DIN EN ISO 11202-2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions appl1.pdf

《DIN EN ISO 11202-2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions appl1.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 11202-2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions appl1.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、October 2010 Translation by DIN-Sprachendienst.English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 17.140.20!$kVw“1725184www.din.deDDIN EN ISO 11202Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station andat other specified positions applying approximate environmentalcorrections (ISO 11202:2010)English translation of DIN EN ISO 1120

3、2:2010-10Akustik Geruschabstrahlung von Maschinen und Gerten Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderenfestgelegten Orten unter Anwendung angenherter Umgebungskorrekturen(ISO 11202:2010)Englische bersetzung von DIN EN ISO 11202:2010-10Acoustique Bruit mis par les machi

4、nes et quipements Dtermination des niveaux de pression acoustique dmission au poste de travail et endautres positions spcifies en appliquant des corrections denvironnementapproximatives (ISO 11202:2010)Traduction anglaise de DIN EN ISO 11202:2010-10SupersedesDIN EN ISO 11202:2009-11www.beuth.deDocum

5、ent comprises pagesIn case of doubt, the German-language original shall be considered authoritative.5010.10 DIN EN ISO 11202:2010-10 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 43 “Acoustics”, Subcommittee SC 1 “Noise”, Wor

6、king Group WG 28 “Basic machinery noise emission standards” in collaboration with Technical Committee CEN/TC 211 “Acoustics” (Secretariat: DS, Denmark). The responsible German body involved in its preparation was the Normenausschuss Akustik, Lrmminderung und Schwingungstechnik im DIN und VDI (Acoust

7、ics, Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Working Committee NA 001-01-04 AA Geruschemission von Maschinen und Anlagen; Messung, Minderung, Datensammlung. The DIN Standards corresponding to the International Standards referred to in this document are as follows

8、: ISO 3534-2 DIN ISO 3534-2 ISO 3740 DIN EN ISO 37401)ISO 3741 DIN EN ISO 37411)ISO 3743-1 DIN EN ISO 3743-11)ISO 3743-2 DIN EN ISO 3743-2 ISO 3744 DIN EN ISO 37441)ISO 3745 DIN EN ISO 37451)ISO 3746 DIN EN ISO 37461)ISO 3747 DIN EN ISO 37471)ISO 4871 DIN EN ISO 4871 standards series standards serie

9、s ISO 5725 DIN ISO 5725 ISO 6926 DIN EN ISO 6926 ISO 7574-1 DIN EN 27574-1 ISO 9614-1 DIN EN ISO 9614-1 ISO 9614-2 DIN EN ISO 9614-2 ISO 9614-3 DIN EN ISO 9614-3 ISO 11200 DIN EN ISO 112001)ISO 11201 DIN EN ISO 11201 ISO 11203 DIN EN ISO 11203 ISO 11204 DIN EN ISO 11204 ISO 11205 DIN EN ISO 11205 IS

10、O/TR 11690-3 DIN EN ISO 11690-3 ISO 12001 DIN EN ISO 12001 IEC 60942 DIN EN 60942 IEC 61260 DIN EN 61260 IEC 61672-1 DIN EN 61672-1 ISO/IEC Guide 98-3 DIN V ENV 13005 Amendments This standard differs from DIN EN ISO 11202:2009-11 as follows: a) the method has been extended to accuracy grade 2 (engin

11、eering grade) and accuracy grade 3 (survey grade); b) a further procedure for the determination of the local environmental correction on the basis of the approximate apparent work station directivity index has been added; c) criteria for the test environment (1.3) have been specified; d) criteria fo

12、r background noise (6.4) have been supplemented and absolute criteria (B.1) have been added; e) at a specified altitude of the measurement position above sea level and depending on the accuracy grade, the emission sound pressure level is to be normalized to the reference meteorological conditions; 1

13、) Under revision. DIN EN ISO 11202:2010-10 3 f) Clause 11 “Measurement uncertainty” has been completely revised and a new Annex C “Guidance on the development of information on measurement uncertainty” has been included; g) Annex D “Principles of the methodology” has been included; h) the former Ann

14、ex A “Guidelines for the detection of impulsive noise” has been deleted; i) the standard has been editorially revised. Previous editions DIN 45635: 1970-03 DIN 45635-1: 1972-01, 1984-04 DIN EN ISO 11202: 1996-07, 2009-11 National Annex NA (informative) Bibliography DIN V ENV 13005, Guide to the expr

15、ession of uncertainty in measurement DIN EN 27574-1, Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 1: General considerations and definitions DIN EN 60942, Electroacoustics Sound calibrators (IEC 60942:2003) DIN EN 61260, Elec

16、troacoustics Octave-band and fractional-octave-band filters DIN EN 61672-1, Electroacoustics Sound level meters Part 1: Specifications DIN EN ISO 3740, Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards DIN EN ISO 3741, Acoustics Determination of

