DLA A-A-50448-1992 LAMP INCANDESCENT G-16-1 2 BAYONET CANDELABRA DOUBLE CONTACT《双接触刺刀烛台G-16-1 2白炽灯》.pdf

《DLA A-A-50448-1992 LAMP INCANDESCENT G-16-1 2 BAYONET CANDELABRA DOUBLE CONTACT《双接触刺刀烛台G-16-1 2白炽灯》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-50448-1992 LAMP INCANDESCENT G-16-1 2 BAYONET CANDELABRA DOUBLE CONTACT《双接触刺刀烛台G-16-1 2白炽灯》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、I INCH-POUND I A-A-50448 62 9999974 0063539 4 = A-A-50448 15 January 1992 COMMERCIAL ITEM DESCRIPTION LAMP, INCANDESCENT, G-16-1/2, BAYONET CANDELABRA, DOUBLE CONTACT The General Services Administration has authorized the use of this commercial item description as a replacement for MS15585 which is

2、canceled. Abstract. with a bayonet candelabra base. This commercial item description covers G-16-1/2 incandescent lamps These lamps can be identified by industry number 1020. - .508 -.O 16 k=-T t 3 MAX .603 -.O16 k3k .O60 DIA -.O06 -2.115 MAX FIGURE 1. Lamp dimensions (inches). I I I I I rBieficial

3、comments , recommendations , additions, deletions, I clarifications, etc. and any other data which may improve Ithis document should be sent by letter to: ISea Systems Command, Attn: 5523, Washington, DC 20362-5101. I Commander, Naval 0 AMSC N/A FSC 6240 DISTRIBUTION STATEMENT A. Approved for public

4、 release; distribution is unlimited. Licensed by Information Handling ServicesA-A-50448 62 9999974 0063540 O A-A- 50448 Salient characteristics. 1. Phvsical. Bulb designation G- 16 - 1/2 Bulb finish Clear Base designation Bayonet candelabra, double contact Filament type c-2v Burn position Light cent

5、er length 1-3/8 inches Base down to horizontal (distance from the center of the light source to the top of the base pins) Dimensions (See figure 1) 2. Lamp characteristics. CID Part number A50448 - 1 Indus try number 1020 Design volts 11.75 Design amperes 5.10 Candle power 100 Average life (hours) 1

6、00 Contractor certification. ing evidence that the product offered meets the salient characteristics of this Commercial Item Description and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices, ment reserves the right to require proof o

7、f such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The contractor shall certify and maintain substantiat- The govern- Renulatorv requirements. The offeror/contractor is encouraged to use recovered materials in accordance w

8、ith Public Law 94-580 to the maximum extent practical, Preservation. packagina, oacking. labelinn. and markinn. Preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order. Notes. 1. Ordering data. Purchaser should specify the following: (a) Title, number,

9、and date of this commercial item description. (b) CID part number required (see salient Characteristics). 2. Cross reference to specification-based part numbers. CID part number MS -based part number A50448 - 1 MS15585 - 3 2 Licensed by Information Handling Servicesi Custodians Army - ME Navy - SH Air Force - 99 A-A-50448 62 rn 9999974 0063543 2 rn A-A- 50448 MILITARY INTERESTS: Preparing activity: Navy - SH (Project 6240-1273) Review activities Air Force - 82 DLA - GS 3 Licensed by Information Handling Services