DLA MS27469 REV H-2011 CONNECTORS RECEPTACLE ELECTRICAL WALL MOUNTING FLANGE SOLDER TYPE HERMETIC SEAL SERIES I.pdf

《DLA MS27469 REV H-2011 CONNECTORS RECEPTACLE ELECTRICAL WALL MOUNTING FLANGE SOLDER TYPE HERMETIC SEAL SERIES I.pdf》由会员分享，可在线阅读，更多相关《DLA MS27469 REV H-2011 CONNECTORS RECEPTACLE ELECTRICAL WALL MOUNTING FLANGE SOLDER TYPE HERMETIC SEAL SERIES I.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、MS27469H 26 August 2011 SUPERSEDING MS27469G 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING FLANGE, SOLDER TYPE, HERMETIC SEAL, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements fo

2、r acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, class Y. AMSC N/A FSC 5935 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27469H 2 Shell size K + .031 - .000 L

3、max M + .031 - .000 R BSC S .016 T dia + .010 - .005 W min full THD V THD Class 2A UNEF (plated) 9 .062 1.093 .659 .3595 .938 .128 .250 .6875 24 11 .406 1.031 .8125 20 13 .453 1.125 .9375 20 15 .4845 1.219 1.0625 18 17 .531 1.312 1.1875 18 19 .578 1.438 1.3125 18 21 .625 1.562 1.4375 18 23 .6875 1.6

4、88 .147 1.5625 18 25 .750 1.812 1.6875 18 FIGURE 1. Receptacle, class Y - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27469H 3 Inches mm Inches mm Inches mm Inches mm .005 0.13 .128 3.25 .4845 12.31 1.031 26.19 .008 0.20 .147 3.73 .5

5、31 13.49 1.093 27.76 .010 0.25 .250 6.35 .576 14.63 1.125 28.58 .011 0.28 .312 7.92 .578 14.68 1.219 28.68 .015 0.38 .344 8.74 .625 15.88 1.312 33.32 .016 0.41 .3595 9.13 .659 16.74 1.438 36.53 .031 0.79 .390 9.91 .6875 17.46 1.562 39.67 .062 1.57 .406 10.31 .750 19.05 1.688 42.88 .116 2.95 .453 11.

6、51 .938 23.83 1.812 46.02 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. The gauge features for GG shall be .010 (0.25 mm) smaller than the MMC size at basic location. 4. For main keyway and keyway positions, see MIL-DTL-38999. FIGURE 1. Receptacle, clas

7、s Y - Continued. REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MS27467, MS27661 and MS27653. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27469 Y 19 C 32 P A MS number Class Shel

8、l size Finish Insert arrangement Contact style Polarizing positions (no letter is required for normal) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27469H 4 Changes from previous issue. Marginal notations are not used in this revision to identif

9、y changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MS27467 MS27661 MS27653 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force 8

10、5 (Project: 5935-2011-086) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST ONLINE database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-