BS ISO IEC 29341-24-1-2017 Information technology UPnP Device Architecture Internet gateway device control protocol Level 2 Internet gateway device《信息技术 UPnP设备体系结构 互联网网关设备控制协议 第2级 .pdf

《BS ISO IEC 29341-24-1-2017 Information technology UPnP Device Architecture Internet gateway device control protocol Level 2 Internet gateway device《信息技术 UPnP设备体系结构 互联网网关设备控制协议 第2级 .pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29341-24-1-2017 Information technology UPnP Device Architecture Internet gateway device control protocol Level 2 Internet gateway device《信息技术 UPnP设备体系结构 互联网网关设备控制协议 第2级 .pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、Information technology UPnP Device ArchitecturePart 24-1: Internet gateway device control protocol Level 2 Internet gateway deviceBS ISO/IEC 29341-24-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPnP Device Architecture Part 24-1: Inte

2、rnet gateway device control protocol Level 2 Internet gateway deviceTechnologies de linformation Architecture de dispositif UPnP Partie 24-1: Protocole de contrle de dispositif de passerelle Internet Niveau 2 Dispositif de passerelle InternetINTERNATIONAL STANDARDISO/IEC29341-24-1Reference numberISO

3、/IEC 29341-24-1:2017(E)First edition2017-09 ISO/IEC 2017National forewordThis British Standard is the UK implementation of ISO/IEC 29341-24-1:2017.The UK participation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-ordination.A list of organizations represent

4、ed on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90

5、851 4ICS 35.200Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARD

6、BS ISO/IEC 29341241:2017Information technology UPnP Device Architecture Part 24-1: Internet gateway device control protocol Level 2 Internet gateway deviceTechnologies de linformation Architecture de dispositif UPnP Partie 24-1: Protocole de contrle de dispositif de passerelle Internet Niveau 2 Disp

7、ositif de passerelle InternetINTERNATIONAL STANDARDISO/IEC29341-24-1Reference numberISO/IEC 29341-24-1:2017(E)First edition2017-09 ISO/IEC 2017BS ISO/IEC 29341241:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in SwitzerlandAll rights reserved. Unless oth

8、erwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

9、 below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 29341-24-1:2017(E)BS ISO/IEC 29341241:2017ii ISO/IEC 2017 All rights reservedCOPYRI

10、GHT PROTECTED DOCUMENT ISO/IEC 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet,

11、without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.or

12、gISO/IEC 29341-24-1:2017(E)ISO/IEC 29341-24-1:2017(E) ISO/IEC 2017 All rights reserved iii CONTENTS Introduction . 1 1 Scope 1 2 Normative references . 2 3 Terms, definitions, symbols and abbreviated terms . 3 4 Device Model . 4 4.1 Device Type . 4 4.2 Requirements for an Internet Gateway Device . 4

13、 4.3 Device Architecture . 5 4.3.1 Device Requirements 6 4.3.2 Relationships Between Services 7 4.4 Security policies . 8 4.4.1 Access control and user roles 8 4.4.2 General policies 8 4.4.3 WANIPConnection:2 8 4.4.4 WANPPPConnection:1 . 10 4.4.5 WANIPv6FirewallControl:1 . 12 4.4.6 LANHostConfigMana

14、gement:1 13 4.4.7 Layer3Forwarding:1 . 13 4.4.8 WANEthernetLinkConfig:1 13 4.4.9 WANCableLinkConfig:1 14 4.4.10 WANDSLLinkConfig:1 14 4.4.11 WANCommonInterfaceConfig:1 14 4.4.12 WANPOTSLinkConfig:1 15 5 XML Device Description 16 6 Test . 18 Annex A Theory of Operation 19 Figure 1 InternetGatewayDevi

15、ce with LAN and WAN Interfaces 2 Figure 2 InternetGatewayDevice Devices and Services Hierarchy . 5 Table 1 Device Requirements 5 Table 2 Service Descriptions 6 Table 3 Recommended access levels for WANIPConnection:2 actions 8 Table 4 Recommended access levels for WANPPPConnection:1 actions . 10 Tabl

