DIN EN 12309-6-2015 Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 6 Calculation of seasonal performances German version .pdf

《DIN EN 12309-6-2015 Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 6 Calculation of seasonal performances German version .pdf》由会员分享，可在线阅读，更多相关《DIN EN 12309-6-2015 Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 6 Calculation of seasonal performances German version .pdf（53页珍藏版）》请在麦多课文档分享上搜索。

1、March 2015 Translation by DIN-Sprachendienst.English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.140.30; 27.080This standard has been included in the body of DVGW Technical Rules.!%A3#“2301600www.din.deDDIN EN 12309-6Gas-fired sorption appliances for heating and/or cooling with a net heatinput not exceeding 70 kW Part 6: Calculation of seasonal performances;English version EN 12309-6:2014,En

3、glish translation of DIN EN 12309-6:2015-03Gasbefeuerte Sorptions-Gerte fr Heizung und/oder Khlung mit einerNennwrmebelastung nicht ber 70 kW Teil 6: Berechnung der saisonalen Effizienzkennzahlen;Englische Fassung EN 12309-6:2014,Englische bersetzung von DIN EN 12309-6:2015-03Appareils sorption fonc

4、tionnant au gaz pour le chauffage et/ou le refroidissement dedbit calorifique sur PCI infrieur ou gal 70 kW Partie 6: Calcul des performances saisonnires;Version anglaise EN 12309-6:2014,Traduction anglaise de DIN EN 12309-6:2015-03Together with DIN EN 12309-7:2015-03 supersedes DIN EN 12309-2:2000-

5、06See start of applicationSupersedes: see belowwww.beuth.deDocument comprises 53 pagesIn case of doubt, the German-language original shall be considered authoritative.02.15 DIN EN 12309-6:2015-03 2 A comma is used as the decimal marker. Start of application The start of application of this standard

6、is 2015-03-01. DIN EN 12309-2:2000-06 may be used in parallel until 2015-06-30. National foreword This standard includes safety requirements. This document (EN 12309-6:2014) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fi

7、red endothermic engine heat pumps and domestic gas-fired washing and drying appliances” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Committee NA 032-03-01 AA Husliche, gewe

8、rbliche und industrielle Gasanwendung. This standard has been developed with the consensus of the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water) and has been included in the body of technical rules and standards for gas issued by

9、the DVGW. Amendments This standard differs from DIN EN 12309-2:2000-06 as follows: a) the EN 12309 standards series has been restructured and supplemented: EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, and EN 12309-1 and EN 12309 Parts 3 to 7 supersede EN 12309-2:2000; b) EN 12309-6:2014 deal

10、s particularly with the calculation methods for reference seasonal performance in cooling and heating mode for monovalent and bivalent appliances and serves as an input for the calculation of the system energy efficiency in heating mode of specific heat pump systems in buildings, as stipulated in EN

11、 15316-4-2. Previous editions DIN 33830-2: 1988-06 DIN EN 12309-2: 2000-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12309-6 December 2014 ICS 27.080; 91.140.30 Supersedes EN 12309-2:2000English Version Gas-fired sorption appliances for heating and/or cooling with a net heat input not exc

12、eeding 70 kW - Part 6: Calculation of seasonal performances Appareils sorption fonctionnant au gaz pour le chauffage et/ou le refroidissement de dbit calorifique sur PCI infrieurou gal 70 kW - Partie 6 : Calcul des performances saisonnires Gasbefeuerte Sorptions-Gerte fr Heizung und/oder Khlung mit

13、einer Nennwrmebelastung nicht ber 70 kW -Teil 6: Berechnung der saisonalen Effizienzkennzahlen This European Standard was approved by CEN on 18 October 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

14、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Frenc

15、h, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,

16、Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey a

17、nd United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

18、No. EN 12309-6:2014 EEN 12309-6:2014 (E) 2 Contents Page Foreword 4 1 Scope 6 1.1 Scope of EN 12309 .6 1.2 Scope of this Part 6 to EN 12309 6 2 Normative references 7 3 Terms and definitions .7 4 Calculation methods for reference SGUE and SAEF in cooling mode .7 4.1 General 7 4.2 Part load condition

19、s 7 4.2.1 General 7 4.2.2 Air-to-water appliances .8 4.2.3 Water-to-water and brine-to-water appliances .8 4.3 Calculation of reference SGUEc .8 4.4 Calculation of reference SAEFc .9 4.5 Calculation of reference annual cooling demand (Qrefc) . 10 4.6 Calculation of reference SAEFcon10 4.7 Procedures

20、 for the determination of GUEc / AEFc values . 11 5 Calculation methods for reference seasonal performance in heating mode . 11 5.1 General . 11 5.2 Part load conditions . 12 5.2.1 General . 12 5.2.2 Air-to-water appliances 13 5.2.3 Water-to-water and brine-to-water appliances 19 5.3 Calculation of

21、reference SPERh . 27 5.4 Calculation of reference SGUEh 27 5.5 Calculation of reference SAEFh 29 5.6 Calculation of reference annual heating demand (Qrefh) . 29 5.7 Calculation of reference SAEFhon. 30 5.8 Procedures for the determination of GUEh / AEFh values . 30 Annex A (informative) Calculation

