DIN 15402-1-1982 Lifting hooks for lifting appliances Ramshorn hooks Unmaschined parts《起重机用吊钩 （Ramshorn hooks）双钩 毛坯件》.pdf

《DIN 15402-1-1982 Lifting hooks for lifting appliances Ramshorn hooks Unmaschined parts《起重机用吊钩 （Ramshorn hooks）双钩 毛坯件》.pdf》由会员分享，可在线阅读，更多相关《DIN 15402-1-1982 Lifting hooks for lifting appliances Ramshorn hooks Unmaschined parts《起重机用吊钩 （Ramshorn hooks）双钩 毛坯件》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、UDC 621.86.061.1 DEUTSCHE NORM November 1982 DIN 15 402 Lifting hooks for lifting appliances Ramshorn hooks Part 1 Unmachined parts Lasthaken fr Hebezeuge; Doppelhaken; Rohteile Supersedes July 1970 edition 4s it is current practice in standards published by the International Organization for Standa

2、rdization (JSO), the comma bas been used throughout as a decimal marker. Dimensions in mm 1 Field of application and purpose This standard applies to drop forged and hammer forged unmachined parts with or without nose for ramshorn hooks on lifting means and load carrying means of lifting appliances,

3、 which are used primar- ily for the suspension of loads. The correlation of the lifting capacity of the ramshorn hooks to the strength classes and driving gear groups is in accordance with DIN 15 400. The dimensions specified for II apply to ramshorn hooks forming part of a lifting hook suspension c

4、onforming to DIN 15 41 1. If in exceptional cases, e. g. for existing lifting appliances, different lengths I1 are needed, this must be mutually agreed on ordering. In the case of ramshorn hooks which are exposed to intense heat (e. g. where the conveyance for molten masses is involved), it is recom

5、mended adopting laminated hooks conforming to DIN 15 407 Part 1 and Part 2 for ramshorn hooks of size No. 20 and above. In this way. it is possible to standardize the unmachined parts of ramshorn hooks made by different manufacturers. 2 Dimensions, designation See pages 2 and 3 for illustrations, de

6、signations and tables of dimensions. 3 Material The specifications of DIN 15 400 shall apply. Ramshorn hooks conforming to this standard should predominantly be of strength classes M or P. 4 Finish Surface finish: forged and descaled. Permissible deviations: in accordance with tables 2 and 3. Local

7、indentations are permissible on the hook shank and on the transition to the curved back. The nega- tive deviation for such indentations shall be half of the positive deviation for dl in accordance with tables 2 and 3. See DIN 15 402 Part 2 for finished parts with threaded shank. 5 Technical delivery

8、 conditions The specifications in accordance with DIN 15 404 Part 1 shall apply. Continued on pages 2 to 4 Soie sale rights of German Standards (DIN-Normen) are with Beuth Veria0 QmbH. Beriln 30 07.83 DIN 15 402 Part 1 Engl. Price group 4 Saler No. 0104 Page 2 DIN 15 402 Part 1 2 Dimensions, designa

9、tion Unmachined parts (RI for drop forged and hammer forged ramshorn hooks with or without noses Type RS for drop forged (S) ramshorn hooks Nos. 05 to 40 without noses Type RSN for drop forged (S) ramshorn hooks Nos. 05 to 40 with noses (N) Type RF for hammer forged (F) ramshorn hooks Nos. 10 to 250

10、 without noses Type RFN for hammer forged (F) ramshorn hooks Nos. 10 to 250 with noses (N) Types RS and RF i61 i Marking in accordance with DIN 15 404 Part 1 Types RS and RSN Types RF and RFN Section (enlarged) Types RSN and RFN Marking and remaining dimensions as for types RS and RF Types SSN and R

11、FN Detail X Section C - D I Designation of a type RF ramshorn hook No. 100 of strength class M: Should lengths 1, differing from those specified in table 1 be required in exceptional cases, e. g. for use in conjunction with existing lifting appliances, this must be specified on ordering. The designa

12、tion shall then read as follows, e. g. for 1, = 1500 mm: Ramshorn hook DI N 15 402 - R F 1 O0 - 1500 M Ramshorn hook DIN 15 402 - RF 100 - M DIN 15 402 Part 1 Page 3 Rams- horn hook No. 05 08 Table 1. Dimensions of types RS, RSN, RF and RFN ramshorn hooks Weight in kg % ai a2 a3 bi di e fi f2 f3 ? h

13、 11 ri r2 73 r4 r5 for type 34 27 44 22 24 80 130 20 12 10 27 165 3 3 36 6 1,6 1,8 1,9 - - 38 30 49 26 30 83 150 22 12 10,5 33 183 4 3 41 6 1,6 2,5 2,6 - - RS RSN RF RFN Ramshorn hook No. 05 to 2.5 4 and 5 1 1.6 2.5 4 5 i6 8 i 10 i 12 m 16 i 20 25 rn 32 i 40 50 i 63 Permissible deviations for dimens

