BS ISO 14661-2000 Thermal turbines for industrial applications (steam turbines gas expansion turbines) - General requirements《工业用热涡轮机(蒸气涡轮机、气体膨胀式轮机) 一般要求》.pdf

《BS ISO 14661-2000 Thermal turbines for industrial applications (steam turbines gas expansion turbines) - General requirements《工业用热涡轮机(蒸气涡轮机、气体膨胀式轮机) 一般要求》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 14661-2000 Thermal turbines for industrial applications (steam turbines gas expansion turbines) - General requirements《工业用热涡轮机(蒸气涡轮机、气体膨胀式轮机) 一般要求》.pdf（144页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 14661:2000 Incorporating Amendment No. 1 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements ICS 27.040 BS ISO 14661:2000 This British Standard was published under the authority of the Standards Policy and Strategy Commit

2、tee on 20 November 2003 BSI 20 November 2003 ISBN 0 580 36421 6 National foreword This British Standard reproduces verbatim ISO 14661:2000, including amendment 1:2002 and implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee MCE/13, S

3、team turbines, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. The amendment by which each page of the International Standard was introduced is indicated by an extension to the shoulder heading at the top of the page

4、 (e.g, ISO 14661:2000/A1:2002. Where no such extension appears, the page is part of the original European Standard. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled

5、“International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance wit

6、h a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related internat

7、ional and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to vi, pages 1 to 134, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when

8、the document was last issued. Amendments issued since publication Amd. No. Date Comments 14702 20 November 2003 See national forewordReference number ISO 14661:2000(E) OSI 0002 INTERNATIONAL STANDARD ISO 14661 Firstedition 2000-06-15 Thermal turbines for industrial applications (steam turbines, gas

9、expansion turbines) General requirements Turbines thermiques pour applications industrielles (turbines vapeur, turbines dilatation de gaz) Prescriptions gnrales XXXXYYYY:X 4 ISB 0002-XX ISBN 0 085 24636 1 aNitnoof lareword This Brsitih Stnadadr erprdouces veabrtSI miO 6412:16000ni ,ulcdnig amnedmen:

10、1 t002na 2d implemenst ti sa hte UK naitnola tsnadadr. The UK papicitratoin ni sti preparitaon aws netrusetd yb eThcnilac moCmttiee M1/EC3S ,team utibrnes, whhci has hte erpsonsibtiliy ot: A ilst fo agrointazisno serpertneed on ihts octimmtac eeb ne boatinde on qeruset to its ercesat.yr Crso-serefer

11、cnes The irBtsih tSnadadrs hwhci implmenet nietnritaonal puacilbtoins erfeerrd ot in htsi doucemnt amy be ofi dnun eht SBolataC Igue ednur the setciotne niltde tnI“anretional Stanadsdr CoserrpdnoednI ecne”x, ro yb usnig hte S“aerch” faciliyt of hte tcelE ISBroolataC cineug fo ro BritisS htanadnO sdr

12、ilen. This puacilbtoin does nop tuprorot t niulcdla eht le neecssavorp yrissnoi a fo tnocartc. sUsre are serpnosible ofi rts octcerr tacilppanoi. pmoCliance iwB a htritsitS hd dradnaose fo ton tilesf cotinummi refny l morfelag lboitag.snoi aid neuqriers ot undrestnad tht eext; persetn to the serpsno

13、itni elbetanreporuE/lanoian ocimmttee yna qneuiries on thi enteterpraitno, orp ropsolaof sr hcgnae, ank dpee the UK nietretsi snformde; monotir ertaled nitenratoinaa lnd uEporena deveolpmnets and prmoulaget htem ni thU eK. 189 SIO 8860orteP ,luem produca stnd luirbcanteP strlol mueubrico gnitaf slio

14、( senibrut rcirogetase -OSIST-LSI dna AL-O-icepS AGTtacifoi.sn 199 SIO 809,4 aluclaCtiol fo noapac daticy ups for aacileh dnl pA sraegacilptoit no eps hgihed gesra o sraeg dnaf alimisr iuqertnemers. 200 CEI 006-54,1 Staem P senibruta:1 tr Spficei.snoitac 210 CEI 006-97,0 tcelEacirappa ltarus folpxe

15、ra sag evisotsomp sereh Patr lareneG :0 qeriutnemers. Amendment 1 2002-11-01DPFdcsilremia ihTsPDFfilemayctnoainemeddebdtyfepaces.InaccnadrocewithAebodslicensinglopicy,thisfilemaybepirntedorivewedubtslahlton beidetedlnuessthetyfepaceswhichareemeddebdraelicensedtonadintslaledonthecomputerfrepormingthe

