BS EN 60598-2-20-2015 Luminaires Particular requirements Lighting chains《灯具 详细要求 灯饰串》.pdf

《BS EN 60598-2-20-2015 Luminaires Particular requirements Lighting chains《灯具 详细要求 灯饰串》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60598-2-20-2015 Luminaires Particular requirements Lighting chains《灯具 详细要求 灯饰串》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、LuminairesPart 2-20: Particular requirements Lighting chainsBS EN 60598-2-20:2015Incorporating corrigendum December 2016(IEC 60598-2-20:2014)BSI Standards PublicationBS EN 60598-2-20:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 60598-2-20:2015. It is ide

2、ntical to IEC 60598-2-20:2014, incorporating corrigendumDecember 2016. It supersedes BS EN 60598-2-20:2010, which will be withdrawn on 30 December 2017.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by IEC corrigendum December 2016 is

3、 indicated in the text by g67g68.The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/4, Luminaires.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publicatio

4、n does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 97030 6ICS 29.140.40Compliance with a British Standard cannot confer immunity fro

5、m legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2015.Amendments/corrigenda issued since publicationDate Text affected28 February 2017 Implementation of IEC corrigendum December 2016EUROPEAN STANDARDNORME EUROPEN

6、NEEUROPISCHE NORMEN 60598-2-20 January 2015 ICS 29.140.40 Supersedes EN 60598-2-20:2010English Version Luminaires - Part 2-20: Particular requirements - Lighting chains (IEC 60598-2-20:2014) Luminaires - Partie 2-20: Exigences particulires - Guirlandeslumineuses (IEC 60598-2-20:2014) Leuchten - Teil

7、 2-20: Besondere Anforderungen - Lichterketten(IEC 60598-2-20:2014) This European Standard was approved by CENELEC on 2014-12-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st

8、andard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A versio

9、n in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cr

10、oatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,Tur

11、key and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and

12、 by any means reserved worldwide for CENELEC Members. Ref. No. EN 60598-2-20:2015 EEN 60598-2-20:2015 - 2 - Foreword The text of document 34D/1145/FDIS, future edition 4 of IEC 60598-2-20, prepared by SC 34D “Luminaires” of IEC/TC 34 “Lamps and related equipment” was submitted to the IEC-CENELEC par

13、allel vote and approved by CENELEC as EN 60598-2-20:2015. The following dates are fixed: g120 latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-09-30 g120 latest date by which the national standards

14、 conflicting with the document have to be withdrawn (dow) 2017-12-30 This document supersedes EN 60598-2-20:2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any

15、 or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60598-2-20:2014 was approved by CENELEC as a Euro

16、pean Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60598-2-21 NOTE Harmonized as EN 60598-2-21. BS EN 60598-2-20:2015- 3 - EN 60598-2-20:2015 Annex ZA (normative) Normative references to international

17、publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the ref

18、erenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available he

19、re: www.cenelec.eu Publication Year Title EN/HD Year IEC 60227-5 2011 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) - - IEC 60238 - Edison screw lampholders EN 60238 - IEC 60245-4 2011 Rubber insulated cables - Rated voltages up

20、 to and including 450/750 V - Part 4: Cords and flexible cables - - IEC 60320 Series Appliance couplers for household and similar general purposes EN 60320 Series IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 60598-1 - Luminaires - Part 1: General requirements and

21、 tests EN 60598-1 - IEC 60906 Series IEC system of plugs and socket-outlets for household and similar purposes - - IEC 61184 - Bayonet lampholders EN 61184 - IEC 61347-2-11 - Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires EN 61347-2-1

22、1 - IEC 61347-2-13 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules EN 61347-2-13 - IEC 61984 2008 Connectors - Safety requirements and tests EN 61984 2009 ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - Par

