DIN EN ISO 11200-2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a S.pdf
《DIN EN ISO 11200-2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a S.pdf》由会员分享,可在线阅读,更多相关《DIN EN ISO 11200-2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a S.pdf(47页珍藏版)》请在麦多课文档分享上搜索。
1、October 2014 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 17.140.20!%;ja“2247162www.din.deDDIN EN ISO 11200Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination ofemission sound pressure levels at a work station and at other specifiedpositions (ISO 11200:2014);English version EN ISO 11200:2014,
3、English translation of DIN EN ISO 11200:2014-10Akustik Geruschabstrahlung von Maschinen und Gerten Leitlinien zur Anwendung der Grundnormen zur Bestimmung vonEmissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten(ISO 11200:2014);Englische Fassung EN ISO 11200:2014,Englische be
4、rsetzung von DIN EN ISO 11200:2014-10Acoustique Bruit mis par les machines et quipements Guide dutilisation des normes de base pour la dtermination des niveaux de pressionacoustique dmission au poste de travail et en dautres positions spcifies(ISO 11200:2014);Version anglaise EN ISO 11200:2014,Tradu
5、ction anglaise de DIN EN ISO 11200:2014-10SupersedesDIN EN ISO 11200:2010-01www.beuth.deDocument comprises 47 pagesIn case of doubt, the German-language original shall be considered authoritative.09.14 DIN EN ISO 11200:2014-10 2 A comma is used as the decimal marker. National foreword This standard
6、(EN ISO 11200:2014) has been prepared by Technical Committee ISO/TC 43 “Acoustics”, Subcommittee SC 1 “Noise” (Secretariat: DS, Denmark), Working Group WG 28 “Basic machinery noise emission standards“ in collaboration with Technical Committee CEN/TC 211 “Acoustics” (Secretariat: DS, Denmark). The re
7、sponsible German body involved in its preparation was the DIN-Normenausschuss Akustik, Lrmminderung und Schwingungstechnik im DIN und VDI (DIN and VDI Standards Committee Acoustics, Noise Control and Vibration Engineering), Working Committee NA 001-01-04 AA Geruschemission von Maschinen und Anlagen;
8、 Messung, Minderung, Datensammlung. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 3740 DIN EN ISO 3740 ISO 11201 DIN EN ISO 11201 ISO 3741 DIN EN ISO 3741 ISO 11202 DIN EN ISO 11202 ISO 3743-1 DIN EN ISO 3743-1 ISO 11203 DIN EN ISO 11
9、203 ISO 3743-2 DIN EN ISO 3743-2 ISO 11204 DIN EN ISO 11204 ISO 3744 DIN EN ISO 3744 ISO 11205 DIN EN ISO 11205 ISO 3745 DIN EN ISO 3745 ISO 11690-3 DIN EN ISO 11690-3 ISO 3746 DIN EN ISO 3746 ISO 12001 DIN EN ISO 12001 ISO 3747 DIN EN ISO 3747 IEC 60942 DIN EN 60942 ISO 4871 DIN EN ISO 4871 IEC 610
10、43 DIN EN 61043 ISO 9612 DIN EN ISO 9612 IEC 61260 DIN EN 61260 ISO 9614-1 DIN EN ISO 9614-1 IEC 61672-1 DIN EN 61672-1 ISO 9614-2 DIN EN ISO 9614-2 ISO/IEC Guide 98-3 DIN V ENV 13005 ISO 9614-3 DIN EN ISO 9614-3 The German Standards are given in National Annex NA “Bibliography”. Amendments This sta
11、ndard differs from DIN EN ISO 11200:2010-01 as follows: a) the standard has been aligned with the revised standards DIN EN ISO 11201, DIN EN ISO 11202 and DIN EN ISO 11204; b) the document has been extensively restructured; c) explanatory notes to basic descriptors have been included; d) the selecti
12、on of the most appropriate method has been supplemented by tables and flow charts; e) the benefits and constraints of the various methods are listed in a table; f) information on the test environment and the relevant environmental correction has been added; g) case studies of practical applications
13、of this standards group have been included. Previous editions DIN 45635: 1970-03 DIN 45635-1: 1972-01, 1984-04 DIN EN ISO 11200: 1996-07, 2010-01 DIN EN ISO 11200:2014-10 3 National Annex NA (informative) Bibliography DIN V ENV 13005, Guide to the expression of uncertainty in measurement DIN EN 6094
14、2, Electroacoustics Sound calibrators DIN EN 61043, Electroacoustics Instruments for the measurement of sound intensity Measurement with pairs of pressure sensing microphones DIN EN 61260, Electroacoustics Octave-band and fractional-octave-band filters DIN EN 61672-1, Electroacoustics Sound level me
15、ters Part 1: Specifications DIN EN ISO 3740, Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards DIN EN ISO 3741, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for rev
16、erberation test rooms DIN EN ISO 3743-1, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room DIN EN ISO 3743-2, Acoustics
17、 Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms DIN EN ISO 3744, Acoustics Determination of sound power levels and sound energy levels of noise sources
18、 using sound pressure Engineering methods for an essentially free field over a reflecting plane DIN EN ISO 3745, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for anechoic rooms and hemi-anechoic rooms DIN EN ISO 3746, A
19、coustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane DIN EN ISO 3747, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound
20、 pressure Engineering/survey methods for use in situ in a reverberant environment DIN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipment DIN EN ISO 9612, Acoustics Determination of occupational noise exposure Engineering method DIN EN ISO 9614-1, Aco
21、ustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning DIN EN ISO 11200:2014-10 4 DIN EN ISO 9614-
22、3, Acoustics Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning DIN EN ISO 11201, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified p
23、ositions in an essentially free field over a reflecting plane with negligible environmental corrections DIN EN ISO 11202, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environ
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DINENISO112002014ACOUSTICSNOISEEMITTEDBYMACHINERYANDEQUIPMENTGUIDELINESFORTHEUSEOFBASICSTANDARDSFORTHEDETERMINATIONOFEMISSIONSOUNDPRESSURELEVELSATASPDF

链接地址:http://www.mydoc123.com/p-678828.html