BS EN ISO 11897-2001 Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds《包装 热塑性塑料软薄膜袋 折边处的撕裂扩展试验》.pdf

《BS EN ISO 11897-2001 Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds《包装 热塑性塑料软薄膜袋 折边处的撕裂扩展试验》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 11897-2001 Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds《包装 热塑性塑料软薄膜袋 折边处的撕裂扩展试验》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 11897:2001 Packaging Sacks made from thermoplastic flexible film Tear propagation on edge folds (ISO 11897:1999) The European Standard EN ISO 11897:2001 has the status of a British Standard ICS 55.080 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS

2、 EN ISO 11897:2001 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 2001 BSI 07-2001 ISBN 0 580 37740 7 National foreword This Bri

3、tish Standard is the official English language version of EN ISO 11897:2001. It is identical to ISO 11897:1999. The UK participation in its preparation was entrusted by Technical Committee PKW/5, Primary and transport packaging, to Subcommittee PKW/5/26, Packaging made from flexible material, which

4、has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue unde

5、r the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct ap

6、plication. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;

7、 monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, page ii, pages 1 to 5, and a back cover. The BSI copyright date

8、displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO11897 June2001 ICS55.080 Englishversion PackagingSacksmadefromthermoplasticflexiblefilmTear propagationonedgefolds(ISO

9、11897:1999) EmballagesSacsfaitsdunfilmthermoplastiqueflexible Propagationdeladchiruresurlesplisdebordure(ISO 11897:1999) VerpackungSckeausthermoplastischerKunststofffolie WeiterreifestigkeitanFalzkanten(ISO11897:1999) ThisEuropeanStandardwasapprovedbyCENon11May2001. CENmembersareboundtocomplywiththe

10、CEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexis

11、tsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Fi

12、nland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitati

13、oninanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO11897:2001EgaPe2 INES:79811O1002 Foreword ThetextoftheInternationalStandardfromTechnicalCommitteeISO/TC122“Packaging“of theInternationalOrganizationforStandardization(ISO)hasbeentakenoverasaEuropean StandardbyTechnicalCommi

14、tteeCEN/TC261“Packaging“,thesecretariatofwhichisheld byAFNOR. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublication ofanidenticaltextorbyendorsement,atthelatestbyDecember2001,andconflicting nationalstandardsshallbewithdrawnatthelatestbyDecember2001. AccordingtotheCEN/CENEL

15、ECInternalRegulations,thenationalstandardsorganizations ofthefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium, CzechRepublic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy, Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnited Kingdom. Endo

16、rsementnotice ThetextoftheInternationalStandardISO11897:1999 hasbeenapprovedbyCENasa EuropeanStandardwithoutanymodification. ENISO11897:2001 A Referencenumbe r ISO11897:1999 (E) INTERNATIONAL STANDARD ISO 11897 Firstedition 19990301 PackagingSacksmadefrom thermoplasticflexiblefilmTear propagationone

17、dgefolds EmballagesSacsfaitsdunfilmthermoplastiqueflexiblePropagation deladchiruresurlesplisdebordure ENISO11897:2001 )E(9991:79811OSI OSI9991 Athgirllsserevr.deselnUstosiwrehescepfi,deitraponfothsicilbuptayamnoicudorperebturodezilideniynafomrroybna ymsnae,lecetrinoc .rehsilbupehtmorfgnitirwninoissi

18、mreptuohtiw,mliforcimdnagniypocotohpgnidulcni,lacinahcemro noitazidradnatSrofnoitazinagrOlanoitanretnI 65elatsopesaC 02evneG1121HC dnalreztiwS tenretnI hc.osiosi dnalreztiwSnidetnirP ii Foreword ISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO me

19、mberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO

20、,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirc

21、ulatedtothememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO11897waspreparedbyTechnicalCommitteeISO/TC122, Packaging,Subcommittee SC2, Sacks. AnnexAisforinformationonly. ENISO11897:2001 DRADNATSLANOITANRETNI

22、 OSI )E(9991:79811OSI 1 PackagingSacksmadefromthermoplasticflexiblefilmTear propagationonedgefolds 1Scope ThisInternationalStandardspecifiesamethodforthedetermination,undergivenconditions,oftheresistanceto tearpropagationonanedgefoldofsacksmadefromthermoplasticflexiblefilm.Measurementsonfoldedand un

23、foldedfilmpermitthedeterminationoftheresidualresistanceinthefold. 2Normative references Thefollowingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthese publicationsdono

24、tapply.However,partiestoagreementsbasedonthisInternationalStandardareencouragedto investigatethepossibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.For undatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIEC maintainregistersofcurrentl

