DIN EN 13141-7-2011 en 1719 Ventilation for buildings - Performance testing of components products for residential ventilation - Part 7 Performance testing of a mechanical supply a.pdf

《DIN EN 13141-7-2011 en 1719 Ventilation for buildings - Performance testing of components products for residential ventilation - Part 7 Performance testing of a mechanical supply a.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13141-7-2011 en 1719 Ventilation for buildings - Performance testing of components products for residential ventilation - Part 7 Performance testing of a mechanical supply a.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、January 2011 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 91.140.30!$m,R“1740947www.din.deDDIN EN 13141-7Ventilation for buildings Performance testing of components/products for residentialventilation Part 7: Performance testing of a mechanical supply and exhaustventilation units (including heat recovery) for mechanical ventilationsystems intended for si

3、ngle family dwellingsEnglish translation of DIN EN 13141-7:2011-01Lftung von Gebuden Leistungsprfungen von Bauteilen/Produkten fr die Lftung von Wohnungen Teil 7: Leistungsprfung von mechanischen Zuluft- und Ablufteinheiten (einschlielichWrmerckgewinnung) fr mechanische Lftungsanlagen in Wohneinheit

4、en (Wohnungoder Einfamilienhaus)Englische bersetzung von DIN EN 13141-7:2011-01Ventilation des btiments Essais de performance des composants/produits pour la ventilation des logements Partie 7: Essais de performance des centrales double flux (y compris la rcupration dechaleur) pour les systmes de ve

5、ntilation mcaniques prvus pour des logementsindividuelsTraduction anglaise de DIN EN 13141-7:2011-01SupersedesDIN EN 13141-7:2004-09www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.3801.11 DIN EN 13141-7:2011-01 A comma is used as t

6、he decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 156 “Ventilation for buildings” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Heiz- und Raumlufttechnik (Heating and Ventilation Te

7、chnology Standards Committee), Working Committee NA 041-02-51 AA Lftung von Wohnungen. Amendments This standard differs from DIN EN 13141-7:2004-09 as follows: a) the title of the standard has been changed; b) the scope has been changed from supply and exhaust ventilation units with plate heat excha

8、ngers to supply and exhaust ventilation units with different heat exchangers and fan positions; c) the scope has been extended to include the testing and assessment of air-to-air heat exchangers (extract air to outdoor air); d) the test conditions (temperature and humidities) have been brought in li

9、ne with DIN EN 14511 and the reference to DIN EN 308 has been deleted; e) temperature and humidity ratios can now be determined and stated as thermal characteristics. These values have been defined for both the supply air side and the exhaust air side; f) examples of some possible arrangements of he

10、at recovery heat exchangers and/or heat pumps have been included in an informative Annex A; g) two normative test methods have been included for the assessment of leakage: the pressure leakage test method (Annex A) and, for other than plate heat exchangers, the tracer gas test method (Annex B). Prev

11、ious editions DIN EN 13141-7: 2004-09 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13141-7 November 2010 ICS 91.140.30 Supersedes EN 13141-7:2004English Version Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing

12、of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings Ventilation des btiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 7: Essais de performance des cent

13、rales double flux (y compris la rcupration de chaleur) pour les systmes de ventilation mcaniques prvus pour des logements individuels Lftung von Gebuden - Leistungsprfungen von Bauteilen/Produkten fr die Lftung von Wohnungen - Teil 7: Leistungsprfung von mechanischen Zuluft- und Ablufteinheiten (ein

14、schlielich Wrmerckgewinnung) fr mechanische Lftungsanlagen in Wohneinheiten (Wohnung oder Einfamilienhaus) This European Standard was approved by CEN on 25 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea

15、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English,

16、 French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cr

17、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDAR

18、DIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13141-7:2010: EEN 13141-7:2010 (E) 2 Contents Foreword

19、 3Introduction . 51 Scope 52 Normative references 63 Terms, definitions and classification 63.1 Terms and definitions . 73.2 Categories of heat exchangers 84 Symbols and abbreviations 95 Requirements . 96 Test methods 106.1 General 106.2 Performance testing of aerodynamic characteristics 116.2.1 Lea

20、kages . 116.2.2 Air flow/pressure curve . 136.2.3 Filter bypass . 146.3 Performance testing of thermal characteristics . 146.3.1 General 146.3.2 Temperature and humidity ratios . 156.3.3 Heat pump performance . 186.3.4 Combined heat pump and air-to-air heat exchanger performance 186.4 Performance te

21、sting of acoustic characteristics . 196.4.1 Noise radiated through the casing of the unit 196.4.2 Sound power level in duct connections of the unit . 206.5 Electric power input. 227 Test results . 237.1 Test report 237.2 Product specifications 237.3 Leakages . 237.4 Air flow/pressure curve . 247.5 H

22、eat pump exhaust air/outdoor air performances . 247.6 Temperature ratios 247.7 Acoustic characteristics . 257.8 Electric power input. 25Annex A (informative) Example of some possible arrangements of heat recovery heat exchanger and/or heat pumps for category I . 26Annex B (normative) Pressure leakag

23、e test method . 28B.1 External leakage. 28B.2 Internal leakage test 28Annex C (normative) Tracer gas test method 30C.1 General method for rating purposes . 30C.2 Augmented method for measuring instantaneous recirculation of ducted units under different operating conditions (optional) . 31C.3 Testing

