 Products used with a service life up to 5 years 38 A.4 Other applications and service life of 25 and 5

26、0 years . 38 A.4.1 General . 38 A.4.2 Tests for PE type of GBR-P . 39 A.4.3 Tests for FPO-type of GBR-P 40 A.4.4 Tests for EPDM type of GBR-P 41 A.4.5 Tests for GBR-P made of PVC-P 41 A.4.6 Tests for clay geosynthetic barriers (GBR-C) . 42 A.5 Durability tests on GBR-P 44 A.5.1 Introduction 44 A.5.2

27、 Microbiological resistance 44 A.5.3 Resistance to environmental stress cracking . 45 A.5.4 Resistance to leaching . 46 A.5.5 Resistance to oxidation/thermal ageing 48 A.6 Evaluation tests on GBR-P and GBR-C . 50 A.6.1 General . 50 A.6.2 Evaluation by comparison of tensile properties . 50 A.6.3 Eval

28、uation by comparison of oxidative induction time (OIT) values 51 A.6.4 Evaluation by change in mass 51 A.6.5 Evaluation by change in water permeability 51 A.7 Durability tests on GBR-B 51 A.7.1 Introduction 51 A.7.2 Microbiological resistance 52 A.7.3 Resistance to environmental stress cracking . 52

29、 A.7.4 Resistance to leaching . 53 A.7.5 Resistance to oxidation/thermal ageing 54 A.7.6 Weathering resistance 54 A.8 Evaluation tests on GBR-B . 55 A.8.1 General . 55 A.8.2 Evaluation by comparison of tensile properties . 55 A.8.3 Evaluation by change in mass 55 A.8.4 Evaluation of water permeabili

30、ty . 55 A.8.5 Evaluation of flow resistance at elevated temperature 56 A.8.6 Evaluation of flexibility at low temperature . 56 A.8.7 Evaluation of ring and ball softening point temperature 56 BS EN 13492:2018EN 13492:2018 (E) 4 Annex ZA (informative) Relationship of this European Standard with Regul

31、ation (EU) No. 305/2011 . 57 ZA.1 Scope and relevant characteristics 57 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) 59 ZA.3 Assignment of AVCP tasks . 59 Bibliography . 61 BS EN 13492:2018EN 13492:2018 (E) 5 European foreword This document (EN 13492:2018) has been p

32、repared by Technical Committee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2018, and conflicting national standar

33、ds shall be withdrawn at the latest by December 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13492:2013. This do

34、cument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. The main changes with respect to the previous edition ar

35、e listed below: the list of normative references has been updated; in 3.1 three terms have been added; in 3.2 list of abbreviations has been updated; in 4.3, Table 1, has been modified to comply with the modified mandate M/386 (inclusion of elongation in separation and filtration functions) and has

36、been technically revised, all H-coded characteristics have been replaced by “A”; figures and keys have been revised; Clause 5 “Evaluation of conformity” has been superseded by new Clause 5 “Assessment and verification of constancy of performance (AVCP)” Annex A “Factory production control Factory pr

37、oduction control scheme” has been deleted; former Annex B “Durability” becomes Annex A, which has been totally revised; Annex ZA has been updated according to new template to fulfil requirements of CPR, also examples for CE-marking have been deleted. According to the CEN-CENELEC Internal Regulations

38、, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, L

39、atvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13492:2018EN 13492:2018 (E) 6 Introduction This European Standard allows manufacturers to describe geosynthetic barriers o

40、n the basis of declared values for characteristics relevant to the intended use and if tested to the specified method. It also includes procedures for assessment and verification of constancy of performance (AVCP) including the factory production control. This document can also be used by designers,

41、 end-users and other interested parties as a tool to define relevant and appropriate characteristics for specifications. Tests for some non-mandated characteristics are still under study and will be included when the standard is revised. The term “product” used in this document refers to a geosynthe

42、tic barrier, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers. This document is part of a group of standards, addressing the requirements for geosynthetic barriers when used in a specific application. Particular application cases can contain

43、requirements about additional properties and preferably standardized test methods, if they are technically relevant and not conflicting with European Standards. The design life of the product should be determined, since its function can be temporary, as construction expediency, or permanent, for the

44、 lifetime of the structure. BS EN 13492:2018EN 13492:2018 (E) 7 1 Scope This European Standard specifies the characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers and separatio

45、n layer in the construction of liquid waste disposal sites, and in the construction of transfer stations or secondary containment for the storage of liquid waste on a waste disposal site only and the appropriate test methods to determine these characteristics. The intended use of these products is t

46、o control the leakage of fluids through the construction. This European Standard is not applicable to geotextiles or geotextile-related products as defined in EN ISO 10318-1. This European Standard provides for the assessment and verification of constancy of performance (AVCP) of the product to this

47、 European Standard including factory production control procedures. This European Standard defines characteristics to be considered with regard to the presentation of performance. NOTE Where potable water is or can be in direct contact with the product, other relevant standards, requirements and/or

48、regulations can be considered for the design. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition o

49、f the referenced document (including any amendments) applies. EN 495-5:2013, Flexible sheets for waterproofing Determination of foldability at low temperature Part 5: Plastic and rubber sheets for roof waterproofing EN 1109:2013, Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flexibility at low temperature EN 1110:2010, Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flow resistance at elevated temperature EN 1296:2000, Flexible sheets