25、yvalidInternationalStandards. ISO5273:1995, PlasticsDeterminationoftensilepropertiesPart3:Testconditionsforfilmsandsheets. ISO2233:1994, PackagingCompletefilledtransportpackagesConditioningfortesting. ISO4593:1993, PlasticsFilmsandsheetingDeterminationofthicknessbymechanicalscanning. 3 Termsanddefin

26、itions ForthepurposesofthisInternationalStandard,thefollowingtermsanddefinitionsapply. 3.1 resistancetotearpropagation forcethatopposestearpropagationinatrapezoidalspecimenwithanincisionandaperforationasshownin Figure1 3.2 residualresistance percentagecalculatedbytheequation F fold / F film 100% whe

27、re ENISO11897:2001 ISO11897:1999()E OSI 2 F fold istheresistancetotearpropagationonthefoldofthefilm,innewtons; F film istheresistancetotearpropagationontheunfoldedfilm,innewtons. 4Specimens 4.1 Samplingandpreparationofthespecimens SpecimensasshowninFigure1shallbetakenfromthesectionoffilmorplasticssa

28、cktobetestedsuchthat,inthe caseofspecimensincludingafold,theincisioncoincideswiththeedgefold;specimensnotincludingafoldshallbe cutoutdirectlynexttotheedgefold,andpreferablyonbothsidesofit,sothattheincisionisparalleltothefold. Thespecimensshallbecutorpunchedsothattheedgesaresmoothandfreefromnotches.A

29、templateasshown inannexAisrecommendedforcuttingandmarkingofthespecimens. ForthemarkingasshowninFigure1,inkorothermediumshallbeusedthatdoesnotaffectthematerialunder test. Dimensionsinmillimetres Key 1 edgefold 2 marksforclamps 3 markforperforation 4 perforation 5 incision NOTE Thetransversemarkatthei

30、nnerendoftheincisionfacilitatesperforationofthespecimen. Figure1Specimenfordeterminationofresistancetotearpropagationontheedgefold 4.2 Numberofspecimens Wheneverpossible,fivespecimensshallbetakenforeachedgefoldandanotherfivefortheunfoldedspecimens. ENISO11897:2001 OSI )E(9991:79811OSI 3 5Test appara

31、tus 5.1 Tensiletestingmachine ,inaccordancewithISO5273,wheretheclampsshallallowthespecimenstobe heldatthemarks(seeFigure1).Theclampsshallspanawidthof100mm. 5.2 InstrumentformeasuringthethicknessofthespecimeninaccordancewithISO4593. 6Laboratory atmosphere Thetearpropagationtestshallbeperformedinstand

32、ardconditionGtemperature(23 2) o C,relativehumidity (50 5)%asspecifiedinISO2233:1994. 7Test procedure Conditionthespecimenfor24hinthestandardlaboratoryatmosphere(clause6). Measurethethicknessofthespecimens,closetothebaseoftheincision,onbothsidesoftheedgefoldusingthe methoddescribedinISO4593. Fixthes

33、pecimenintheupperandlowerclampsofthetensiletestingmachine.Themarksonthespecimenshall coincideasaccuratelyaspossiblewiththeedgesoftheclamps.Carryoutthetensiletestatatestspeedof 100mm/min 10%.Noteandrecordthemaximumforceattained. 8Evaluation Calculatethearithmeticmeanfromthehighestvaluesoftheforceinth

34、eindividualtests(calculateseparatemeans forthefoldedandunfoldedfilms).Fortheresistancetotearpropagation,calculatetheresidualresistancefromthe ratioofthetwovaluesobtained,i.e. F fold / F film 100%. 9Test report Thetestreportshallincludethefollowinginformation: a) areferencetothisInternationalStandard

35、; b) natureandidentificationofthetubularfilmortheplasticssacktested; c) dateonwhichthetubularfilmorsackandthespecimenswereproduced; d) numberofspecimens; e) priortreatmentofthespecimensandlaboratoryatmosphere; f) thicknessofthespecimens; g) resistancetotearpropagationoftheedgefold F fold innewtons;

36、h) resistancetotearpropagationofthefilm F film innewtons; i)residual resistance F fold / F film 100%; ENISO11897:2001 ISO11897:1999()E OSI 4 j) anypeculiarbehaviouronthepartofthespecimenduringthetest,e.g.theteardevelopmentandpatternofthe crack; k) anyconditionsdifferingfromthosedescribedinthisIntern

37、ationalStandard; l) dateoftest. ENISO11897:2001 OSI )E(9991:79811OSI 5 AnnexA (informative) Templateforpreparingthespecimens AnexampleofatemplateusedtopreparetestspecimensisshowninFigureA.1. Dimensionsinmillimetres FigureA.1Brasstemplateof2mmto3mmthicknessforpreparingthespecimens ENISO11897:2001 BS

38、EN ISO 11897:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions

39、 British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambigui

40、ty while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers a

41、utomatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In respo

42、nse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through

43、 its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with st

44、andards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transm