CAN CSA-C22 2 NO 257-2006 Interconnecting inverter-based micro-distributed resources to distribution systems (First Edition).pdf

《CAN CSA-C22 2 NO 257-2006 Interconnecting inverter-based micro-distributed resources to distribution systems (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C22 2 NO 257-2006 Interconnecting inverter-based micro-distributed resources to distribution systems (First Edition).pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、CAN/CSA-C22.2 No. 257-06A National Standard of Canada(reaffirmed 2011)Interconnecting inverter-based micro-distributed resources to distribution systemsLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by

2、 the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve co nsensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test,

3、evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, wi thout limitation, implied warranties or conditions concerning this documents fitness for a

4、 particular purpose or use, its mer chantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this doc

5、uments compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIA TED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT , INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOE

6、VER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT , TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY , ARISING OUT OF OR RESUL TING FRO

7、M ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or ent

8、ity or to perform any duty owed by any person or entity to another person or entity . The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilit y whatsoever arising in any way from any and all u

9、se of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntar y standards and related documents. CSA has no power , nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Inte

10、llectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner of all works cont ained herein that are protected by copyright, all trade-marks (except as other wise noted to the contrary), and all inventions and tra

11、de secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA s intellectual property and may giv

12、e rise to a right in CSA to seek legal redress for such use, modification, copying, or disclosure. CSA rese rves all intellectual property rights in this document.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this doc

13、ument is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to pe

14、rsons who are authorized by CSA to have suc h copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from C

15、SA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately . Use

16、 of this document constitutes your acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceCAN/CSA-C22.2 No. 257-06March 2006Title:Interconnecting inverter-based micro-distributed resources to distribution systemsPagination:35 pages (viii preliminary and 27 text), eac

17、h dated March 2006To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2018609.If you require assistance

18、, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accred

19、ited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufact

20、urers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and c

21、onstruction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 com

22、mittee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of

23、and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch

24、offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activ

25、ities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6Cana

26、daThe Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects of the Council are t

27、o foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in the field of standa

28、rds. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the greatest practicable extent a balance of representati

29、on of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates

30、that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards development organization. Those who have a need to apply st

31、andards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard.The responsibility for approving National Standards of Canada rest

32、s with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibi

33、lity of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationApproved byStandards Council of CanadaNational Standard of CanadaPublished in March 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060 Sp

34、ectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-C22.2 No. 257-06Interconnecting inverter-based micro-distributed resources to distributionsystemsPrepared byISBN 1-55436-119-2Technical Editor:Michael Henville Canadi

35、an Standards Association 2006All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.March 2006 iiiContents Canadian Standards AssociationInterconnecting inverter-based micro-distributedresourcesto distributionsystemsTec

36、hnical Committee on Interconnection of Inverter-Based Distributed Generation Technologies vPreface viiForeword viii1Scope12 Reference publications 13 Definitions 24 General requirements 45 Interconnection and protection requirements 55.1 General 55.2 Distribution system operating conditions 55.2.1 G

37、eneral 55.2.2 System frequency 55.2.3 System voltage 55.2.4 Flicker 65.2.5 Voltage distortion 65.2.6 Voltage unbalance 65.2.7 Fault levels 75.2.8 System grounding 75.2.9 Fault and line clearing 75.2.10 Voltage and current surges 75.3 Interconnection system 75.3.1 General 75.3.2 Safety 75.3.3 Point o

38、f common coupling Resp onsibilities and quantity measurement 75.3.4 Point of disconnection Safety 85.3.5 Phasing 85.3.6 Interconnection grounding 85.3.7 Interrupting device ratings 85.3.8 Overcurrent protection 85.3.9 Over-voltage and under-voltage protection 85.3.10 Over-frequency and under-frequen

39、cy protection 85.3.11 Anti-islanding 95.3.12 Voltage regulation 95.3.13 Power factor 95.3.14 Flicker 95.3.15 Harmonics 95.3.16 Voltage unbalance 95.3.17 DC injection 95.3.18 Energizing the distribution system 95.3.19 Protection from electromagnetic interference 95.3.20 Surge withstand performance 10

40、5.3.21 Synchronization 105.3.22 Data telemetry 105.3.23 Interconnection protection settings (IPS) 10CAN/CSA-C22.2 No. 257-06 Canadian Standards Associationiv March 20066 Revenue metering 107 Inspection, testing, and commissioning 107.1 General 107.2 Protection data 107.3 Protective function testing

41、117.4 Commissioning and verification testing 117.4.1 Verification test 117.4.2 Verification of final protection settings 117.4.3 Hardware or software changes 128 Maintenance and operation 12AnnexesA(informative) Interconnection protection settings (IPS) 13B(informative) Single li ne diagrams for typ

42、ical micro-DR technologies 15C(informative) Miscellaneous tables 21D(informative) Protection requirements 24E(informative) Commentary on anti-islanding 26F (informative) Inverter classification and operating mode 27Tables1 Recommended service voltage variation limits 6Figures1 Relationships between

43、the micro-DR sy stem and other interconnection terms 4 Canadian Standards AssociationInterconnecting inverter-based micro-distributedresourcesto distributionsystemsMarch 2006 vTechnical Committee on Interconnection of Inverter-Based Distributed Generation TechnologiesJ.P. Neu Electro-Federation Cana

44、da,Mississauga, OntarioChairR. Barkshire AWE Inc.,Toronto, OntarioP. Baroutis Toronto Hydro,Toronto, OntarioL. Bassim BC Hydro,Vancouver, British ColumbiaK.S. Brightwell Electrical Safety Authority,Belleville, OntarioL. de Silva Standards Council of Canada,Ottawa, OntarioAssociateP. Drewes Sol Sourc

45、e Engineering,Newmarket, OntarioB. Dreyer Calgary, AlbertaConsultantS. Grubbe Calgary, AlbertaConsumer representativeG. Howell Howell-Mayhew Engineering Incorporated,Edmonton, AlbertaE. Le Courtois LTE Hydro-Qubec,Shawinigan, Qubec J. Ma Hydro One Networks Inc.,Toronto, OntarioS. Martel Natural Reso

46、urces Canada,Varennes, Qubec R. McDiarmid Xantrex Technology Inc.,Burnaby, British ColumbiaR. McMonagle Canadian Solar Industries Association,Ottawa, OntarioS. Paulsen New Brunswick Department of Public Safety,Fredericton, New BrunswickCAN/CSA-C22.2 No. 257-06 Canadian Standards Associationvi March

47、2006W.R. Ruhnke Ruhnke Consulting Inc.,Pickering, OntarioJ. Savage Ontario Ministry of Energy,Toronto, OntarioV. Scaini Hamilton, OntarioS. Whittaker Canadian Wind Energy Association,Ottawa, OntarioM. Henville CSA,Mississauga, OntarioProject Manager Canadian Standards AssociationInterconnecting inve

48、rter-based micro-distributedresourcesto distributionsystemsMarch 2006 viiPrefaceThis is the first edition of CAN/CSA-C22.2 No. 257, Interconnecting inverter-based micro-distributed resources to distribution systems. It is one of a series of Standards issued by the Canadian Standards Association unde

49、r Part II of the Canadian Electrical Code. It is written in SI(metric) units. For general information on the Standards of the Canadian Electrical Code, PartII, see the preface of CAN/CSA-C22.2 No.0.This Standard was prepared by the Technical Committee on Interconnection of Inverter-Based Distributed Generation Technologies, under the jurisdiction of the Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee. It has been approved as a National Standard of Canada by the Stan