BS EN 13304-2009 Bitumen and bituminous binders - Framework for specification of oxidised bitumen《沥青及沥青粘合剂 氧化沥青的规范框架》.pdf

《BS EN 13304-2009 Bitumen and bituminous binders - Framework for specification of oxidised bitumen《沥青及沥青粘合剂 氧化沥青的规范框架》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13304-2009 Bitumen and bituminous binders - Framework for specification of oxidised bitumen《沥青及沥青粘合剂 氧化沥青的规范框架》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 13304:2009ICS 75.140; 91.100.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDBitumen andbituminous binders Framework forspecification ofoxidised bitumenThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on

2、30 April2009 BSI 2009ISBN 978 0 580 63911 1Amendments/corrigenda issued since publicationDate CommentsBS EN 13304:2009National forewordThis British Standard is the UK implementation of EN 13304:2009. Itsupersedes BS EN 13304:2003 which is withdrawn.The UK participation in its preparation was entrust

3、ed to TechnicalCommittee B/510/19, .A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Sta

4、ndard cannot confer immunityfrom legal obligations.Bitumen and related productsBS EN 13304:2009EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13304March 2009ICS 75.140; 91.100.50 Supersedes EN 13304:2003 English VersionBitumen and bituminous binders - Framework for specification ofoxidised bitume

5、nsBitumes et liants bitumineux - Cadre de spcifications desbitumes oxydsBitumen und bitumenhaltige Bindemittel -Spezifikationsrahmen fr oxidiertes BitumenThis European Standard was approved by CEN on 10 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which sti

6、pulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard e

7、xists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards b

8、odies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUR

9、OPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13304:2009: EBS EN 13304:2009EN

10、13304:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Properties and test methods 44 Typical grades 5BS EN 13304:2009EN 13304:2009 (E) 3 Foreword This document (EN 13304:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is

11、held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the poss

12、ibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13304:2003. According to the CEN/CENELEC Internal Regulations, the national standards or

13、ganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

14、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 13304:2009EN 13304:2009 (E) 4 1 Scope This European Standard provides a framework for the specification of oxidised bitumens used mainly in roofing, waterproofing, adhesives and thermal and phonic insulations. Wit

15、hin Europe several types of oxidised bitumens are used and, dependent on climatic conditions, type of building construction and traditional practices, different grades may be used for the same purpose. The framework given in this European standard provides a basis for quality agreements to be establ

16、ished between supplier and client. The oxidised bitumen products are graded by a combination of the values of ring and ball softening point, and penetration at 25 C, expressed as multiples of 5. 2 Normative references The following referenced documents are indispensable for the application of this d

17、ocument. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1426, Bitumen and bituminous binders Determination of needle penetration EN 1427, Bitumen and bituminous binders Determination o

18、f the softening point Ring and Ball method EN 12592, Bitumen and bituminous binders Determination of solubility EN 12593, Bitumen and bituminous binders Determination of the Fraass breaking point EN 13301, Bitumen and bituminous binders Determination of staining tendency of bitumen EN 13302, Bitumen

19、 and bituminous binders Determination of viscosity of bitumen using a rotating spindle apparatus EN 13303, Bitumen and bituminous binders Determination of the loss in mass after heating of industrial bitumen EN 15326, Bitumen and bituminous binders Measurement of density and specific gravity Capilla

20、ry-stoppered pyknometer method EN ISO 2592, Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000) 3 Properties and test methods The specification of oxidised bitumens shall be made according to the rules given in Table 1: BS EN 13304:2009EN 13304:2009 (E) 5 Table 1 Prope

21、rties and test methods Property Test methods Unit Limits and tolerance Ring and ball softening point aEN 1427 C 5 of mid-point valuee Penetration at 25 CEN 1426 0,1 mm 5 of mid-point valuee Solubility in toluene b EN 12592 % 99,0 Loss in mass after heating EN 13303 % 0,5 Flash point EN ISO 2592 C 25

22、0 Fraass breaking point EN 12593C NR cStaining properties EN 13301 mm NR cDynamic viscositydEN 13302 Pas NR cDensity EN 15326kg/m3NR caRing and ball softening point testing for oxidised bitumens are carried out in glycerol, as the values typically are above 80 C. bIf other solvents are used, it shal

23、l be stated in the test report. cNR: No requirements. Values can be agreed between the client and the supplier dThe type of instrument used to determine viscosity should be agreed between supplier and client. eMid-point value: value which defines the ring and ball softening point class or the penetr

24、ation class.4 Typical grades Typical grades for oxidised bitumens are: 85/25; 85/40; 95/25; 95/35; 100/40; 105/35; 110/30; 115/15. EXAMPLE 85/25 means that the ring and ball softening point of the product is between 80 C and 90 C and penetration between 20 x 0,1 mm and 30 x 0,1 mm. NOTE This list do

25、es not imply that all grades are available in all countries, neither is it intended to be comprehensive or limiting. Other grades may be supplied in accordance with the local practices and by agreement between client and supplier. BS EN13304:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4

26、 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standa

27、rds are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis

28、British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically

29、 receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on th

30、e Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational

31、standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI

32、are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standa

33、rds via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted unde

34、r the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementi

35、ng the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: