CGSB 4 2 NO 41-M91-CAN CGSB-1991 Textile Test Methods Standard Light Sources for Colour Matching of Textiles《纺织品试验方法 纺织品配色的标准光源》.pdf

《CGSB 4 2 NO 41-M91-CAN CGSB-1991 Textile Test Methods Standard Light Sources for Colour Matching of Textiles《纺织品试验方法 纺织品配色的标准光源》.pdf》由会员分享，可在线阅读，更多相关《CGSB 4 2 NO 41-M91-CAN CGSB-1991 Textile Test Methods Standard Light Sources for Colour Matching of Textiles《纺织品试验方法 纺织品配色的标准光源》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、CGSB CAN/CGSB-4-2 NO.4L-MSL Xt 1874650 0011503 391 = r NATJONAL STANDARD OF CANADA CAN/CGSB-4.2 L NO. 41-M91 Textile Test Methods Standard Light Sources for Colour Matching of Textiles Canadian General Standards Board Copyright Canadian General Standards Board Provided by IHS under license with CGSB

2、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB-4-2 N0=41-M9L *Y D LB74b50 0011504 228 9 c The CANADIAN GENERAL SCANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within the Federal Department of Suppl

3、y and SeMces. The CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process The standards committees are composed of representatives of relevant interests including producers, consumers and other user

4、s, retailers, governments, educational institutions, technical, profesional and trade societies, and research and testing organizations Any given standard is developed on the consensus of views expressed by such representatives. The Ministers Advisory Council on CGSB revi“ the results of the consens

5、us P-. The CGSB has been accredited by the Standards Council of Canada as a national standards-writing organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In ad

6、dition to standards it publishes as national standards, the CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and national standards developed by the CGSB are developed in conformance with t

7、he policies described in the Policy Manual for the Development and Maintenance of Standards by CGSB. CGSB standards are subject to review and reon at any time, so as to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be bro

8、ught to the notice of the standards committees concerned. Changes to standards are bued either as separate amendment sheets or in new editions of standards. An uptodate listing of CGSB standards, including details on latest bues and amendments, and ordering instructions, will be found in the CGSB Ca

9、talogue which is published annually and is available without charge upon request. Although the intended primary application of this standard is stated in its Scape, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular p

10、urpose. Many tests required by CGSB standards are inherently hazardous. nie CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. The CGSB takes no position respxting the validity of any patent rights asserte

11、d with any item connected with this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility. Further information on the CGSB and its seMces and standards may be obtained from: The Secretary Canadian Gen

12、eral Standards Board Ottawa, Canada KIA 1C The STNARDS COUNCIL OF CANADA is the coordinating body i the National Standards System, a federation of independent, autonomoi organizations working towards the further development and improvement of voluntary standardization in the national interest. The p

13、rincipal objectives of the Council are to foster and promotevoluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering internatio

14、nal cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide, to the greatest pract

15、icable extent, a balance of reprcsentation of producers, users, consumers and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard that is capable of making a significant and timely contribution to the nationai interest. Approval of a standard as a

16、National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsiibiliy of the adited standards-writing organization. Tho

17、se who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving Na

18、tional Standards of Canada rests with the : Standards Council of Canada 350 Sparks Street Ottawa, Ontario KIP 6N7 How to order &* Publications: by Telephone - (819) 956-0425 or by Telefax - (819)956-5644 byMail - CGSBSales - (819) 956-0426 Ottawa, Canada KM 1G6 in Person - Place du Portage III, 9C1

19、11 Laurier Street Hull, Qubec Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB-4.2 NOm41-fl91 XX 1874650 0011505 164 NATIONAL STANDARD OF CANADA CANICGSB-4.2 NO. 41-M91 T

20、EXTILE TEST METHODS STANDARD LIGHT SOURCES FOR COLOUR MATCHING OF TEXTILES This method supersedes issue of July 1977. Approved by the Standards Council of Canada P & Prepared by the Canadian General Standards Board ss Published November 1991 by the Canadian General Standards Board Ottawa, Canada K1A

21、 1G6 Minister of Supply and Services Canada - 1991 No pari of this publication may be reproduced in any fomi without the prior permission of the publisher. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without

22、license from IHS-,-,-CGSB CAN/CGSB-Y=Z NO-YL-HSL * 1874650 0011506 OTO Crown, E.M. Biron, C. Clarke, N. Demers, A. Dolhan, P. Edwards, D.S. Graham, M. Grgoire, M. Hurley, M. Kasem, M.A. King, M. Knapp, C. Mitton, M.T. Monk, W.B. Mortimer, R. Muniak, E. Patel, A. Rashid, M.A. Routhier, D. Sanders, B.

