BS ISO 19378-2003 Lubricants industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications《润滑剂、工业用油和相关产品(L级) 机床润滑剂 种类和规范》.pdf

《BS ISO 19378-2003 Lubricants industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications《润滑剂、工业用油和相关产品(L级) 机床润滑剂 种类和规范》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 19378-2003 Lubricants industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications《润滑剂、工业用油和相关产品(L级) 机床润滑剂 种类和规范》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 19378:2003 Lubricants, industrial oils and related products (class L) Machine-tool lubricants Categories and specifications ICS 75.100 BS ISO 19378:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 26 March 2003 BSI

2、 26 March 2003 ISBN 0 580 41498 1 National foreword This British Standard reproduces verbatim ISO 19378:2003 and implements it as the UK national standard. It supersedes BS 5063:1992 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PTI/7, Lubricants an

3、d process fluids, to Subcommittee PTI/7/5, Machine tool lubricants, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in

4、this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a

5、contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposa

6、ls for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 10, an inside back cover and a back

7、cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 19378:2003(E)INTERNATIONAL STANDARD ISO 19378 First edition 2003-03-01 Lubricants, industrial oils and related product

8、s (class L) Machine-tool lubricants Categories and specifications Lubrifiants, huiles industrielles et produits connexes (classe L) Lubrifiants pour machines outils Catgories et spcifications BSISO19378:2003BSISO19378:2003iiIS:87391 O3002(E) I SO 3002 All irhgts seredevr iiiContents Page Foreword iv

9、 1 Scope 1 2 Normative references . 1 3 Sampling 2 4 Categories of products for the lubrication of machine tools Criteria for the choice 3 5 Specifications of products. 3 6 Packaging and labelling . 3 Annex A (informative) Preliminary information about the future International Standard for specifica

10、tions of greases . 9 Bibliography . 10 BSISO19378:2003iiiIS:87391 O3002(E) vi I SO 3002 All irhgts seredevrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is no

11、rmally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in

12、 the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepa

13、re International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that so

14、me of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 19378 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants, Subcommittee SC 4, Classifications and specifications.

15、 This first edition cancels and replaces both ISO/TR 3498:1986 and ISO/TR 10481:1993, which have been technically revised. BSISO19378:2003ivINTENRATIONAL TSANDADR IS:87391 O3002(E)I SO 3002 All irhgts seredevr 1Lubricants, industrial oils and related products (class L) Machine-tool lubricants Catego

16、ries and specifications WARNING The handling and use of products specified in this International Standard may be hazardous, if suitable precautions are not observed. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility o

17、f the users of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1 Scope This International Standard provides the manufacturers and users of machine tools with criteria for the choice among the various categorie

18、s of lubricants and gives specifications for these lubricants. This International Standard facilitates the application of ISO 5169 relating to the presentation of lubrication instructions for machine tools. 2 Normative references The following referenced documents are indispensable for the applicati

19、on of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1817:1999, Rubber, vulcanized Determination of the effect of liquids ISO 2160:1998, Petroleum products Corrosivenes

20、s to copper Copper strip test ISO 2592:2000, Determination of flash and fire points Cleveland open cup method ISO 2719:2002, Determination of flash point Pensky-Martens closed cup method ISO 2909:2002, Petroleum products Calculation of viscosity index from kinematic viscosity ISO 3016:1994, Petroleu

21、m products Determination of pour point ISO 3104:1994, Petroleum products Transparent and opaque liquids Determination of kinematic viscosity and calculation of dynamic viscosity ISO 3104:1994, Technical Corrigendum 1:1997 ISO 3170: 1) , Petroleum liquids Manual sampling ISO 3448:1992, Industrial liq

22、uid lubricants ISO viscosity classification ISO 3675:1998, Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method 1) To be published. (Revision of ISO 3170:1988) BSISO19378:20031IS:87391 O3002(E) 2 I SO 3002 All irhgts seredevrISO 4259:1992, Petroleum pro

23、ducts Determination and application of precision data in relation to methods of test incl. Tech. Cor. 1:1993 (English only) ISO 4263-1:2003, Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part: Procedure for mineral oils ISO 5169:1977, Mac

24、hine tools Presentation of lubrication instructions ISO 6247:1998, Petroleum products Determination of foaming characteristics of lubricating oils ISO 6614:1994, Petroleum products Determination of water separability of petroleum oils and synthetic fluids ISO 6618:1997, Petroleum products and lubric

25、ants Determination of acid or base number Colour- indicator titration method ISO 6743-1:2002, Lubricants, industrial oils and related products (class L) Classification Part 1: Family A (Total loss systems) ISO 6743-2:1981, Lubricants, industrial oils and related products (class L) Classification Par

26、t 2: Family F (Spindle bearings, bearings and associated clutches) ISO 6743-4:1999, Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) ISO 6743-6:1990, Lubricants, industrial oils and related products (class L) Classification Part 6: Family

27、 C (Gears) ISO 6743-9:2003, Lubricants, industrial oils and related products (class L) Classification Part 9: Family X (Greases) ISO 6743-13:2002, Lubricants, industrial oils and related products (class L) Classification Part 13: Family G (Slideways) ISO 6743-99:2002, Lubricants, industrial oils and

28、 related products (class L) Classification Part 99: General ISO 7120:1987, Petroleum products and lubricants Petroleum oils and other fluids Determination of rust- preventing characteristics in the presence of water ISO 11158:1997, Lubricants, industrial oils and related products (class L) Family H

29、(Hydraulic systems) Specifications for categories HH, HL, HM, HR, HV and HG ISO 12925-1:1996, Lubricants, industrial oils and related products (class L) Family C (Gears) Part 1: Specifications for lubricants for enclosed gear systems ISO 12925-1:1996, Technical Corrigendum 1:2002 XP T 60-183:1994, L