17、 sound power levels of noise sources using sound pressure Precision methods for reverberation rooms DIN EN ISO 3743-1, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for hard-walled test ro

18、oms DIN EN ISO 3743-2, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms DIN EN ISO 3744, Acoustics Determination of sound power levels of noise

19、 sources using sound pressure Engineering method in an essentially free field over a reflecting plane DIN EN ISO 3745, Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for anechoic and hemi-anechoic rooms DIN EN ISO 11202:2010-10 4 DIN EN ISO 3746

20、, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane DIN EN ISO 3747, Acoustics Determination of sound power levels of noise sources using sound pressure Comparison method for use in situ D

21、IN EN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipment DIN EN ISO 6926, Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels DIN EN ISO 9614-1, Acoustics Determinatio

22、n of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning DIN EN ISO 9614-3, Acoustics Determination of sound power leve

23、ls of noise sources using sound intensity Part 3: Precision method for measurement by scanning DIN EN ISO 11200, Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specifi

24、ed positions DIN EN ISO 11201, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane DIN EN ISO 11203, Acoustics Noise emitted by mach

25、inery and equipment Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level DIN EN ISO 11204, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specifie

26、d positions applying accurate environmental corrections DIN EN ISO 11205, Acoustics Noise emitted by machinery and equipment Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity DIN EN ISO 11690-

27、3, Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 3: Sound propagation and noise prediction in workrooms DIN EN ISO 12001, Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code DIN ISO 3534-2,

28、Statistics Vocabulary and symbols Part 2: Applied statistics DIN ISO 5725 (all parts), Accuracy (trueness and precision) of measurement methods and results EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11202 May 2010 ICS 17.140.20 Supersedes EN ISO 11202:2009English Version Acoustics - No

29、ise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) Acoustique - Bruit mis par les machines et quipements -Dtermination des niveaux de pression acou

30、stique dmission au poste de travail et en dautres positions spcifies en appliquant des corrections denvironnement approximatives (ISO 11202:2010) Akustik - Geruschabstrahlung von Maschinen und Gerten - Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten unter

31、 Anwendung angenherter Umgebungskorrekturen (ISO 11202:2010) This European Standard was approved by CEN on 22 April 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho

32、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language

33、made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, F

34、inland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHE

35、S KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11202:2010: EContents 2 Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 6 3 Terms an

36、d definitions .7 4 Instrumentation12 5 Procedures to determine the local environmental correction, K3A12 6 Test environment.13 7 Measured quantities 15 8 Quantities to be determined .15 9 Mounting and operation of source under test 16 10 Microphone positions .18 11 Measurements20 12 Measurement unce

37、rtainty .22 13 Information to be recorded .25 14 Test report 26 Annex A (normative) Environmental correction for a work station Determination of the local environmental correction, K328 Annex B (normative) Criteria for background noise for measurements in frequency bands.34 Annex C (informative) Gui

38、dance on the development of information on measurement uncertainty.36 Annex D (informative) Principles of the methodology 42 Annex E (informative) Example of a test table .43 Bibliography 44 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Direc

39、tive 2006/42/EC 46 EN ISO 11202:2010 (E) DIN EN ISO 11202:2010-10 Foreword 3 This document (EN ISO 11202:2010) has been prepared by Technical Committee ISO/TC 43 “Acoustics” in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standar

40、d shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2010, and conflicting national standards shall be withdrawn at the latest by November 2010. Attention is drawn to the possibility that some of the elements of t

41、his document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11202:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free

42、Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bou

43、nd to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

44、Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11202:2010 has been approved by CEN as a EN ISO 11202:2010 without any modification. EN ISO 11202:2010 (E) DIN EN ISO 11202:2010-10 Introduction This International Standard specifies a method for determining the emission

45、sound pressure levels at a work station and at other well defined positions, in the vicinity of a machine or piece of equipment, in situ. It is one of a series (ISO 1120015to ISO 1120519) which specifies various methods for determining the emission sound pressure level at a work station and at other

46、 specified positions of a machine or equipment. ISO 1120015gives guidance on the choice of the method to be used to determine the emission sound pressure levels of machinery and equipment. The method specified in this International Standard differs from those of ISO 1120116in determining and applyin

47、g a local environmental correction. It differs from ISO 1120418by using an approximate method to determine the directivity of the sound radiation of a machine with a reduced number of measurement positions or even with no additional measurement. The acoustical properties of the room have to be deter

48、mined to qualify the test environment and to determine a correction for local environmental influences applied to the measured sound pressure levels. With the method specified in this International Standard, results of accuracy grade 2 (engineering grade) or accuracy grade 3 (survey grade) are obtai

49、ned. For the determination of the local environmental correction two procedures are specified in this International Standard. The first procedure (see A.1) is based on the assumption that a well-defined part of the machine, visible from and with free propagation conditions to the work station or the specified position, radiates the sound responsible for the sound pressure level at this position. With this assumption, only a sound pressure m