16、ideting.Inodwlnidaongthis feli,trapiesaccepttierehnthesersnoptilibiyofontinfrnignigAebodslicsneniglopicy.hTeISOtneCarlSecterairatacceptsnollibaiityinthis .aera AbodeisatdaremarkofAbodeStsyemsInctaropro.de teDailsofthesfotwraepudorctsusedtocrtaeetihsPDFfilecanbefnuodintheGarenelInfolerativetothefile;

17、theP-FDcerationrapamteers weretpoimizedforpirtning.EvreycraeahseebntakentoensruethatthefileissuitlbaeforusebyISOmemebridobse.Inthelnuikleyetnev tahtaplboremleratingtoitisfdnuo,lpaeseifnormthetneCarlSecterairatattheserddasgivenlebow. ISO0002 Allrgihtsresvrede.lnUesstorehwisescepfieid,noraptofthisilbu

18、pctaoinmaybeudorpercedorutziliedinnayformorbynaysnaem,electnoric ormecinahcal,inclidungtohpociypongnadmicrfoilm,wituohteprmissioninwritingfromeitehrISOattherddaessleboworISOsmemebrydob inthectnuoryofthertseuqee.r ISOcirypohgtfofice aCsesoptale56 121-HC1veneGa20 leT.+41224790111 aFx+41223741097 E-mai

19、lcirypothgiso.ch Webwww.iso.ch ii ISO14661:2000ISO 16641:(0002)E ISO 0002 All irhgts seredevr iii Contents Page Forewordv Introductionvi 1 Scope 1 2 Normative references 1 3 Terms and definitions .3 3.1 Turbines3 3.2 Power output, heat rate and steam rate 3 3.3 Connection points .5 3.4 Steam or gas

20、conditions .5 3.5 Wetness 5 3.6 Mass flow6 3.7 Speeds (see Figure 1).6 3.8 Operating points 7 3.9 Miscellaneous 7 4 Symbols and abbreviations8 5 Enquiry and tender 9 5.1 General9 5.2 Enquiry9 5.3 Tender.9 5.4 Warranty .10 5.5 Safety requirements 10 5.6 Alternative designs10 6 Turbines10 6.1 General1

21、0 6.2 Casings .12 6.3 External forces and moments 12 6.4 Bolted joints .13 6.5 Turbine casing openings for pipe connections13 6.6 Turbine rotor 14 6.7 Casing internals.14 6.8 Inner seals 14 6.9 Balance piston and balance line 14 6.10 Outer shaft seals14 6.11 Bearing and bearing housings.15 6.12 Dyna

22、mics16 6.13 Baseframe (baseplate) and soleplates 18 6.14 Nameplates and rotation arrows18 7 Driven machines, gear units and couplings .19 7.1 Driven machines 19 7.2 Gear units .19 7.3 Couplings .20 7.4 Rotor turning device21 8 Auxiliary equipment 22 8.1 Piping 22 8.2 Inlet strainer and water separat

23、or22 8.3 Electrical systems23 8.4 Condensing plant.23 8.5 Gland steam or gas system23 ISO14661:2000ISO 16641:(0002)E iv ISO 0002 All irhgts serdevre 8.6 Materials for auxiliary equipment.23 8.7 Drainage system of steam turbines .23 8.8 Protection against water flow entering the turbine24 9 Lubricati

24、ng and control oil systems 24 9.1 General24 9.2 Oil types24 9.3 Oil reservoirs24 9.4 Oil system pumps and their drivers.26 9.5 Oil filters28 9.6 Oil coolers.29 9.7 Accumulators .31 9.8 Oil pipework .32 10 Governing system and protecting systems32 10.1 General32 10.2 Speed governing system classifica

25、tion 32 10.3 Speed adjustment 33 10.4 Electrical speed sensors for electric speed governing systems33 10.5 Protection systems33 10.6 Instrumentation36 11 Special tools.38 12 Inspection and testing.38 12.1 General38 12.2 Inspection .39 12.3 Testing 41 13 Preparation for shipment and storage.43 13.1 G

26、eneral43 13.2 Special aspects of preparation.43 14 Foundations .43 15 Erection and commission on site 44 15.1 Preparation on site 44 15.2 Erection on site 44 15.3 Site acceptance test 44 15.4 Personnel training .44 16 Contract documents 44 16.1 Drawings.44 16.2 Technical data 44 16.3 Progress report

27、 45 16.4 Recommended spare parts.45 16.5 Data information for installation, operation and maintenance .45 AnnexA(informative)Explanationsconcerningdynamics47 Annex B (normative) Explanations of terms concerning the governing system .55 Annex C (informative) Further information on foundations61 Annex

28、 D (informative) Data sheets for thermal turbines for industrial applications63 ISO 16641:(0002)E vi ISO 0002 All irhgts seredevr 6.8 Mtaslaire for aixuailry mpiuqetne.32 7.8 Dganiare stsyme fo tseam tenibrus .32 8.8 Ptortcenoi atsniag water fwol etngnire teh tuenibr42 9 gnitacirbuL adn lortnoc oli