30、ubricants, industrials oils and related products Lubricants for slideways Anti-slick slip lubricating ability ASTM D4172-94, Standard test method for wear preventive characteristics of lubricating fluid (Four-ball method) 3 Sampling Unless otherwise specified in a commodity specification, samples of

31、 lubricants shall be taken in accordance with ISO 3170. BSISO19378:20032IS:87391 O3002(E) I SO 3002 All irhgts seredevr 34 Categories of products for the lubrication of machine tools Criteria for the choice The various mechanical parts of machine tools shall be lubricated with certain families of pr

32、oducts defined and described in ISO 6743-1, ISO 6743-2, ISO 6743-4, ISO 6743-6, ISO 6743-9, ISO 6743-13 and ISO 6743-99. Each part of ISO 6743 defines categories inside a lubricant family. Within each category, all the grades defined in accordance with ISO 3448 for liquid lubricants or ISO 6743-9 fo

33、r greases are possible. For the lubrication of machine tools, all the categories of products and all the possible grades in each category are not useful. Therefore, to facilitate the selection by the manufacturers or the users of machine tools, it is advisable to limit the number of categories and g

34、rades of products. Table 1 gives criteria for the applications and defines a limited range of products appearing underlined. It is recommended to the manufacturers of machine tools, whenever possible, to select the lubricants in the limited range. Table 1 does not cover special applications requirin

35、g the use of specific lubricants. These special applications should be examined separately, case by case, by the manufacturers or users of machine tools. 5 Specifications of products The products of Family H, classified in ISO 6743-4, are specified in ISO 11158 and the products of Family C, classifi

36、ed in ISO 6743-6, are specified in ISO 12925-1. There is presently no specification covering the products of Family X, classified in ISO 6743-9. NOTE At the time of publication of this International Standard, an International Standard for specifications of greases is in the course of development at

37、the preliminary stage (see Annex A). Table 2 gives the requirements of the categories of lubricants L-AN (ISO 6743-1), L-FC and L-FD (ISO 6743-2) and L-G (ISO 6743-13) covered by Table 1. The properties are those applying to the products at the time of their delivery. The application of the accuracy

38、 in interpreting the results of tests is described in ISO 4259. This procedure shall be applied in case of dispute. 6 Packaging and labelling 6.1 Packaging The lubricants shall be packed in suitable packaging and according to the regulations in use. 6.2 Labelling The labelling shall comprise at leas

39、t the following information: a) the commercial name of the product; b) the ISO designation code (including the viscosity grade); c) the batch number; d) the date of manufacturing; e) the legal labelling (transportation, safety) if the product is liable for this labelling. BSISO19378:20033IS:87391 O3

40、002(E) 4 I SO 3002 All irhgts seredevr Table 1 Range of machine-tool lubricants Code letter General application Particular application More specific application Product type and/or performance requirements Symbol ISO L aTypical applications Remarks A Total loss systems Refined mineral oils AN 32 AN

41、68 AN 220 Lightly loaded parts C Gears Enclosed gears Continuous lubrication: splash lubrication, lubrication by circulation or spray Refined mineral oils exhibiting improved properties of oxidation stability, corrosion protection (ferrous and non-ferrous metals), and foaming CKB 32 CKB 68 CKB 100 C

42、KB 150 Enclosed gears, operating under moderate loads (see ISO 6743-6) Bearings, headstocks, feed- boxes, carriages CKB 32 and CKB 68 oils can also be used for flood- lubricated, mechanically controlled clutches CKB 68 may replace AN 68 Refined mineral oils exhibiting improved properties of oxidatio

43、n stability, corrosion protection (ferrous and non-ferrous metals), extreme-pressure, anti-wear and foaming CKC 68 CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 Enclosed gears, whose stabilized temperature of oil in service remains normal or average, and operating under high loads (see ISO 6743-6) All typ

44、es of enclosed gears (except hypoid gears) Heavily loaded plain and roller bearings These oils can also be used for manual or centralized lubrication of lead and feed screws and slideways operating under light loads, or whose conditions of use do not require any particular anti- stick-slip propertie

45、s F Spindle bearings, bearings and associated clutches Spindle bearings, bearings and associated clutches Refined mineral oils exhibiting improved properties of oxidation stability and corrosion protection FC 2 FC 5 FC 10 FC 22 Lubrication by recirculation, splash or oil mist of plain bearings, roll

46、er bearings and associated clutches These oils are intended for the lubrication of parts including clutches. Oils containing extreme-pressure and anti- wear agents are not allowed Spindle bearings, bearings Refined mineral oils exhibiting improved properties of oxidation stability, corrosion protect

47、ion and anti-wear FD 2 FD 5 FD 10 FD 22 Lubrication by recirculation, splash or oil mist of plain bearings and roller bearings These oils can also be used in applications requiring the use of particularly low viscosity oils, such as fine mechanisms, hydraulic or hydropneumatic mechanisms, electro-ma

48、gnetic clutches, airline lubricators and hydrostatic bearings G Slideways Lubrication Lubrication of slideways systems in which the contacting surfaces are both metallic Refined mineral oils exhibiting improved properties of wear protection, corrosion protection, tackiness and preventing discontinuo

49、us or intermittent motion of the slider (stick-slip) GA 68 GA 100 GA 150 GA 220 Lubrication of machine-tool parts including plain slideways, nut-screw systems, ball nut- screw systems, plain bearings, in which anti-stick-slip and friction-reduction properties are essential The GA oils may be replaced by HG oils (ISO 6743-4) of the same viscosity grade, provided that requ