23、t 4: Paper and board grades and converted products - - BS EN 60598-2-20:2015 2 IEC 60598-2-20:2014 IEC 2014 CONTENTS 20.1 Scope 6 20.2 Normative references . 6 20.3 Terms and definitions 7 20.4 General test requirements 7 20.5 Classification of luminaires 7 20.5.1 General 7 20.5.2 Protection against

24、 electric shock 7 20.5.3 Protection against dust, solid objects and moisture . 8 20.6 Marking . 8 20.6.1 General 8 20.6.2 Lighting chain marking 8 20.6.3 Lighting chain and packing marking 8 20.6.4 Packing or instruction marking 8 20.7 Construction 9 20.7.1 General 9 20.7.2 Lampholders 9 20.7.3 Term

25、inal blocks 10 20.7.4 Terminals and supply connections 10 20.7.5 Gaskets . 10 20.7.6 Mechanical strength . 10 20.7.7 Lamp bridging devices 10 20.7.8 Control units . 10 20.7.9 Lamp rotation . 11 20.7.10 Lamp insertion/withdrawal force 11 20.7.11 Lamp mechanical requirements 11 20.8 Creepage distances

26、 and clearances . 12 20.9 Provisions for earthing . 12 20.10 Terminals 12 20.11 External and internal wiring 12 20.11.1 General 12 20.11.2 Cables for lighting chains . 12 20.11.3 Cord anchorage test . 13 20.11.4 Plugs and cable length . 13 20.11.5 Maximum length of extendable class II lighting chain

27、s . 13 20.12 Protection against electric shock 13 20.12.1 General 13 20.12.2 Divisible plug 13 20.12.3 Electrification of decorations . 14 20.12.4 Contacts of push-in lampholders . 14 20.12.5 Blanking plugs 15 20.13 Endurance tests and thermal tests . 15 20.13.1 General 15 20.13.2 Test voltage . 15

28、20.13.3 Lamp bridging devices 16 BS EN 60598-2-20:2015IEC 60598-2-20:2014 IEC 2014 3 20.13.4 Short-circuit test of rectifier 16 20.14 Resistance to dust, solid objects and moisture . 16 20.15 Insulation resistance and electric strength 16 20.16 Resistance to heat, fire and tracking 17 Annex A (norma

29、tive) Requirements for interconnecting connectors for use in lighting chains . 18 Bibliography 20 Figure 1 Example of a connector to a divisible plug for lighting chains . 14 Figure 2 Example of test device suitable for checking security of lampholder contacts . 15 Table 1 Cables for lighting chains

30、 . 12 BS EN 60598-2-20:2015 6 IEC 60598-2-20:2014 IEC 2014 LUMINAIRES Part 2-20: Particular requirements Lighting chains 20.1 Scope This part of IEC 60598 specifies requirements for lighting chains fitted with series, parallel or a combination of series/parallel connected light sources for use eithe

31、r indoors or outdoors on supply voltages not exceeding 250 V. For combinations where rope lights (also known as sealed lighting chains) are included, see IEC 60598-2-21. Lighting chains provided with fixed or detachable attachments e.g. ornamental or decorative, are considered to be covered by this

32、standard. For lighting chains fitted with lampholders of the push-in type, the appropriate requirements of this standard applies. NOTE 1 A Christmas tree lighting chain is an example of a lighting chain fitted with series or series/parallel connected lamps. A chain for illuminating ski-tracks or pro

33、menades is an example of a lighting chain fitted with parallel connected lamps. For lighting chains with non-standardised lamps (e.g. lamps of the push-in type) the lamps are regarded as a part of the lighting chain and consequently included in the testing. NOTE 2 For products where the lighting cha

34、in is permanently fixed to a frame or pre-lit Christmas tree the relevant clauses of IEC 60598-2-4 and/or IEC 60598-2-7 can also apply. NOTE 3 In some countries the term “strings“ is used instead of “chains“. NOTE 4 Candlestick luminaries are tested according to IEC 60598-2-4. 20.2 Normative referen

