DLA A-A-52140 A-1999 BAGS SAND ACRYLIC《丙烯砂袋》.pdf

《DLA A-A-52140 A-1999 BAGS SAND ACRYLIC《丙烯砂袋》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-52140 A-1999 BAGS SAND ACRYLIC《丙烯砂袋》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 INCH-POUND A-A-52 140A 30 September 1999 SUPERSEDING 3 January 1994 A-A-52140 COMMERCIAL ITEM DESCRIPTION BAGS, SAND, ACRYLIC The General Services Administration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) cov

2、ers two colors of sandbags manufactured entirely of acrylic fiber, for use in field fortifications, ammunition bunkers, and gun emplacements. 2. CLASSIFICATION. The sandbags shall be classified as follows (see 7.2): Color 1 - Camouflage Green 383 Color 2 - Tan 3. SALIENT CHARACTERISTICS. 3.1 Physica

3、l form. The sandbag shall be manufactured from acrylic woven fabric, closed on two sides and the bottom, with an affixed tie string for closing the top after filling. The sandbags shall be of one-piece construction with either a sewn or woven side seam and bottom, or a combination thereof; tubular w

4、oven (sock form) sandbags shall have no side seams, but shall have a sewn bottom. The sandbags shall have nominal inside dimensions of 26 k i1/4 inches long and 14 k l/2 inches wide. 3.2 Color. The sandbags shall be either of the colors indicated in Section 2. Color 1, Camouflage Green 383, shall be

5、 in accordance with FED-STD-595, Colors Used in Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: Defense Supply Center Richmond (DSCR), ATTN: DSCR-VBD, 8000 Jefferson Davis Highway, Richmond, VA 23297-56

6、10. AMSC NIA FSC 8105 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesA-A-52 140A Government Procurement. Color 2, Tan, shall be any acceptable shade of tan agreed upon between the supplier and the Government. 3.3 Breakage. T

7、he sandbags shall resist damage when dropped onto an unyielding surface. 3.3.1 Breakage test. The sandbags shall be tested for breakage as follows. Fill the sandbag with 44 pounds k l/2 pound (approximately 760 cubic inches) of clean, dry sand and knot the tie string firmly about the choke. Adjust t

8、he contents of the bag to form a shape about 4 inches by 10 inches by 20 inches before each drop. Drop the bag (free fall) from a height of 48 inches on one face, on one side seam or the folded area where the seam would normally be located on a tubular bag, and on the butt onto a hard, unyielding su

9、rface such as stone or concrete of sufficient mass to absorb the shock without deflection. Every fourth sandbag tested shall be dropped (free fall) on the tied (choke) end in lieu of the butt drop. After each drop, the sandbag shall be examined for visual evidence of damage such as tears, punctures,

10、 broken yarns or threads, or exposure of the contents by any means other than sifting. Slight slippage or yawning in the seams shall not be considered damage. Visible evidence of damage shall constitute failure of this test. 3.4 Durability. The sandbags shall be bio-deterioration resistant and ultra

11、violet light resistant. Due to their durability, these sandbags are not recommended for temporary flood control where easy destruction and rapid deterioration of bag fabrics are desired after flood danger has passed. 3.5 Workmanship. The sandbags shall be free of holes, tears, punctures, and other d

12、efects which may affect serviceability. The sandbags shall be both dry and flexible and shall be uniform in appearance. Individual bags shall be uniform in color. The seams shall be straight and even. 4. REGULATORY REQUIREMENTS. 4.1 Recycled materials. The offerorkontractor is encouraged to use reco

13、vered materials to the maximum extent practical, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 5. QUALITY ASSURANCE PROVISIONS. 5.1 Product conformance. The product provided shall meet the salient characteristics of this CID, conform to the producers own drawings,

14、specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 5.2 Market acceptability. The item offered must have been previously sold to the Government or the co

15、mmercial market. 2 Licensed by Information Handling ServicesA-A-52 140A 1 1 - Camouflage Green 383 2 - Tan Commercial item description number Prefix for CID 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order (see 7.2). In the absence of detailed packaging

16、 requirements, the American Society for Testing and Materials (ASTM) D 395 1, Standard Practice for Commercial Packaging, shall be used. 7. NOTES. 7.1 Source of documents. 7.1.1 Activities outside the Federal Government may obtain copies of federal specifications, standards, the FAR, and CIDs as spe

17、cified in the General Information section of the Index of Federal Specifications, Standards, and Commercial Item Descriptions. The Index is for sale on a subscription basis from the Superintendent of Documents, U.S. Printing Office, Washington, DC 20402-0001. 7.1.2 Single copies of this specificatio

18、n, and other federal specifications and CIDs required by activities outside the Federal Government for bidding purposes are available without charge from the General Services Administration, Federal Supply Service Bureau, Specification Section, Suite 8100,470 LEnfant Plaza, SW, Washington, DC 20407.

19、 7.1.3 ASTM D 3951 may be obtained from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. 7.2 Ordering data. Acquisition documents must specify the following: a. Title, number, and date of this CID. b. Color of the sandbag required (see section

20、2). c. Unit and quantity required. d. Packaging requirements (see section 6). 7.3 Part identification number (PIN). The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor. 3 Licensed by Information Handling ServicesA-

21、A-52 140A 7.4 National stock numbers (NSNs). The following is a list of assigned NSNs which correspond to this CID. This list may not be indicative of all possible NSNs associated with this document. NSN Color 8 105-00-935-7101 8 105-0 1-33 1-3704 Tan Olive drab (not the same color as Camouflage Gre

22、en 383) 7.5 Sources of supply. The following suppliers produce products that are known to meet the requirements of this CID. Competition is not limited to these suppliers. Baldwin Green, Inc. 664 Marsat Ct. Chula Vista, CA 91911 (619) 424-6122 Osterneck Company, Inc. PO Box 859 US Highway 72 East Lu

23、mberton, NC 28359 (910) 738-2416 B.J. Seaman 1801 South Lumber St. Chicago, IL 60616-1509 (312) 666-6580 MILITARY INTERESTS: Custodians Air Force - 99 Army - MD1 Navy - MC CIVIL AGENCY COORDINATING ACTIVITIES: GSA-2FYE Preparing activity: DLA-GS (Project 8105-0376) Review er Air Force - 84 4 Licensed by Information Handling Services