DOD A-A-51220-1985 TROUSERS PNEUMATIC ANTI-SHOCK《抗震充气式裤子》.pdf

《DOD A-A-51220-1985 TROUSERS PNEUMATIC ANTI-SHOCK《抗震充气式裤子》.pdf》由会员分享，可在线阅读，更多相关《DOD A-A-51220-1985 TROUSERS PNEUMATIC ANTI-SHOCK《抗震充气式裤子》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、COMMERCIAL ITEM DESCRIPTION TROUSERS , PNEUMATIC , ANTI -SHOCK The General Services Administration has authorized the use of this commercial item description in preference to Military Specification MIL-T-37742A. This commercial item description covers anti-shock pneumatic trousers, with three inflat

2、able chambers for applying pneumatic pressure to the abdomen, and legs, for use in emergency first aid treatment to relieve shock, restore blood pressure and counteract internal bleeding. Salient characteristics: The anti-shock pneumatic trousers shall consist of the outer garment with three individ

3、ual, removable air chambers, three manually adjustable inflation/deflation valves, three relief valves, a foot operated air pump, inflation tubing with air distribution connector, operating instructions, and a carrying case. The outer garment shall be constructed of a flexible, washable, non-shrinki

4、ng, fabric material with hook and pile closures to secure the garment around the patient. The outer garment shall have provision for three separate, removable air chambers, one for each leg and one for the abdomen. The air chambers shall be constructed of a heat sealable material that is impervious

5、to gases, and capable of maintaininy an air pressure between 88 and 120 mn Hg, when installed in the outer garment with the hook and pile fasteners closed in the normal manner of use. Each air chamber shall be individually controlled, and shall be removable from the outer garment to facil itate nece

6、ssary repairs and/or replacement. The air input to each air chamber shall be controlled through a manually adjustable inflation/deflation valve, and a normally closed pressure relief valve set to automatically release pressures within the range of 104 mn Hg 2 15% and shall automatically return to th

7、e closed position at pressure not less than 80 rim Hg. The foot operated pump shall consist of a closed dome shaped cavity, and be equipped with either integral or adjacent inlet and outlet valves. The air inlet valve shall be provided with a check valve to prevent air from being expelled through th

8、e inlet value during the pump pressure stroke. The air output valve shall be provided with a check valve to prevent air from the pressurized garment from re-entering the pump. The output of the fodt operated air pump shall be distributed to the three air chamber input valves through appropriate use

9、of X-type or Y-type connectors and suitable inflation tubing. The carrying case shall be constructed of commercial grade high impact plastic, high density polyethylene, or durable nylon fabric material. all accessories shall fit in the closed carrying case. The carrying case shall be provided with a

10、 carrying handle and latching device. The pneumatic trousers and FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-COMME

11、RCIAL ITEM DESCRIPTION A-A-52220 Operating instructions for use of the pneumatic trousers shall be included in, or attached to, the carrying case in a manner that will insure durable, permanent legibility, A repair kit shall be provided. Workmanship, The anti-shock pneumatic trousers , al 1 componen

12、ts and carrying case shall be free of defects which detract from their appearance or impair their serviceability. Unit, Each (EA), thecarrying case, as specified, constitutes one unit of issue. One pair of pneumatic trousers with accessories positioned within Contractor certification. The contractor

13、 shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications , standards, and qual ity assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and t

14、hereafter as may be otherwise provided for under the provisions of the contract. Regulatory requirements Federal Food, Drug and Cosmetic Act. If the product covered by this document hac been determined by the U. S. Food and Drug Administration to be under its jurisdiction, the offror/contractor shal

15、l cciply, and be responsible for compliance by its subContractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppl iers, with

16、 the requirements of al 1 other applicable Federal , State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Pub1 ic Law 94-580 to the maximum extent practical. In addition , the Preservation, pack

17、aging, pack,ing, labeling, and marking. Unless otherwise specified , preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions , handling, etc, involving shipment from the supply source to the rec

18、eiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. marking shall be as specified in the contract and/or order. The following National Stock Number is covered by this document: Intermediate and exterior package quantities and labe

19、ling and 6515-01-076-4713 Ordering data: (Intermediate/exterior package quantities,. and labeling and marking must be specified in the contract and/or order. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-COMMERCIAL ITEM DESCRIPTION A-A-51220 MILI

20、TARY INTERESTS: Custodians: Army-MD A ir For ce-O3 Navy -MS PREPARING ACTIVITY: DoD -MB AGE NT : DLA-DM CIVIL AGENCY COORDINATING ACTIVITY: VA-OSS Project No. 6515-3407 LOC S3-4-24 *US. GOVERNMENT PRINTING OFFICE 1988 - 606.036/4482 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-