24、 orders for tracer gas tests 32Bibliography 36DIN EN 13141-7:2011-01 Page EN 13141-7:2010 (E) 3 Foreword This document (EN 13141-7:2010) has been prepared by Technical Committee CEN/TC 156 “Ventilation for buildings”, the secretariat of which is held by BSI. This European Standard shall be given the

25、 status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subjec

26、t of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13141-7:2004. Compared to the 2004 version, changes have been made to the following (sub)clauses, tables and annexes: modification of the test temperatures

27、to be similar to those of heat pump; possibility of measuring supply and exhaust ventilation and heat pump; suppression of reference to EN 308 for heat exchangers particular test conditions, this standard define its own conditions; introduction of tracer gas method for leakages; dependence of leakag

28、es under/over pressure configurations on fan position in airflow; obligation of reporting the two temperature ratios (on exhaust and supply air); possibility of doing an optional test by measuring on the outdoor side of the building while the measure is made on the inside side of the building in the

29、 mandatory test (exhaust and supply air flow rate); possibility of giving humidity ratios, like for PAC, this allowed to test enthalpy heat exchangers; review of value for balanced mass flows at 3 %, over 3% declaration of unbalanced unit and report of the disbalance value; setting of the declared m

30、aximum air volume flow at 50 Pa by default in lack of other declaration; addition of the declared minimum air volume flow at Ptud/2 and minimum setting; creation of a reference point at Ptud/2 and 70 % of declared maximum air volume flow; correction of the temperature ratios considering flow rate ra

31、tios. This standard is a part of a series of standards on residential ventilation. It has a parallel standard referring to the performance characteristics of the components/products for residential ventilation. The position of this standard in the field of standards for the mechanical building servi

32、ces is shown in Figure 1. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

33、 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 13141-7:2011-01 EN 13141-7:2010 (E) 4 Mechanical Building Services Control systems Ventilation and ai

34、r conditioning systems Heating systems Ductwork Air terminal devices Air handling units Mechanical and natural residential ventilation Design criteria for the indoor environment System performance Installation Components/products for residential ventilation Required and optional performance characte

35、ristics Performance testing of components/products for residential ventilation Simplified calculation methods for residential ventilation systems Design and dimensioning for residential ventilation systems Performance testing and installation checks for residential ventilation systems Part 1: Extern

36、ally and internally mounted air transfer devices Part 2: Exhaust and supply air terminal devices Part 3: Range hoods for residential use Part 4: Fans used in residential ventilation systems Part 5: Cowls and roof outlet terminal devices Part 6: Exhaust ventilation system packages used in a single dw

37、elling Part 7: Mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilati

38、on systems intended for a single room Part 9: Externally mounted humidity controlled air transfer device Part 10: Humidity controlled extract air terminal device Figure 1 Position of EN 13141-7 in the field of the mechanical building services DIN EN 13141-7:2011-01 EN 13141-7:2010 (E) 5 Introduction

39、 This European Standard specifies methods for the performance testing of components used in residential ventilation systems to establish the performance characteristics as identified in EN 13142. This European Standard does not contain any information on ductwork and fittings, which are covered by o

40、ther European Standards. The standard can be used for the following applications: laboratory testing; attestation purposes. 1 Scope This part of EN 13141 specifies the laboratory test methods and test requirements for the testing of aerodynamic, thermal and acoustic performance, and the electrical p

41、erformance characteristic of a mechanical supply and exhaust ventilation units used in a single dwelling. It covers unit that contain at least, within one or more casing: supply and exhaust air fans; air filters; air-to-air heat exchanger and/or Extract Air-to-Outdoor Air heat pump for extract air h

42、eat recovery; control system. Such unit can be provided in more than one assembly, the separate assemblies of which are designed to be used together. The different possible arrangements of heat recovery heat exchangers and/or heat pumps are described in Annex A. This standard does not deal with non-

43、ducted units or reciprocating heat exchangers. This standard does not deal with units that supply several dwellings. This standard does not cover ventilation systems that may also provide water space heating and hot water. This standard does not cover units including combustion engine driven compres

44、sion heat pumps and absorption heat pumps. Electrical safety requirements are given in EN 60335-2-40 and EN 60335-2-80. DIN EN 13141-7:2011-01 EN 13141-7:2010 (E) 6 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated re

45、ferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 306, Heat exchangers Methods of measuring the parameters necessary for establishing the performance EN 12792:2003, Ventilation for buildings Symbols,

46、 terminology and graphical symbols EN 13141-4, Ventilation for buildings Performance testing of components/products for residential ventilation Part 4: Fans used in residential ventilation systems EN 14511-2, Air conditioners, liquid chilling packages and heat pumps with electrically driven compress

47、ors for space heating and cooling Part 2: Test conditions EN 14511-3, Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 3: Test methods EN 14511-4, Air conditioners, liquid chilling packages and heat pumps with electrica

48、lly driven compressors for space heating and cooling Part 4: Requirements EN ISO 3741, Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001) EN ISO 3743-1, Acoustics Determination of sound p

49、ower levels of noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) EN ISO 3743-2, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in