14、ions ai I a2 I a3 I bi I di I e I fi I f2 I h I li g 1 f3 +3 +1 O O +4 +2 O O 112 I 90 I 146 I 95 1 95 I237 I 471 I 69 I 36 I28 125 I 100 I 163 1 106 I 106 I265 I 531 I 75 I 36 I 33 I118 I 580 114 111 11321 16 14,O I 67,6 I 69,7 I 1 132 I 650 116 112.51 150 I 16 I4,O I 95 I 973 I 69 I 71,l 97 I 993

15、6 and 8 10 to 16 140 I112 I182 I118 I118 I315 I 598 I 86 I 45 I33 160 1 125 1 205 I 132 1 132 1 335 1 672 I 94 1 45 1 38 I150 I 715 118 114 11701 20 I5,O I 132 1 170 1 790 (20 (16 (190 1 20 15,O 1 189 I 135 I 135 I 138 I 193 1 193 I 197 +5 +2 O O +8 +4 O O 180 140 230 150 150 375 754 104 45 38 190 8

16、85 22 18 212 20 5,O 274 280 280 286 200 160 260 170 170 420 842 120 56 42 212 965 25 20 236 25 6,O 388 394 - 224 180 292 190 190 460 944 131 56 42 236 1090 28 22 265 25 6,O 539 547 - - - al I a2 a3 + 10 + 12 0 f 8 0 f10 +le O f12 +20 O f16 +2: +20 rn 80 h 4 I f2 e I g I f3 h I 11 + 8 6. O O +1g O O

17、+28 O O O +28 O O O +y + 2; + 18 + 48 + 10 +4 + 20 O +12 +5 + 16 +6 + 24 + 20 +a + 32 i 100 i 125 i 160 m 200 250 250 200 325 212 212 515 1062 144 56 45 265 1235 32 25 300 25 6,O - 750 759 - 280 224 364 236 236 575 1186 157 56 45 300 1375 36 28 335 25 6.0 - 1050 1060 - 315 250 408 265 265 645 1330 1

18、78 68 50 335 1550 40 32 375 30 8,0 - 1480 1491 - 355 280 458 300 300 725 1505 198 68 50 375 1745 45 36 425 30 8,O - 2100 2115 - 400 315 515 335 335 800 1685 218 68 55 425 1998 50 40 475 30 8,O - 3000 3015 - 450 355 580 375 375 875 1885 240 68 55 475 2250 56 45 530 30 8.0 - 4250 4268 - I i Specially

19、selected for production cranes, e. g. steel workscranes androlling mill cranes Table 2. Permissible deviations for types RS and RSN ramshorn hooks I I 8 I +8 20 to 40 I O _ Table 3. Permissible deviations for types RF and RFN ramshorn hooks Rarnshor n hook No. loto 16 20to 32 40to 63 80 to 125 160 t

20、o 250 Page 4 DIN 15 402 Part 1 Standards referred to DIN 15 400 Lifting hooks for lifting appliances; mechanical properties, lifting capacities, actual stresses and materials DIN 15 402 Part 2 Lifting hooks for lifting appliances; ramshorn hooks; finished parts with threaded shank DIN 15 404 Part 1

21、Lifting hooks for lifting appliances; technical delivery conditions for forged lifting hooks DIN 15 407 Part 1 Lifting hooks for cranes; laminated single hooks for hot-metal ladlesandsteel casting ladles, synopsis, dimensions DIN 15 407 Part 2 Lifting hooks for cranes; laminated single hooks for hot

22、-metal ladles and steel casting ladles, indivi- dual components DIN 15411 Lifting appliances; lifting hook suspensions for bottom sheaves Further standards DIN 15 401 Part 1 DIN 15 401 Part 2 Lifting hooks for lifting appliances; single hooks; unmachined parts Lifting hooks for lifting appliances; s

23、ingle hooks; finished parts with threaded shank Previous editions DIN 699: 02.33, 11.43; DIN 15402Part 1: 07.70 Amendments The following amendments have been made as compared with the July 1970 edition: a) DIN 15 400 has been adopted as the basis for material specifications and for the correlation o

24、f the lifting capacities to b) The series of drop forged ramshorn hooks has been extended to include hooks up to hook No. 40 inclusive. ci For hammer forged and drop forged ramshorn hooks the type with nose (N) has been included. d) Hammer forged ramshorn hooks of size Nos. 6 and 8 have been dispensed with. e) The standard has been completely revised editorially. the strength class and to the driving gear groups. International Patent Classif ication B 66 C 1/34