23、A. Scrafmn, K. White, J. Wishart, P. CANADIAN GENERAL STANDARDS BOARD COMMITTEE ON TEXTILE TEST METHODS (Membership at date of approval) Chairperson University of Alberta Celanese Canada Inc. Du Pont Canada Inc. Professional Association of Cleaners and Launderers of Quebec Department of National Def

24、ence Canadian Carpet Institute The Wool Bureau of Canada Ltd. Dominion Fabrics Inc. Department of National Revenue (Customs and Excise) Department of Consumer and Corporate Affaks University of Manitoba Department of Consumer and Corporate Affairs Consultant Consultant ORTECH International The T. Ea

25、ton Co. Canada Ltd. Sears Canada Inc. Department of Public Works, Alberta Consoltex Inc. Department of Supply and Services The Retail Research Foundation of Canada Patons and Baldwins (Canada) Inc. Technitrol Canada Ltd. Randall, J. Secretary Canadian General Standards Board Acknowledgment is made f

26、or the French translation of this National Standard of Canada by the Translation Bureau of the Department of the Secretary of State. C ANKGSB-43 NO. 41-M91 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without

27、license from IHS-,-,-CGSB CAN/CGSB-4.2 N0*41-!9L * = 1874650 001L507 T37 TEXTILE TEST METHODS Ottawa National Standard of Canada CANKGSB-4.2 Canada K1A 1G6 Standard Light Sources for Colour Matching of Textiles NO. 41-M91 1. 1.1 1.2 1.3 2. 2.1 3. 3.1 3.1.1 3.1.2 3.1.3 3.2 4. 4.1 4.2 Supersedes Issue

28、 of July 1977 FOREWORD This method provides for colour assessment under three common types of lighting conditions. Previous issues of this method contained only one type of light source. For standards and specifications dated previous to 1989, only the north-sky daylight conditions shali be used. PU

29、RPOSE AND SCOPE This method describes a procedure developed for colour matching of textiles. Three different types of light sources are provided. These are intended to simulate north-sky daylight, incandescent lighting and commercial (minus red) fluorescent lighting. The testing and evaluation of a

30、product against this method may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this method has the responsibility to consult the appropriate authorities and to establish app

31、ropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use. PRINCIPLE Colours are assessed with specified light incident on the fabric at a prescribed angle. APPARATUS Light Source For North-Sky Daylight - C75 full spectrum fluorescent t

32、ube with a colour temperature of 7500 tr 700 K. For Incandescent Lighting - Incandescent bulbs having a colour temperature of 2300 I 200 K (Note 1). For Minus Red Fluorescent Lighting - Cool white fluorescent tube having a correlated temperature of 4400 f 300 K. Viewing Booth (Note 2) PROCEDURE Matc

33、hing shali be Bone under an illumination of not less than 600 lx and not more than 3200 lx. The light is incident upon the viewing surfaces at an angle of approximately 45“, and the direction of viewing is approximately along the perpendicular to the plane of the surfaces. Note 1: This is the type o

34、f light obtainedfrom household-type incandescent bulbs with 110 to 120 V rating when operated at half voltage. Note 2: The Macbeth booth is available from J.B. Atlas Company, 9 Canso Drive, Rendale, Ontario M9W 4L9. 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSB

35、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-4.3 4.4 5. 5.1 5.2 2 CGSB CAN/CGSB-4-2 NOm41-Pl91 * 1874650 OOL1.508 973 It is recommended that other light be excluded by a booth extending from table level to the level of the lower surface of the light source, and

36、arranged so that the light source is not directly visible to the operator. The side and rear walls of the booth should be painted neutral grey matching Munsell N5 as closely as possible. The table or surface on which the matching is done shall be either: coloured grey of a depth of shade similar to

37、that of the textiles being matched or covered with a textile material of similar type and colour to those being matched. REPORT Report the following information: The type of light source The number of this method: CANKGSB-4.2 No. 41-M91. NO. 41-M91 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-