35、ces The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC

36、 60227-5:2011, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) IEC 60238, Edison screw lampholders IEC 60245-4:2011, Rubber insulated cables Rated voltages up to and including 450/750 V Part 4: Cords and flexible cables IEC 60320 (a

37、ll parts), Appliance couplers for household and similar general purposes IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60598-1, Luminaires Part 1: General requirements and tests BS EN 60598-2-20:2015IEC 60598-2-20:2014 IEC 2014 7 IEC 60906 (all parts), IEC System of plugs and

38、 socket-outlets for household and similar purposes IEC 61184, Bayonet lampholders IEC 61347-2-11, Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires IEC 61347-2-13, Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. suppli

39、ed electronic controlgear for LED modules IEC 61984:2008, Connectors Safety requirements and tests ISO 4046-4:2002, Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products 20.3 Terms and definitions For the purpose of this document, the terms and defini

40、tions given in IEC 60598-1 as well as the following apply. 20.3.1 lighting chain luminaire comprising an assembly of series-connected lamps, parallel-connected lamps or series/parallel-connected lamps and interconnecting insulated conductors Note 1 to entry: For lighting chains with non-standardised

41、 lamps (e.g. lamps of the push-in type) the lamps are regarded as part of the chain. Note 2 to entry: For lighting chains with non-removable lamps, the lamps are regarded as part of the chain. Note 3 to entry: A lighting chain may incorporate control devices (e.g. flasher units, see 20.7.8). Note 4

42、to entry: Unless otherwise stated, references to lamps within this standard also refer to LEDs. 20.3.2 rope light sealed lighting chain lighting chain with non-replaceable light sources enclosed in a rigid or flexible insulating translucent pipe or tube, sealed at the ends, with or without joints No

43、te 1 to entry: Covered by IEC 60598-2-21. 20.4 General test requirements The provisions of Section 0 of IEC 60598-1 apply. The tests described in each appropriate section of IEC 60598-1 shall be carried out in the order listed in this part of IEC 60598. 20.5 Classification of luminaires 20.5.1 Gener

44、al Lighting chains shall be classified in accordance with the provisions of Section 2 of IEC 60598-1 together with the requirements of 20.5.2 and 20.5.3. 20.5.2 Protection against electric shock Lighting chains shall be classified as Class II or Class III. BS EN 60598-2-20:2015 8 IEC 60598-2-20:2014

45、 IEC 2014 20.5.3 Protection against dust, solid objects and moisture Lighting chains for outdoor use shall have a protective index IP 44 or higher. 20.6 Marking 20.6.1 General The provisions of Section 3 of IEC 60598-1 apply together with the requirements of 20.6.2 to 20.6.4. 20.6.2 Lighting chain m

46、arking The following information shall be marked on the lighting chain: rated voltage of the complete chain; rated wattage of the complete chain. Where the information is on the cable, it shall be marked on a durable non-removable sleeve or label. 20.6.3 Lighting chain and packing marking The follow

47、ing marking shall be placed on the lighting chain and on the accompanying packing of lighting chains for indoor use only. “FOR INDOOR USE ONLY”. As an alternative to the text, the lighting chain can be marked with the symbol SOURCE: IEC 60417-5957 (2004-12). The symbol shall be explained in the inst

48、ructions. NOTE In some countries (UK and Australia) national requirements are such that a plug must be fitted to a portable appliance. In situations where this plug does not provide the same ingress protection of the lighting chain information concerning the location of the plug/transformer may be g

49、iven e.g. “Plug/transformer for indoor use only“. 20.6.4 Packing or instruction marking The following or similar marking shall be placed on the accompanying packing or instructions. a) For all lighting chains where the packing has not been adapted for display purposes: “Do not connect the chain to the supply while it is in the packing”. b) For lighting chains with replaceable lamps: voltage and wattage or manufacturers article number of replacement lamps; “Do not remove or insert lamps while the