BS EN 16120-2012 Child use and care articles Chair mounted seat《儿童使用和保育用品 椅安装座》.pdf

《BS EN 16120-2012 Child use and care articles Chair mounted seat《儿童使用和保育用品 椅安装座》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16120-2012 Child use and care articles Chair mounted seat《儿童使用和保育用品 椅安装座》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16120:2012Child use and care articles Chair mounted seatCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction

2、 or networking permitted without license from IHS-,-,-BS EN 16120:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16120:2012.The UK participation in its preparation was entrusted to TechnicalCommittee CW/1/1, Seating.A list of organizations represented on t

3、his committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 71228 9ICS 9

4、7.140; 97.190Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for

5、 Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16120:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16120 November 2012 ICS 97.140; 97.190 English Version Child use and care articles - Chair mo

6、unted seat Articles de puriculture - Rehausseurs de chaise Artikel fr Suglinge und Kleinkinder - Sitzerhhungen fr Sthle This European Standard was approved by CEN on 29 September 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

7、 this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three offici

8、al versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of A

9、ustria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw

10、eden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national

11、 Members. Ref. No. EN 16120:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16120:2012EN 16120:2012 (E) 2 Contents Page Foreword 41 Scope 52 Normative references 53

12、Terms and definitions .54 Test equipment 54.1 Test probes for finger entrapment .54.2 Test mass A 64.3 Test foam 64.4 Small parts cylinder .64.5 Feeler gauge .75 General 75.1 Product conditioning .75.2 Test conditions 85.3 Application of forces .85.4 Tolerances 85.5 Order of test .86 Chemical hazard

13、s - Migration of certain elements (see A.2) .87 Thermal hazards (see A.3) 98 Mechanical hazards (see A.4) .98.1 Hazards due to height adjustment or folding of the product 98.1.1 General 98.1.2 Unintentional release of locking mechanism(s) .98.1.3 Test method for the durability of the locking mechani

14、sms 98.2 Entrapment hazards (see A.4.1) 108.2.1 Entrapment of fingers 108.3 Hazards due to moving parts (see A.4.2) . 108.3.1 Requirements for compression points . 108.3.2 Requirements for shear points 108.4 Entanglement hazards (see A.4.3) 118.4.1 Requirements 118.4.2 Test method . 118.5 Choking an

15、d ingestion hazards (see A.4.4) . 118.5.1 Requirements 118.5.2 Test methods . 118.6 Suffocation hazards (see A.4.5) 128.7 Hazardous edges, corners and protruding parts (see A.4.6) . 138.8 Hazards from inadequate structural integrity (see A.4.7) . 138.8.1 Static strength . 138.8.2 Dynamic strength 13

16、8.9 Chair attachment system . 148.9.1 Requirements 148.9.2 Test methods . 148.10 Restraint system . 158.10.1 Requirements 158.10.2 Test methods . 158.11 Hazards due to inadequate size (see A.4.8) . 168.11.1 Requirement for products not supported on top of the backrest of the chair . 168.11.2 Require

17、ment for products supported on top of the backrest of the chair 16Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16120:2012EN 16120:2012 (E) 3 8.11.3 Test method for produ

18、cts not supported on top of the backrest of the chair 168.11.4 Test method for products supported on top of the backrest of the chair . 189 Product information 199.1 General . 199.2 Marking of the product 199.2.1 Requirements . 199.2.2 Durability of marking . 209.2.3 Test method for durability of ma

19、rking . 209.3 Purchase information 209.4 Instructions for use . 20Annex A (informative) Rationales 22A.1 Introduction 22A.2 Chemical hazards (see Clause 6) . 22A.3 Thermal hazards (see Clause 7) . 22A.4 Mechanical hazards (see Clause 8) . 22A.4.1 Entrapment hazards (see 8.2) 22A.4.2 Hazards due to m

20、oving parts (see 8.3) 22A.4.3 Entanglement hazards (see 8.4) . 23A.4.4 Choking and ingestion hazards (see 8.5) 23A.4.5 Suffocation hazards (see 8.6) . 23A.4.6 Hazardous edges, corners and protruding parts (see 8.7) . 23A.4.7 Hazards from inadequate structural integrity (see 8.8) . 23A.4.8 Hazards du

21、e to inadequate size (see 8.11) . 23Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16120:2012EN 16120:2012 (E) 4 Foreword This document (EN 16120:2012) has been prepared b

22、y Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standa

23、rds shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Interna

24、l Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel

25、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or net

26、working permitted without license from IHS-,-,-BS EN 16120:2012EN 16120:2012 (E) 5 1 Scope This European Standard specifies safety requirements and test methods for chair mounted seats intended to be fixed on an adult chair to raise the sitting position of a child able to sit unaided up to an age of

27、 3 years or a maximum weight of 15 kg. The European Standard does not apply to products only aimed at restraining the child on a chair without raising the childs sitting position. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are

28、 indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-3:1994, Safety of toys Part 3: Migration of certain elements EN 1103, Textiles Fabrics for apparel

29、 Detailed procedure to determine the burning behaviour EN ISO 2439, Flexible cellular polymeric materials Determination of hardness (indentation technique) (ISO 2439) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 chair attachment system sys