22、example for reference SGUEc and SAEFc 31 Annex B (informative) Calculation example for reference SGUEh, SAEFh and SPERh 33 Annex C (normative) Number of hours in thermostat off mode, stand-by mode and off mode for reference SAEFc and SAEFh calculation 35 Annex D (normative) Calculation of the refere

23、nce seasonal performance in heating mode for bivalent appliances . 38 D.1 General . 38 D.2 Determination of auxiliary gas boiler efficiency and heating capacity . 38 D.3 Determination of GUEh and AEFh 38 D.4 Seasonal performance figures for the bivalent appliance as a whole 39 D.5 Seasonal performan

24、ce figures for the sole heat pumps appliance during active mode 41 Annex E (normative) Procedures for the determination of GUEh, AEFh and SAEFh value with multiple identical heat pumps . 43 E.1 General . 43 DIN EN 12309-6:2015-03 EN 12309-6:2014 (E) 3 E.2 Calculation procedure for GUEh and AEFh for

25、fixed capacity heat pumps 43 E.3 Calculation procedure for GUEh and AEFh for variable capacity heat pumps 44 E.4 Calculation procedure for SAEFh 45 Annex F (informative) Table of tables for part load conditions in heating mode . 46 Annex G (normative) Calculation of seasonal space heating energy eff

26、iciency for monovalent or bivalent gas-driven sorption heat pump based heating appliances 47 Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 813/2013 . 49 Annex ZB (informative) Relationship between this European Standard and t

27、he requirements of Commission Regulation (EC) No 811/2013 . 50 Bibliography 51 DIN EN 12309-6:2015-03 EN 12309-6:2014 (E) 4 Foreword This document (EN 12309-6:2014) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endot

28、hermic engine heat pumps and domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting

29、national standards shall be withdrawn at the latest by June 2015. This document supersede EN 12309-2:2000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all

30、 such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and Annex ZB, which are integr

31、al parts of this document. This standard comprises the following parts under the general title, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW: Part 1: Terms and definitions; Part 2: Safety; Part 3: Test conditions; Part 4: Test methods; Part 5: Re

32、quirements; Part 6: Calculation of seasonal performances; Part 7: Specific provisions for hybrid appliances; Part 8: Environmental aspects. EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, whereas EN 12309-1, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 supersede EN 12309-2:200

33、0. EN 12309-1, EN 12309-2, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 have been prepared to address the essential requirements of the European Directive 2009/142/EC relating to appliances burning gaseous fuels (see Annex ZA of prEN 12309-2:2013 for safety aspects and Annex ZA of

34、EN 12309-5:2014 for rational use of energy aspects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests conditions, tests methods and seasonal performances calculation methods under Mandate M/495 (see EN 12309-3:2014, Annex ZA; EN 12309-4:2014, Annex

35、ZA; EN 12309-6:2014, Annex ZA and EN 12309-7:2014, Annex ZA and prEN 12309-2:2013, Annex ZB and EN 12309-5:2014, Annex ZB). These documents will be reviewed whenever new mandates could apply. DIN EN 12309-6:2015-03 EN 12309-6:2014 (E) 5 EN 12309-8 (“Environmental aspects”) deals with the incorporati

36、on of the Resolution BT 27/2008 regarding CEN approach on addressing environmental issues in product and service standards. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgi

37、um, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer

38、land, Turkey and the United Kingdom. DIN EN 12309-6:2015-03 EN 12309-6:2014 (E) 6 1 Scope 1.1 Scope of EN 12309 Appliances covered by this standard include one or a combination of the following: gas-fired sorption chiller; gas-fired sorption chiller/heater; gas-fired sorption heat pump. This Europea

39、n Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and type C (according to CEN/TR 1749) and to appliances designed for outdoor installations.

40、 EN 12309 does not apply to air conditioners, it only applies to appliances having: integral burners under the control of fully automatic burner control systems, closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated

41、, mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2014). In the case of packaged units (consisting of several parts), this European Standa

42、rd applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the scope of

43、 EN 12309. All the symbols given in this text should be used regardless of the language used. 1.2 Scope of this Part 6 to EN 12309 This part of EN 12309 specifies the calculation methods of seasonal performances for gas-fired sorption appliances for heating and/or cooling with a net heat input not e

44、xceeding 70 kW. It deals in particular with the calculation methods of reference seasonal performances in cooling and heating mode for monovalent and bivalent appliances. NOTE This European Standard serves as an input for the calculation of the system energy efficiency in heating mode of specific he

45、at pump systems in buildings, as stipulated in EN 15316-4-2. DIN EN 12309-6:2015-03 EN 12309-6:2014 (E) 7 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition

46、 cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12309-1:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 1: Terms and definitions EN 12309-4:2014, Gas-fired sorpt

47、ion appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 4: Test methods EN 15502-1, Gas-fired heating boilers Part 1: General requirements and tests 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12309-1:2014 apply. 4

48、 Calculation methods for reference SGUE and SAEF in cooling mode 4.1 General The calculation of the reference Seasonal Gas Utilization Efficiency ratio in cooling mode (SGUEc) and reference Seasonal Auxiliary Energy factor in cooling mode (SAEFc) follows from the application of the bin method, where the part load Gas Utilization Efficiency ratio in cooling mode (GUEc) and Auxiliary Energy Factor in cooling mode (AEFc) at each bin temperature is determined via linear interpolation of the respective