29、smetsys 42 1.9 Glarene42 2.9 Oli types42 3.9 Oli serevrsrio42 4.9 Oli sytsem spmup dna tehri rdvisre.62 5.9 Oli ftlisre82 6.9 Oli reloocs.92 7.9 Acctalumuros .13 8.9 Oli wepipokr .23 01 Govegninr system adn torptcegni systems23 1.01 Glarene23 2.01 Sdeep voggninre sytsme alcfissitacnoi 23 3.01 Sdeep

30、tsujdatnem 33 4.01 Etcelacirl sepde sesrosn fro letceirc spdee voggninre stsymes33 5.01 Ptortcenoi systesm33 6.01 Itsnrtnemuatino63 11 icepSla tsloo.83 21 tcepsnInoi adn tetsgni.83 1.21 Glarene83 2.21 Itcepsnnoi .93 3.21 Ttsegni 14 31 perPtaranoi fro tnempihs dna stoegar.34 1.31 Glarene34 2.31 Sicep

31、la astceps of papertarino.34 41 snoitadnuoF .34 51 erEctino dna cmmoinoiss no tise 44 1.51 Pperatarino no tise 44 2.51 Eertcnoi on stie 44 3.51 Stie atpeccance test 44 4.51 Prelennos tragnini .44 61 tnoCtcar tnemucods 44 1.61 Dwarisgn.44 2.61 Tlacinhce tada 44 3.61 Prgorsse troper 54 4.61 Rdnemmoced

32、e apsre parts.54 5.61 Dtaa ifntamroino for itsnallta,noi repoatino dna mtnianeecna .54 nAnex A (ifnromavite) Extanalpsnoi ecnocrgnin dymanisc74 nAnex B n(ormative) nalpxEtasnoi fo temrs ccnogninre the voggninre sytsme .55 nAnex C (ifnromavite) rehtruF noitamrofni on fsnoitadnuo16 Bibliography.125 IS

33、O14661:2000ISO 16641:(0002)E ISO 0002 All irhgts serdevre v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical commit

34、tees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the In

35、ternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member b

36、odies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for

37、 identifying any or all such patent rights. International Standard ISO 14661 was prepared by Technical Committee ISO/TC 208, Thermal turbines for industrial application (steam turbines, gas expansion turbines). AnnexBisanormativepartofthisInternationalStandard.AnnexesAandDareforinformationonly. ISO1

38、4661:2000/A1:2002ISO 16641:(0002)E vi ISO 0002 All irhgts seredevr Introduction This International Standard is a basic standard. Therefore the users of this International Standard should be aware that additional or differing requirements may be needed to meet the needs for the particular service int

39、ended. It is intended to add later, by means of an amendment, an annex containing data sheets appropriate to the text at hand. ISO14661:2000INTENRATIONAL TSANDADR ISO 16641:(0002)E ISO 0002 All irhgts seredevr 1 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) Ge

40、neral requirements 1 Scope This International Standard specifies general requirements intended to facilitate the procurement and supply of steam turbines and gas expansion turbines primarily for industrial applications. This International Standard should serve as a basis for any application although

41、, for special applications, supplementary specifications may also be required, for example for general and special purpose industrial steam turbines used in the petroleum and natural gas industries. This International Standard is applicable to axial- and radial-flow industrial-type turbines (steam t

42、urbines and gas expansion turbines). It specifies the basic requirements for single-stage and multi-stage impulse or reaction turbines, which are not spared or are in critical service. In addition, this International Standard also specifies some requirements for driven machines, gear units, lubricat

43、ion and sealing systems, controls, instrumentation and auxiliary units for turbine plants. Exceptions to the requirements laid down in this International Standard may be agreed between the purchaser and supplier. NOTE 1 Which standard is to be applied in the individual case is the decision of the pu

44、rchaser. For instance, the purchaser of a generator-driving turbine connected to the public network will generally be responsible for complying with the technical requirements of the public network regardless which standard is specified. If the purchaser of a generator-driving turbine is also the op

45、erator of the public network or if he/she is the supplier of an independent power producer (IPP), he/she usually specifies the application of IEC 60045-1. NOTE 2 Further standards on industrial steam turbines for the Petroleum and Natural Gas Industries are ISO 10436 and ISO 10437. Information on ot

46、her relevant International Standards is given in the bibliography. NOTE 3 A bullet at the edge of the text indicates that either a decision is required or further information is to be provided by the purchaser. This information should be indicated on the data sheets (see “Introduction”) otherwise it

47、 should be stated in the quotation request or in the tender. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any o

48、f these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document r

49、eferred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 261, ISO general-purpose metric screw threads General plan. ISO 263, ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0.06 to6in . ISO 1122-1, Glossary of gear terms Part 1: Geometrical definitions. ISO14661:20001ISO 16641:(0002)E 2 ISO 0002 All irhgts seredevr ISO 1127, Stainless