30、tem designed to attach the chair mounted seat to the adult chair 3.2 restraint system system to restrain the child within the chair mounted seat 3.3 waist restraint device to restrain the child in the waist area 3.4 crotch restraint device to fit between the childs legs 4 Test equipment 4.1 Test pro

31、bes for finger entrapment Probes made from plastics or other hard, smooth material of diameters 701,0mm and 121,00+mm with a full hemispherical end that can be mounted on a force-measuring device, see Figure 1. Mesh probe made from plastics or other hard, smooth material as shown in Figure 2. Copyri

32、ght European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16120:2012EN 16120:2012 (E) 6 Dimensions in millimetres Key 1 line scribed around circumference showing depth of penetration Probe

33、 type 7 mm probe 12 mm probe Diameter A 01,0-7 1,0012+Radius RB 3,5 0,2 6 0,2 Figure 1 Test probes with hemispherical end Dimensions in millimetres Figure 2 Test probe for mesh 4.2 Test mass A A cylindrical bag with a diameter of 180 mm filled with sand to a total mass of 10 kg. 4.3 Test foam Soft f

34、oam sheet (for example polyurethane) having a thickness of 25 mm with a bulk density of (30 2) kg/m3and an indentation hardness index of 170 20 according to EN ISO 2439. 4.4 Small parts cylinder Small parts cylinder for the assessment of small components, having dimensions in accordance with Figure

35、3. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16120:2012EN 16120:2012 (E) 7 Dimension in millimetres Figure 3 Small parts cylinder 4.5 Feeler gauge Gauge with a thickn

36、ess of (0,4 0,02) mm and an insertion edge radius of (3 0,5) mm (see Figure 4). Dimensions in millimetres Figure 4 Feeler gauge 5 General 5.1 Product conditioning Before testing, any fabrics used shall be cleaned or washed and dried twice in accordance with the manufacturers instructions. Copyright

37、European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16120:2012EN 16120:2012 (E) 8 5.2 Test conditions The tests shall be carried out at a temperature of (20 5) C. The tests are designed

38、to be applied to chair mounted seats that are fully assembled and ready for use in accordance with the manufacturers instructions. If the chair mounted seat can be assembled or adjusted in different ways, the most onerous combination shall be used for each test. 5.3 Application of forces The forces

39、in the static load tests shall be applied sufficiently slowly to ensure that negligible dynamic force is applied. 5.4 Tolerances Unless otherwise stated, the following tolerances apply: Forces: 5 % of the nominal force; Masses: 0,5 % of the nominal mass; Dimensions: 1,0 mm of the nominal dimension;

40、Angles: 2 of the nominal angle; Positioning of loading pads: 5 mm; Duration of forces: 1 s. The tests are described in terms of the application of forces. Masses can however be used: 1 kg mass may be used for 10 N force. Unless otherwise specified, the test forces may be applied by any suitable devi

41、ce which does not adversely affect the results. 5.5 Order of test Unless otherwise stated, the requirements of Clause 8 shall be assessed on the same chair mounted seat in the order listed in this standard. 6 Chemical hazards - Migration of certain elements (see A.2) The migration of elements from c

42、oatings of paint, varnish, lacquer, polymer and similar coatings on exterior surfaces shall not exceed the following amounts: Antimony: 60 mg/kg Arsenic: 25 mg/kg Barium: 1000 mg/kg Cadmium: 75 mg/kg Chromium: 60 mg/kg Lead: 90 mg/kg Mercury: 60 mg/kg Selenium: 500 mg/kg Copyright European Committee

43、 for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16120:2012EN 16120:2012 (E) 9 These limits shall be verified in accordance with the test method given in EN 71-3:1994. Where a surface is coated with a

44、multi-layer of paint or similar coating, the test sample shall not include the base material. A separate sample may be used for these tests. 7 Thermal hazards (see A.3) When tested in accordance with EN 1103 there shall be no flash effect. These requirements apply to parts with an area greater than

45、310 cm. A separate sample may be used for these tests. 8 Mechanical hazards (see A.4) 8.1 Hazards due to height adjustment or folding of the product 8.1.1 General Chair mounted seats in which the height of the sitting area can be adjusted shall have locking mechanism(s), complying with 8.1.2, to mai

46、ntain the chair mounted seat in its position of normal use. Chair mounted seats in which the base can be folded for storage shall have locking mechanism(s), complying with 8.1.2, to maintain the chair mounted seat in its position of normal use. Chair attachment systems shall not be considered as loc

47、king mechanisms for height adjustment of the sitting area. Inflatable systems shall be fitted with non-return valves. 8.1.2 Unintentional release of locking mechanism(s) To avoid the hazards due to unintentional release of locking mechanisms, one of the following conditions shall be fulfilled before

48、 and after testing in accordance with 8.1.3: a) at least one locking mechanism requires an operating force greater than 50 N, or b) at least one locking mechanism is released by the use of a tool, or c) height adjustment requires at least two consecutive actions, the first of which shall be maintained while the second is carried out, or d) height adjustment requires at least