16、e 5 Recommended access levels for WANIPv6FirewallControl:1 actions 12 Table 6 Recommended access levels for LANHostConfigManagement:1 actions 13 Table 7 Recommended access levels for Layer3Forwarding:1 actions 13 Table 8 Recommended access levels for WANEthernetLinkConfig:1 actions 13 Table 9 Recomm

17、ended access levels for WANCableLinkConfig:1 actions 14 Table 10 Recommended access levels for WANDSLLinkConfig:1 actions . 14 Table 11 Recommended access levels for WANCommonInterfaceConfig:1 actions . 14 BS ISO/IEC 29341241:2017ISO/IEC 29341-24-1:2017(E) iv ISO/IEC 2017 All rights reserved Table 1

18、2 Recommended access levels for WANPOTSLinkConfig:1 actions 15 BS ISO/IEC 29341241:2017ISO/IEC 29341-24-1:2017(E) iv ISO/IEC 2017 All rights reserved Table 12 Recommended access levels for WANPOTSLinkConfig:1 actions 15 ISO/IEC 29341-24-1:2017(E) ISO/IEC 2017 All rights reserved v Foreword ISO (the

19、International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees est

20、ablished by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In th

21、e field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria neede

22、d for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

23、rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name

24、 used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of Standard, the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence

25、 to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 29341241 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approva

26、l by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. BS ISO/IEC 29341241:2017ISO/IEC 29341-24-1:2017(E) vi ISO/IEC 2017 All rights reserved In

27、troduction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of -these patent rights have assured

28、 ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Intel Corporation has informed IEC and IS

29、O that it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft Corporation has informed IEC and ISO that it has patent applications or granted patents

30、 as listed below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent app

31、lications or granted patents. Information may be obtained from: Philips International B.V. IP 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips Inte

32、rnational B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard

33、 Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742

34、 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Building, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it

35、has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Telecom Italia S.p.A. V

36、ia Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Attention is drawn to the possibility that some of the elements of this d

37、ocument may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. BS ISO/IEC 29341241:2017ISO/IEC 29341-24-1:2017(E) viii ISO/IEC 2017 All rights reserved Original UPnP Document Reference may be mad

38、e in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation and later by UPnP Forum. The following table indicates the original UPnP document titles and the corre

39、sponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device Architecture 1.1 ISO/IEC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basic:1 Device IS

40、O/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP ContentDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341

41、-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2008 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11

42、:2008 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2011 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2008 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2011 UPnP ScheduledRecording:1 ISO/IEC 29341-4-14 UPnP ScheduledRecording:2 ISO

43、/IEC 29341-4-14:2011 UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2 UPnP MediaServer:2 Device ISO/IEC 29341-4-3 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2008 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2011 UPnP DigitalSecurityCamera:1 Device ISO/IEC 29341-5-1 UPnP DigitalSecurityCam

44、eraMotionImage:1 Service ISO/IEC 29341-5-10 UPnP DigitalSecurityCameraSettings:1 Service ISO/IEC 29341-5-11 UPnP DigitalSecurityCameraStillImage:1 Service ISO/IEC 29341-5-12 UPnP HVAC_System:1 Device ISO/IEC 29341-6-1 UPnP ControlValve:1 Service ISO/IEC 29341-6-10 UPnP HVAC_FanOperatingMode:1 Servic

45、e ISO/IEC 29341-6-11 UPnP FanSpeed:1 Service ISO/IEC 29341-6-12 UPnP HouseStatus:1 Service ISO/IEC 29341-6-13 UPnP HVAC_SetpointSchedule:1 Service ISO/IEC 29341-6-14 UPnP TemperatureSensor:1 Service ISO/IEC 29341-6-15 UPnP TemperatureSetpoint:1 Service ISO/IEC 29341-6-16 UPnP HVAC_UserOperatingMode:

46、1 Service ISO/IEC 29341-6-17 UPnP HVAC_ZoneThermostat:1 Device ISO/IEC 29341-6-2 BS ISO/IEC 29341241:2017ISO/IEC 29341-24-1:2017(E) viii ISO/IEC 2017 All rights reserved Original UPnP Document Reference may be made in this document to original UPnP documents. These references are retained in order t

47、o maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation and later by UPnP Forum. The following table indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Arch

48、itecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device Architecture 1.1 ISO/IEC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/

49、IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP ContentDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2008 UPnP AVTransport:2 S